"Welcome Bay Girl'

Hi, today in pink for the welcoming of a sweet baby girl.

Heartfelt Creations Products and products carried by Heartfelt Creations website:

HCDP1-2116 Tender Moments paper collection

HCDC-3914 Baby’s Air balloon cling stamp set

HCD1-7299 Baby’s Air balloon die set

HCDC-3915 Welcome Baby cling stamp set

HDC1-7300 Welcome Baby cling stamp set

HCDC-3916 Baby’s Friends cling stamp set

HDC1-7301 Baby’s Friends cling stamp set

HCD1-7192 Eyelet Lace Frame die set

Ranger Archival Ink RACP505 Sepia

Ranger Archival Ink RACP475 Libaray Green

Ranger Archival Ink RACP649 Pink Peony

DDOTS 3D Foam Dots

3D1844 3-D Crystal Lacquer

159723 Designer Dries Clear Adhesive

OTHER PRODUCTS USED:

Inks: Ecocline Brush Pens- 738 Cold Grey Light, 666 Pastel Green, 226 Pastel Yellow, 390 Pastel Rose.

Other: Diamond stickles, White card stock, Hot glue gun, Fussy cutting scissors, scissors, Double sided tape, 3D foam double sided tape, Card (e.g. cereal box)

INSTRUCTIONS:

This card measures 6 ¼” x 8 ¼” when finished.

Taking the white cardstock and make a tent fold card to the above measurements. Taking the paper sheet 4B from the paper collection and trim this to a little smaller than the card base. This will be your card front. Taking the Pink Peony ink and a inking tool, bring color to the card base edges and the paper card front. Adhere the card front to the card base. Taking the white cardstock, cut the lace frame from the eyelet die set and with the Pink Peony ink, bring the color to the lace frame with the  inking tool. Adhere to the card front.

Taking the white card stock,  and the stamps and dies used for this card., make the embellishments. The embellishment stamping and cutting  list: From card, die cut x4 the air balloon, x4 the sentiment tag. From the white card stock stamp and cut: x1 the air balloon, x1 the sentiment tag, x1 the baby girl, x3 the sheep, x7 the longer rose cluster, x 2 the smaller rose cluster seen in the photo, x 2 the rose cluster with the swirl.

Bring color to all the elements. Adhere all the elements that need it together. Cut away the basket from the balloon at the ropes. Adhere the balloon to the lace card front. Adhere the basket so that you have room for the sheep to be sitting on the basket edge. Adhere the sheep in place. Layer the rose cluster over the feet of the sheep. Adhere the sentiment to the basket once the sentiment is stamped. Layer and adhere the rest of the roses as you go trim as needed. Adhere a boarder of the roses along the foot of the card and to the right. Adhere the darker pink sheep to the right then add the baby girl words. Tuck and adhere the extra rose buds and leaves needed as fillers behind the sheep. Once all is secure and placed, apply the diamond stickles to the roses and hearts then the crystal clear to the sheep and baby girl words. Put aside to dry.

I can't get enough of this collection on card.

Today is the last of the extra posts...we go back to normal and post again next Wednesday with this adorable collection.

Till then have scrappy moments and big inky hugs...

and not last and least....keep safe.

OXO

Finaily it's here....the release day...for the 'Tender Moments' collection"

...here my first card made wirh the new collection..

"Welcome Baby Boy"

 ....you will want it all for sure this month, that is, the whole collection. 

The collection is so cute with all the little critters. Ideal for a baby card or just because the critters are adorable to share.

Heartfelt Creations Products and products carried by Heartfelt Creations website:

HCDP1-2116 Tender Moments paper collection

HCFB1-487 Large Wild Rose Shaping Mold

HCFB1-486 Small Wild Rose Shaping Mold

HCDC-3914 Baby’s Air ballon cling stamp set

HCD1-7299 Baby’s Air ballon die set

HCDC-3915 Welcome Baby cling stamp set

HDC1-7300 Welcome Baby cling stamp set

HCDC-3916 Baby’s Friends cling stamp set

HDC1-7301 Baby’s Friends cling stamp set

HCPC-3906 Small Wild Rose cling stamp set

HCD1-7289 Small Wild Rose die set

HCPC-3907 Large Wild Rose cling stamp set

HCD1- 7290 Large Wild Rose die set

HDC1-7271 Round Window Frame die set

Ranger Archival Ink RACP505 Sepia

Ranger Archival Ink RACP656 Sky Blue

Ranger Archival Ink RACP475 Libaray Green

Ranger Archival Ink RACP436 Leaf Green

 Ranger Archival Ink RACP482 Olive

Ranger Archival Ink RACP005 Sunflower

DDOTS 3D Foam Dots

159723 Designer Dries Clear Adhesive

HCST1-401 Deluxe Flower Shaping Kit

HCDA1-449 Stack and Store Daubers pack of 6

OTHER PRODUCTS USED:

Inks: Ecoline Brush Pens- 738 Cold Grey Light, 666 Pastel Green, 226 Pastel Yellow, 390 Pastel Rose, 579 Pastel Violet. Spectrum Noir Harmony Inks- Lemon Tonic

Other: Diamond stickles, White; card stock, Hot glue gun, Fussy cutting scissors, scissors Double sided tape, 3D foam double sided tape, Card (e.g. Cereal box), Score-pal, Gesso

INSTRUCTIONS:

This card measures 6 ¼” x 8 ¼” when finished.

Taking the white cardstock and make a hinged tent fold card to the above measurements. Taking the paper sheet 3B from the paper collection and cut this a little smaller than the card base. This will be your card front. Taking the Sunflower ink and a inking tool, daubers, bring color to the card base edges and the paper card front. Adhere the card front to the card base.

Taking the white cardstock cut the lace frame using the Round Window Frame die, with the Blue sky    ink and, bring the color to the lace frame with the  inking tool, dauber.

Taking the white card stock,  and the stamps and dies used for this card, make the embellishments. The embellishing list:  x6 the balloon, x2 the Koala’s x1 the Raccoon,  x1 the Elephant, x6 a larger sized flower (to make 2 flowers), x10 a smaller sized flower (to make 2 flowers and 1 bud), 15 the leaves, x1 baby and boy, x8 both baby and boy from card.

Once the elements are stamped and die cut bring color to them by using the inks and ecocline pens.  Bring shape to the flowers and leaves using the flower shaping molds and the deluxe flower shaping tool kit. Adhere the card die cuts to the words baby and boy. For the balloon, trim away the ropes on 4 of the balloon. From the remaining balloons trim away one on the left and the other on the right. Using the score-pal, make a score line in the centre of each balloon and make the fold. Adhere all the folds together but making sure you have the ropes and basket on each outside. Adhere the baskets together so they form one basket. Make the flowers and leaves ready to adhere in place.

Adhere the lace frame in place then the air balloon, when adhering the basket in place do this only around the edges so you can slip the Koala’s into the basket. Do this. Adhere the baby boy in place then the flowers and leaves. Last adhere the raccoon and elephant above the flower cluster. When all is secured apply the stickles to the flowers on the critters and the edges of the words. Apply also to the hearts on the air ballon. With your finger or a sponge apply a little gesso on the air balloon edges, the lace edges and the leaves and flowers.

So, so cute. This will bring a smile  to anyone.

well...it was worth the wait.

See you tomorrow with more of this yum eye candy.

Yes we will be posting everyday for three days to catch up from the delay.

"Congratulations Girl"

The second day of yummy 'Tender Moments' collection

Heartfelt Creations Products and products carried by Heartfelt Creations website:

HCDP1-2116 Tender Moments paper collection

HCFB1-486 Small Wild Rose Shaping Mold

HCDC-3914 Baby’s Air balloon cling stamp set

HCD1-7299 Baby’s Air balloon die set

HCDC-3915 Welcome Baby cling stamp set

HDC1-7300 Welcome Baby cling stamp set

HCDC-3916 Baby’s Friends cling stamp set

HDC1-7301 Baby’s Friends cling stamp set

HCPC-3906 Small Wild Rose cling stamp set

HCD1-7289 Small Wild Rose die set

Ranger Archival Ink RACP505 Sepia

Ranger Archival Ink RACP475 Libaray Green

Ranger Archival Ink RACP649 Pink Peony

Ranger Archival Ink RACP005 Sunflower

DDOTS 3D Foam Dots

159723 Designer Dries Clear Adhesive

3D1844 3D Crystal Lacquer

HCDH1-449 Stack and Store Daubers pack of 6

OTHER PRODUCTS USED:

Inks: Ecocline Brush Pens- 738 Cold Grey Light, 666 Pastel Green, 226 Pastel Yellow, 579 Pastel Violet, 579 Pastel Rose, Spectrum Noir Harmony Inks- Winter Rose. Other:Diamond stickles, White; card stock, Hot glue gun, Fussy cutting scissors, scissors Double sided tape, 3D foam double sided tape, Wooden cocktail prick or tooth pick, inking tool, score-pal, Yellow bling Ryne stones, Card (e.g. cereal box), Crop-a-dile

INSTRUCTIONS:

This card measures 6 ¼” x 8 ¼” when finished.

Taking the white cardstock and make a hinged tent fold card to the above measurements.

Taking the paper sheet  6B from the paper collection and cut this a little smaller than the card base. This will be your card front. Taking the  Winter Rose ink and a inking tool, bring color to the card base edges and the paper card front. Adhere the card front to the card base.

Taking the white card stock,  and the stamps and dies used for this card, make the embellishments. The embellishing list: 1x the air balloon, 4x the air balloon cut from card, x4 the sentiment tag from the air balloon from card, x1 the sentiment tag cut from the basket, x1 the sentiment as a banner(congratulations), x14 smaller flower(makes 7 flowers),x2 side flower cluster with the swirl,  x6 smallest rose, x2 piglets-closed eyes, x1 piglet with open eyes. Once all elements are coloured with the inks and pens bring shape to the flowers using the flower shaping mold. The flowers are made using 2 petal layers for each bloom. Adhere the bling crystals to the centre of the flowers then apply a little diamond stickles to the flower canters. Make the banner by cutting to fit the sentiment leaving space so you can make 2 holes to slot the cocktail pricker in to them. Apply a little green ink to color the wood.

Adhere the air balloon together. Trim the basket away from the balloon there will be room to adhere all the embellishments to the basket. Adhere the air balloon to the card front then the basket, making sure you leave enough room for the flowers and piglets. Arrange and adhere the flowers across the basket edge then the piglets. Tuck and adhere the small roses and trimmed leaves between the lager flowers. Adhere the Baby Girl sentiment to the basket. Adhere the 4 flowers across the air balloon then adhere the small roses on both ends. Adhere the banner sentiment behind the left piglet. Apply the diamond stickles to the sentiment and the small flowers to highlight them.

So, so, so cute!

...such an adorable collection.

Tomorrow there is another post, so see you here.

Inky hugs

Update for the "Tender Moments" collection,

For all those that have been waiting for this to arrive....we have a date 

June 24th...2 more sleeps...lol.

Then it's going to be one big party!

A little birdie told me...some great news!!!!!

.....the Tender collection has arrived on US soil....

yay

Hear is a sneaky peak of what you get to see here in the comming weeks.

Yes it is going to be worth the wait. As soon as it is here we will let you know....

till then inky hugs

OXO

Inspiration Wednesday at Heartfelt Creations again,

today, I am showing off with this eye candy....

I adore this 'Cascading Petals" collection, I hope you do too.

Heartfelt Creations products and products carried by Heartfelt Creations used in this project: 

HCDP1-2115 Cascading Petals Paper Collection

HCPC-3911 Wisteria Petals cling stamp set

HCD1-7295 Wisteria Petals die set

HCPC-3912 Cascading Wisteria cling stamp set

HCD1-7296 Cascading Wisteria die set

HCPC-3913 Floral Song cling stamp set

HCD1-7297 Floral Song die set

HCD1-7298 Decorative Cage die set

HCPC-3568 Moments With You Sentiments (large sentiment circle)

HCPC-3848 Cheerful Note Sentiments (feel better soon)

HCPC-3848 Merry Bright Accents cling stamp set

HCD1-7196  Merry Bright Accents die set

359760 Embossing powder-Gold

85-glitter Crystal Ultrafine Transparent Glitter ½ oz.

RAHT Heat It Craft Tool

409311 Color In Watercolor Brush-Fine

159723 Designer Dries Clear Adhesive

352854 Metal Tip for Adhesive Bottles.

HCDA2-450 Stack and Store Daubers-Pack of 30

Hydra sponge

Flower Shaping Tool Kit

HCGP1-488 Luxe Gold Cardstock

DDOTS Double Dots 100pc.-3D foam circles

RACP475   Ranger Archival Ink Pad- Library Green

359848 Spellbinders Tool N’ One

368771 Score-Tool

DMCT4185 Groove Golf Tool Set

173842 Score-Pal Measuring & Scoring Board

Other products used:

Beading wire, Seed beads, wire cutting scissors, Fussy cutting scissors, SUP embossing folder-country floral, Hot glue gun, Versa-mark, Inks: Spectrum Noir- Pine tree, Crushed velvet, Spring meadow, Grasshopper. Creative Artist water colour box (a local brand of water colour blocks). Double sided 3D foam tape, double sided tape, Inking tools, White card stock.

INSTRUCTIONS:

This card when finished measures 8 ½” x 6 ¾” (21cm x 17.5cm)

Taking the white card stock make a tent fold card by cutting 2 of the above measurements. Scoring from the top the width of one of the  cards, this will be the back part of the card base. Adhere the double side tape to this area. When the card is completed remove the protection tape and adhere both card pieces together. You can make a larger card this way without wasting a lot of card stock.

Finding the design paper from the collection Sheet 11B. Cut this a little smaller than the card front, also cut a piece of paper to measure the same as the embossing folder. Taking the Crushed velvet ink and the inking tool, ink all the edges of the card base and the edges of the matting. Do this to the embossed paper also the raised embossing.  Adhere all to the card base using 3D foam tape.

Taking the gold cardstock cut the cage twice, trim away some of the cage so the swirls remain. Bring a curve into the cage tops. Adhere the cage points to the centre  of the card edge adhere the other end of the cage to the card, making sure the curve stays in the cage. See the photo of the card.

Taking the stamp for the sentiments and the gold embossing powder make the sentiments. Bring the grasshopper ink onto the sentiments and the glitter.

Make all the embellishments for the card. The branch with only leaves x5, the leaf branch with 3 wisterias x 1 the leaf branch with 2 wisteria’s x 1. The gold beads from the gold cardstock stamped with gold embossing powder x5. Each wisteria cluster is made with 3 petals. There are 41 clusters.

The wisteria clusters are made as so: cut the wire to 4” for each cluster. When the petals are still damp when they have been shaped using the flower mold, wrap them over a shaping tool and squeeze tight to shape the petals more. When these are dry use the pocking edge from the golf tool. Thread the bead onto the wire and twist to secure. Thread the wire through the hole in the petal, use the hot glue gun to secure the petals together. Once you have made all the clusters, place and wrap the wires to the wisteria shape. Make the wisteria flowers different lengths so when placed they will be in a natural form. Apply the clear drying glue with a hydra sponge and dip into the glitter, set aside to dry.

Adhere all the elements to the card by first placing the circle sentiment then the leaves and branches. Last the wisterias. A branch with only leaves and the sentiment across the front of the wisterias. To finish the card, use the stamped gold beads as fillers in and about the leaves.

It is alot of work to make these flowers but the challenge is worth it and the resaults are....well what can I say...you can take it to what ever leavel you want too.

Inky hugs and happy flower making to you....

A bit more eye candy to enjoy.