Heartfelt Creations inspiration Wednesday again...

....bringing you a cute card using the snowflake die from the snow globe die set.

HARTFELT CREATIONS PRODUCT AND PRODUCT CARRIED BY HEARTFELT CREATIONS WEBSITE:

HCDP1-2118 Festive Winterscapes paper collection

HCPP-475 Deluxe flower shaping paper pack of 50 – white

HCPP1-438-2 white paper cardstock

HCPC-3921 Festive Winterscapes cling

HCD1-7311 Festive Winterscapes diel

HCPC-3884 Candy Cane Cottage cling (sentiment)

HCD1-7306 Decorative circle frames die set

HCPC-3881 Christmas Poinsettia cling

HCD1-7249 Christmas Poinsettia die

HCFB1-478 Christmas Poinsettia 3D shaping mold

RACP656 Ranger Archival ink Sky blue

RACP505 Ranger Archival ink Sepia

RACP670 Ranger Archival ink Tiger Lily

RACP436 Ranger Archival ink Leaf Green

ANC814 Prills Lettus-Entertain-You

3D1844 Crystal Lacquer

RLH5100 Hydra Sponges

159723 Designer dries clear adhesive

173842 Scor-Pal measuring and scoring board

85-glitter Crystal ultrafine transparent glitter

HCDA1-449 Stack and store daubers pack of 6

OTHER PRODUCTS USED:

Ranger Archival ink Cornflower Blue, Hot glue gun, Double sided tape

Card board (as in, an empty cereal box), Paper distressing tool

Fussy cutting scissors, White card stock, Foam inking tools

Stapler, Buttons galore and more - Sparkletz: Starry sky. Si;ver card stock.

INSTRUCTIONS:

This card when completed measures 5 ¼” x 5 ¼” (13.5cm x 13.5cm)

Taking the white card stock make the card tent fold base to the above measurements. Finding the sheets 1B and 2B cut 2 mattings a little smaller than each other and smaller than the card base. Using the paper distressing tool, distress the edges of the matting papers. Adhere to the card front. Using the Decorative circle frames die cut the lace frame from the white card stock. Colour this with the cornflower blue ink and a foam inking tool. Adhere this also to the card front. With the luxe silver card stock and the snow flake centre from the snow globe, die cut x1 then adhere this to the centre of the lace frame on the card front.

To make the poinsettias: The small flowers- each flower has 2 layers. Stamp and die cut x8 petals. The colours used are baby blue and tiger lily. The larger flowers have x3 layers. Stamp and die cut x6 petals. The colours used are cornflower blue and leaf green. Once they have been shaped with the matching flower mold and adhered together, clear drying glue is applied with the hydra sponge and then dipped into the glitter. Once the glitter is dry and excess tapped away, glue is applied to the flower centre then the prills are sprinkled onto the glue. Once the glue has dried the flower is tapped so the excess prills will come away. Now they can be adhered to the project. The leaves are stamped x4 and coloured with the leaf green ink. These leaves are finished with an application of crystal lacquer.

To make the poinsettias: The small flowers- each flower has 2 layers. Stamp and die cut x8 petals. The colours used are baby blue and tiger lily. The larger flowers have x3 layers. Stamp and die cut x6 petals. The colours used are cornflower blue and leaf green. Once they have been shaped with the matching flower mold and adhered together, clear drying glue is applied with the hydra sponge and then dipped into the glitter. Once the glitter is dry and excess tapped away, glue is applied to the flower centre then the prills are sprinkled onto the glue. Once the glue has dried the flower is tapped so the excess prills will come away. Now they can be adhered to the project. The leaves are stamped x4 and coloured with the leaf green ink. These leaves are finished with an application of crystal lacquer.

The sentiment is made by stamping the sentiment “Winter Wishes” by masking the word cozy away. This is inked on the edge and using the distressing tool on both edges. Adhere across the snow flake so it finishes under the flower cluster on each side.

Aren't we glad we now have silver cardstock from Heartfelt Creations to add to the stash.

Till next time,

inky hugs to all

Number 2 Heartfelt Creations inspiration for this Wednesday ....

....this time it is a card made using a snow globe. Have fun.

HARTFELT CREATIONS PRODUCT AND PRODUCT CARRIED BY HEARTFELT CREATIONS WEBSITE:

HCDP1-2118 Festive Winterscapes paper collection

HCPP-475 Deluxe flower shaping paper pack of 50 – white

HCPP1-438-2 white paper cardstock

HCPC-3922 Woodsy Winterscapes cling

HCD1-7312 Woodsy Winterscapes die

HCPC-3921 Festive Winterscapes cling

HCD1-7311 Festive Winterscapes diel

HCPC-3881 Christmas Poinsettia cling

HCD1-7249 Christmas Poinsettia die

HCFB1-478 Christmas Poinsettia 3D shaping mold

RACP505 Ranger Archival ink Sepia

RACP482 Ranger Archival ink Olive

RACP436 Ranger Archival ink Leaf Green

ANC814 Prills Lettus-Entertain-You

3D1844 Crystal Lacquer

RLH5100 Hydra Sponges

159723 Designer dries clear adhesive

173842 Scor-Pal measuring and scoring board

901 Krystellos shard glass 10z

247027 Fantastix blending tools

85-glitter Crystal ultrafine transparent glitter

HCDA1-449 Stack and store daubers pack of 6

  

OTHER PRODUCTS USED:

Ranger Archival ink Cornflower Blue, Hot glue gun, Double sided tape, Card board (as in, an empty cereal box), Fussy cutting scissors, White card stock, Foam inking tools, Silver card stock.

INSTRUCTIONS:

This project measures5 ¼” x 4 ¼” (13.2cm x 11cm) when finished.

To make the snow globe card base, use the white card stock and the snow globe die cut two outer shapes. Taking the scor-pal make a fold at the top of the globe on one of the die cuts for the fold. Apply double sided tape to this then adhere the two die cuts together. This will form your tent fold globe base. Using the silver card stock and x4 pieces of card board, die cut the snow globe frame and inner circle to make a globe with a hole in it. Adhere all together, then adhere this to the globe card front with the clear drying glue. Find the sheet 1B in the paper collection and die cut the inner circle from this paper, the sky and stars should be showing once it is adhered in the globe ready to be embellished. Die cut with the silver cardstock the embellishment in the globe foot. Die cut also x4 from the cardboard. Adhere together then cut in half. Adhere one half to each side of the globe above the globe foot so this will peep out under the leaves later.

To add the glass snow on the outside of the globe, apply an ample amount of clear drying glue to the outside edge to the globe then dip this into the shaved glass. While the glue is drying make the embellishments. Stamp, colour and die cut the following.

The trees, x3. The colours used for the trees are leaf green, olive and sepia. The leaves in the trees are highlighted with the crystal lacquer. The deer, x2 stamped and x4 from cardboard. The colour used is sepia and finished with the crystal lacquer. The leaves, x2, the colour used is leaf green and finished again with the crystal lacquer. The poinsettias, each flower has 3 layers. For this card,  x6 lager sized petals and x3 smaller sized petals. The colours used are leaf green and corn flower blue. Once they have been shaped with the matching flower mold and adhered together, clear drying glue is applied with the hydra sponge and then dipped into the glitter. Once the glitter is dry and excess tapped away, glue is applied to the flower centre then the prills are sprinkled onto the glue. Once the glue has dried the flower is tapped so the excess prills will come away. Now they can be adhered to the project.

Adhere all the embellishments to the globe as seen in the card photo using clear drying glue and the hot glue gun. When adhering the flowers, the smallest flower goes to the centre of the globe foot then one to each side of this. The leaves are

So easy and quick to make...this snow globe is going to be handy for any card.

Inky hugs....till next time.

FESTIVE WINTER SCAPES COLLECTION.....Wednesday inpiration day by Heartfelt Creations....

hi, today I am showing you a card made from the Starry Night stamp and die set...

have fun with this.

Do you remember?....I do....

HARTFELT CREATIONS PRODUCT AND PRODUCT CARRIED BY HEARTFELT CREATIONS WEBSITE:

HCDP1-2118 Festive Winterscapes paper collection

HCPP1-438-3 Kraft paper cardstock

HCPP1-438-2 white paper cardstock

HCPC-3920 Starrynight Winterscapes cling

HCD1-7310 Starrynight Winterscapes die

HCPC-3813 Todays quotes (sentiment)

HCD1-7306 Decorative circle frames die set

HCD1-7281 Stairway Gardens die set

RACP505 Ranger Archival ink Sepia

DDOTS Double sided 3D foam dots

159723 Designer dries clear adhesive

173842 Scor-Pal measuring and scoring board

85-glitter Crystal ultrafine transparent glitter

HCDA1-449 Stack and store daubers pack of 6

OTHER PRODUCTS USED:

Ranger Archival ink Cornflower Blue, Hot glue gun, Double sided tape, Card board (as in, an empty cereal box), Fussy cutting scissors, White card stock, Foam inking tools, Stapler.

INSTRUCTIONS: This slider card measures 8 ¼” x 7 ½” (22.2cm x 19.1cm) when completed.

Taking the kraft card stock make the slider card base by cutting 12” x 8 ¼”. Using the scor-pal make 2 score lines across the 8 ¼ “ edge at 2 ½” and 5”. Make the fold sharp by using the bone folder from the scor-pal. Cut the slider to ½’ X 4” The card front, 6 ¾” x 6 ¾” . Cut from a piece of paper or card stock scrap, 2” x  3 ¾” This is to be adhered a both  the 2” edge to the back of the card front 2” down from the top edge in the centre. The slider will later slide in this slider guide.

Taking from the paper collection sheet number 1b, make the matting for the card by cutting a little smaller than the card base, then distressing the edges before adhering in their place. This will be for the card front foot. (2 ½” x 8 ¼”), the card front. (6 ¼” x 6 ¼”), the card slider. ( 1 ½” x 4”) and the card background. (7” x 8 ¼”). When all is adhered to the card base, the slider is stapled to the card back in the centre then this can be slipped into the slider guide that is adhered at the back of the card front. The card base is now made.

Take the white card stock, the decorative circle frames die and the stairway gardens die then die cut the lacey frames. The stairway frame is coloured with the cornflower blue ink. Apply the clear drying glue with the hydra sponge then the glitter. The decorative circle lace frame is coloured with the sepia ink. Adhere the stairway garden frame to the card front. Using glue dots or circles cut from card board, adhere the decorative frame to the card front.

Using the snow globe die, the white cardstock, the cardboard and the collection paper sheet number 1B make the snow globe for the card front as so, die cut x1 from the white cardstock, die cut x2 from the cardboard Colour the white cardstock snow globe with the cornflower blue and the sepia ink. Adhere to the cardboard globe. Adhere to the lace frame on the card front. Taking the inter circle die from the snow globe die cut x1 the collection paper and x1 from the cardstock. Adhere together then ink the edges with the sepia ink. Adhere this circle to the snow globe.

For the embellishments:  taking the white card stock and the sepia ink stamp the building from the Starrynight stamp set twice from one inking.(this will give you two colours) Do the same with the camels and palm tree. Die cut from the cardboard: x3 for each camel, x3 for the building. Adhere together. For the building adhere the lighter coloured building so it will show in the doorway and trim away unwanted building so it looks like the one in the card photo. Apply glitter to the doorway. Adhere in place on the snow globe. Adhere the palm tree to the right side of the building. Adhere the camels to the card front.

Taking the white cardstock stamp the sentiments, cut out with the fussy cutting scissors and ink them with the cornflower blue and sepia ink. Adhere in place with the foam 3D dots to under the snow globe and the other to the slider where it is stapled to the card background. When the card is standing you will see this sentiment, when the card is lying flat the card front will cover this.

Did you enjoy the journey?....I did.

Happy scrappy i nky days...till next time.

Hugs

Double trouble today with the Heartfelt Creations inspiration

Ribbons and pinecones....

PRODUCTS USED MADE BY HEARTFELT CREATIONS  AND PRODUCTS CARRIED IN THEIR WEB STORE:

HCDP1-2117  Snowy Pines paper collection- Sheet 3b

HCPC-3917  Festive Pine Cones cling stamp set

HCD1-7302  Festive Pine Cones die set

HCD1-7305 Ornate Ovals die set

HCPC-3881  Christmas Poinsettia & Holly cling stamp set

HCD1-7249  Christmas Poinsettia & Holly die set

HCFB1-478 3D Christmas Poinsettia Shaping Mold

HCPC-3814  Words Of Encouragement (God arms me)

ANC814 Lettuce Entertain You Prills

RACP451 Ranger Archival Ink-Coffee

DDOTS Double Sided Foam Dots

159723 Designer Dries Clear Adhesive

HCDA1-449 Stack And Store Daubers pack of 6

HCPP1-475 Deluxe Flower Shaping Paper pack of 50-white

173842 Scor-Pal Measuring & Scoring Board

HCST1-401 Deluxe Flower Shaping Kit

OTHER PRODUCTS USED:

Spectrum Nior Harmony Inks- Grass Green , Grass Hopper, Honey Pot, Friar Brown, Chinese red.-Midas Inks- Blush. Other: Diamond Stickles, Double sided tape, 3D double sided foam tape, Inking tools, Misty stamping tool, White card stock 

INSTRUCTIONS:

This card measures  5 ¼” x 5 ¼” (13.5 cm x 13.5cm)when finished. Taking the white card stock, make a tent fold card base to the measurements. Ink the edges with the blush ink. Adhere the paper to the card base using 3D double sided foam tape or the 3D dots. Using the white card stock and the Oval Ornate largest die, make a lace frame. Using the blush ink, bring colour to the lace frame. Adhere the frame to the card front using the 3D double sided foam tape or the 3D dots.

Taking once again the white card stock and the large pine cone stamp, stamp this twice. Colour the images in with the colours listed. Die cut the image with the matching die. Trim away the pine leaves from one of the stamped images. This will be used later. Bring shape to the pine cone using the shaping tools. Adhere the two pine cones in place with the clear drying glue and the 3D foam tape or dots. Adhere the cut away pine leaves as fillers.

Make the poinsettias: Stamp, colour and die cut two flower petals and two holly leaves from the Christmas poinsettia sets. Us the matching mold to bring shape to the flower and leaf petals. Apply the prills to the flower centers. Adhere to the point where the bow and the pine cone meet.
To finish the card apply stickles to the pine needles and holly leaves. Put aside to dry.

Inky hugs, till next time.

The double trouble wednesday with the Heartfelt creations inspiration Wednesday...

HCDP1-2117  Snowy Pines paper collection- 3b Sheet

HCPC-3917  Festive Pine Cones cling stamp set

HCD1-7302  Festive Pine Cones die set

HCD1-7305 Ornate Ovals die set

HCPC-3881  Christmas Poinsettia & Holly cling stamp set

HCD1-7249  Christmas Poinsettia & Holly die set

HCFB1-478 3D Christmas Poinsettia Shaping Mold

HCPC-3814  Words Of Encouragement (God arms me)

ANC814 Lettuce Entertain You Prills

DDOTS Double Sided Foam Dots

159723 Designer Dries Clear Adhesive

HCDA1-449 Stack And Store Daubers pack of 6

HCPP1-475 Deluxe Flower Shaping Paper pack of 50-white

173842 Scor-Pal Measuring & Scoring Board

OTHER PRODUCTS USED:

Inks:- Spectrum Noir Harmony-Chinese red, Grass hopper, Friar brown, Grass green. : Midas Blush3D double sided tape, White card stock, Misti stamping tool.

INSTRUCTIONS:

This card measures 5 ¼” x 5 ¼” (13.5cm x 13.5cm) when finished. Taking the white card stock and make a tent fold card to the measurements. Taking the Midas blush ink and inking tool, ink the edges of this card base. Find the paper from the paper collection, sheet number 3b. Ink the edges using the Friar brown ink.

Taking the white card stock and the oval ornate dies, die cut one each of the lace frames. Ink the edges using the Midas blush for the largest frame and the Friar brown for the edges of this frame. Use the Friar brown for the smaller frame. Stamp the sentiment from the Words Of Encouragement stamp set. Adhere the frames to the card front by using the 3D Dots.

Stamp two of the pine cones onto the white card stock and colour the image in with the Friar brown for the pine cone and the Grass green, grass hopper and the honey pot for the pine needles. Die cut the pine cones using the matching die. Adhere the pine cones to the sides of the lace frame.

Make the poinsettias using the stamp, die set, colour the flowers using the Chinese red and the honey pot ink for the flowers and the grass hopper for the holly leaves. Use the shaping mold for the shaping.  For the flowers, two flower petals for each flower.  One set of holly leaves for each flower back. Apply the prills to the flower centres. Adhere the poinsettias to the centre of each pine cone spray.

It is not realy trouble but it was a double....double posting. I hope I have inspired you to use this collection in different ways.

Inky hugs ...till next time.