It's BLACK FRIDAY!

Over at Heartfelt Creations, they have all the goodies and eye candy.

Today they have a Black Friday discount you can't miss...so be sure to check it out

Here is my card made with the must have new release dies.

INSTRUCTIONS

This tent fold card measures 8 1/4“ x 5 3/4“ when completed.

Taking the white card stock to make the card base to the above measurements. Using the Vibrant Fuchsia  ink and a dauber, ink the edges of the card front base. Taking a piece of white card stock cut a matting a little smaller than the card base.  Adhere this to the card front with 3D foam tape or foam dots.

Find the design paper used for this card in the paper pad collection. Sheet 12B. Cut this also a little smaller than the new card front. Using the gold card stock and the corners found in the Simply Classic Oval Frame die set and die cut the four corners. Adhere these to the corners of the design paper then adhere this to the card front.

Using again the Simply Classic Oval Frame die set, the oval die, the design paper and the white card stock, die cut an oval shape from each then adhere them together. Now die cut the rest of the gold card stock elements used from this die set, the fancy oval and five leaf shapes. Also die cut from the gold card stock the Letters & Numbers die set, the words Thank You once each in the larger letter font. Die cut four layers for each letter in the white card stock. Adhere all together using the quick stick and the clear drying adhesive. Adhere the gold fancy oval frame to the design paper oval. Adhere this to the card front with 3D foam dots.

Using the white card stock, the sepia ink and the Vining Clematis Banner stamp and matching die, to make the banner. Use the water color brush, the Elderberry, Parakeet, Banan, and Pesto Green aqua pencils to color the banner. Using the deluxe shaping tools, bring shape to the vines and flowers. Make a curl in the banner by rolling this across your fingers, adhere the banner in place by using the foam dots in the banner centre and securing it at the ends to the oval with clear drying adhesive. Hold in place until the adhesive is dry.

Make the Clematis flowers by: Stamping, coloring and die cutting: three large petals and two smaller petals. Bring shape to the petals by using the collection 3D shaping mold. Use the pricking tool from the flower shaping set and make a hole in the petal centre, big enough to be able to get three folded stamens through it. Adhere in place by using the hot glue gun. When the hot glue is dry, trim off the excess stamen stems ready to use.

Adhere the clematises in place at each end of the banner. Cut in half the gold leaf shapes and adhere behind the flowers in pairs. Adhere with the hot glue gun. Adhere the sentiment to the banner by using the clear drying adhesive and the quick stick too

Heartfelt Creations Products and Product Sold On Their Web Site: HERE

HCDP1-2133  Floral Banner Paper Pad collection, 

HCPC-3970  Peony and Sunflower Banner cling, 

HCD1-7378  Peony and Sunflower Banner die

HCFB1-5009 3D Rustic Sunflower Shaping Mold

HCD1-7228 Lacy Diamond Frame die

HCD2-7371 Letters and Numbers die

HCST1-401 Deluxe Flower Shaping Kit

HCPP1-475 Deluxe Flower Shaping Card Stock Paper Pad- White- 50

HCGP1-488 Deluxe Gold  Card Stock

HCDA1-449 Stack and Store Daubers- Packet of 6

Designer Dries Clear Adhesive, Metal tip for Adhesive Bottles, Hydra Sponges, Score-pal Measuring and scoring Board, Quick stick Tool, Glitter-Ultra Fine, Color In Water color brush-fine, Double sided 3D Foam Dots , Spellbinders Tool ‘N One, Ranger Archival Inks: Sepia, Library Green, Sunflower, Leaf Green, Red Geranium

OTHER PRODUCTS USED:

Cream Organza Ribbon, Fussy cutting Scissors, Ruler, Black Sand, Pattern Making Tracing Tool, Foam Mat, Misti Stamping Tool, Double Sided 3D Foam Tape, Double Sided Tape, Hot Glue Gun, Ranger Archival Venation Orange ink.  

                     , , , 

If you have visited the Heartfelt Creations shop and blog you would have seen all the goodies and inspiration there....need I say more?

Till next time....have a safe happy scrappy day

Inky hugs Sus

 

Inspiration Wednesday with Heartfelt Creations

Today the inspiration comes from the Floral Banner collection.

This will be a collection I sure will be going to often. So adorable!!!!!!

Visit their online store to find all the products used for these card 

HERE

This slimline tent fold card measures 4“ x 8 1/4“ when completed. Use the white card stock to make the card base to the above measurements. First by cutting 8“ x 8 1/4 “ , make a fold at the 8“ edge so you get the tent fold.

Using the white card stock make a matting by cutting it a little smaller than the card base front, adhere this in place using the 3D foam tape or dots. Taking the sheet 12B from the collection paper pad, cut this a little smaller than the card front. Using the pattern making tracing tool, a ruler and a foam pad make holes along all the edges of the paper. Adhere this to the card front using 3D foam tape or double dots.

Taking both stamps from the Elegant Rose Banner set, the white card stock, sepia ink stamp twice the straight banner and the heart banner. Use the matching dies to die cut all images. Bring color to the images using the tea rose for the roses and Leaf Green for the leaves. Red Geranium for the heart shape.

Cut the heart shape in half in the length, this will be adhered to behind the straight banner with 3D dots or foam tape. Adhere this to the card front using the 3D foam dots or 3D foam tape. The remaining banners will be used later.

Taking the green organza ribbon, wrap this around the card front and across banner, adhere in place. Make a separate triple bow from the ribbon and adhere this to the right side of the banner by using the hot glue gun.

To make the OXO sentiment, die cut four layers for each letter from the white card stock using the larger size font from the Letters & Numbers die set. For the top layer of the OXO, use the gold deluxe card stock and the die cut once for each letter, adhere all together to form the sentiment. Adhere this to the banner on top of the ribbon with the clear drying adhesive.

Fussy cut the remaining stamped banner roses and leaves and adhere In place as fillers behind the heart. As seen in the project photo. Now adhere the roses and buds in place using the hot glue gun.

To make the roses: Stamp with sepia ink onto the white card stock-each medium sized rose has four petal layers. Nine roses and two buds in total. Bring color to the stamped images using a dauber and the tea rose ink. Shape using the matching mold and the deluxe flower shaping tools. Adhere together using the clear drying adhesive or the hot glue gun.

Once the roses are formed, apply a little adhesive to the roses and buds by using the hydra sponge, then sprinkle the glitter onto the roses and leave to dry. Tap away any excess glitter so they are ready to use.

 

For a printout of this project visit HERE

My next project today is this card...the floral frames are framed with the gold....just love it!

This tent fold card measures 6“ x 6“ when completed. Using the white card stock to make a card base to the above measurements. Taking the sheet 2B from the collection paper pad, cut this a little smaller than the card front. Using the pattern making tracing tool, a ruler and a foam pad make holes along all the edges of the paper. Adhere this to the card front using 3D foam tape or double dots.

Taking the gold card stock and the Eyelet Royal die cut two of the lace frames. Adhere this to the centre of the card front using the clear drying adhesive. There will be a gape, between the two frames, the banner will cover this.

To prepare the front banner, taking the straight rose banner, stamp this with the sepia ink on  white card stock that is 6“ in length as you will extend the banner when die cutting. Using the matching banner die, die cut the banner as so, place the stamped image on the sandwich plate making sure the end of the part you want extended will not be on the plate, so just before the end part of the die will not be in the sandwich. Tape to secure in place. Place the die now on the stamped image. Place the top plate edge to the end of the banner die, just to before the end of the stamped image so it will not cut the end part of the die. Thus you will be cutting only the sides of the banner and not the ends, so you get an extended banner.

Stamp and die cut one extra banner but do not extend this as it will be fussy cut and adhered to the extended banner.

Stamp the sentiment from the sentiment stamp set, the first sentiment with sepia ink and the second with the versa-mark and gold embossing powder. Add a little e gold embossing powder to the ends of the banner as well. Do this to the extended banner only.

Color the rose and leaf  images with the elderberry and Pesto Green, Bottle Green aqua pencils. Use the water brush to spread the colors. Fussy cut the smaller banner as so, the larger rose with two buds stay intact, the two roses are cut apart and used for under the sentiment banner as shown. Before adhering in place, bring shape to the flowers by using the deluxe shaping tools.

Adhere the banner and roses in place using the 3D foam tape or double dots. Adhere the fussy cut roses and leave in place by using the clear drying adhesive. To finish draw a line around the banner with the elderberry pencil then apply water to soften the line.

To find all the product used and a printout of this project, you can visit HERE

For so much more inspiration, you need to visit HERE...there is also print outs you can get of all the postings....have fun.

My next post will be featuring that special craft day of the year,,,yes 

BLACK FRIDAY! 

They do have a special BLACK FRIDAY for you.

Inky hugs and keep safe.

A new collection over at HEARTFELT CREATIONS

The new FLORAL BANNERS collection!!!!!

This is my 2nd most fav collection this year! Flowers always gets the first prize from me....lol.

For all the details and a print out of products and instructions visit:-https://www.heartfeltcreations.us/gallery/thank-you-sunflower-banner

******************

The second card I made for this weeks posting....

For the print out etc....visit:-https://www.heartfeltcreations.us/gallery/thank-you-so-much-banner

For more eye candy and inspiration on this wonderful collection, visit:-https://www.heartfeltcreations.us/blog/debuting-the-floral-banners-collection

All the HEARTFELT CREATIONS products and the products carried by HEARTFELT CREATIONS used for these cards are listed in the instructions and you can find them on their website HERE

I am hoping you are all well and safe. Have a happy scrappy week crafting and getting inky fingers.

Inky hugs and love, Susan

 

Hi, today featuring the 'Heart Throb' and the 'Seasonal Wreath' collection from Heartfelt CReations

Products used from the Heartfelt Creations collections and products sold on theirwebsite

HCDP1-2132 Seasonal Wreath Paper Collection 

HCD1-7375 Seasonal Wreath die set

HCPC-3967  Winter Seasonal Wreath Accents cling stamp set

HCD1-7374 Winter Seasonal Wreath Accents die set

HCPC-3966  Autumn Seasonal Wreath Accents cling stamp set

HCD1-7573 Autumn Seasonal Wreath Accents die set

HCPC-3965 Summer Wreath Accents cling stamp set

HCD1-7372 Summer Wreath Accents die set

HCD2-7371 Letters and Numbers die set

HCD2- 7327 Elegant Swirl Gateway die set

HCPP1-475  -Deluxe Flower Shaping Paper Pads pack of 50-white              

HCST1-401- Deluxe Flower Shaping kit

HCDA1-449- Stack and Store Daubers pack of 6

 OTHER:-

409311 Color in Water color Brush fine

RACP475 Ranger Archival Library Green ink

RACP482 Ranger Archival Olive ink

RACP669 Ranger Archival Viridian ink

RACP436 Ranger Archival Ink Leaf Green ink

RACP993 Ranger Archival Red Geranium ink

RACP005 Ranger Archival Sunflower ink

159723 Designer Dries Clear Adhesive

352954 Metal For Adhesive Bottles

173842 Scor-pal Measuring and Scoring Board

DDOTS- 3D Double Sided Foam Dots

3D1844 3D Crystal Lacquer 4 oz

 Other Products used:- Inks used: spectrum Noir aqua pencils: :- bison, persimmon, sunflower, cherry, mango, pesto green and cherry. Other: Paper trimmer, Hot glue gun, Double sided tape, Double sided 3D foam tape, Black sand, 12 “ x 12 “grey board, Sand paper.

INSTRUCTIONS: This Lay Out measures 12 “ x 12 “

Using the design paper sheet 9B in the collection paper pad and adhere this to the 12 “ X 12 “ grey board for the  lay out base. Find the design paper sheet 2B and trim this to 6 “ x 7 “ . Ink the edges with the Viridian ink then adhere this to the lay out base as seen in the project photo, a little to the lower right using the double sided foam tape

Die cut the torn lace frames by using the large lace frame from the Elegant Swirl Gateway die set and the paper sheet 2B, die cut two. Using  the lower part of the frame by tearing it to size then inking with the Viridian ink and layering so it will frame the two photo corner edges.. The photo size used for the lay out is, 2  3 / 4 “  x 3  3 / 4 “. The photo is backed with grey board and the edges are sanded with the sand paper.

Using the white card stock and the Library Green ink, stamp all needed embellishments for this project. Using the archival inks and the aqua pencils to color the stamped images. Archival inks used:- Bow: Viridian and Olive. Wheat: Sunflower. Granite Apples: Red Geranium and Leaf Green. Aqua pencils used:- Owls: Bison, Persimmon pencils. The flowers:  Sunflower, Cherry, Mango pencils.  Leaves: Pesto green and Cherry pencils. The hearts: Cherry pencil.

When all is done die cut the images using the matching die sets. Bring a little shaping to the elements by using the flower shaping tool kit. Adhere the elements to the lay out, clustering in the corner s as seen in the project photo. Use the hot glue gun and the clear drying adhesive to do this.

Make the sentiment by using the larger sized letters from the Letters and Numbers die set. Die cut four layers each letter from the white card stock and one layer each from  the 2B paper sheet. Adhere all the layers together before adhering to the lay out. Add the sand to the flower centres by applying the clear drying adhesive then sprinkling sand on the flowers. Add the leaves, flowers and the hearts to the photo sides as seen in the project photo. To finish the project add the crystal lacquer to the letters. 

Below are a few of my favorite close ups of this LO. These owls are sooooo cute!

 Now that he has grown to a ripe old age of over 18....he is still a heart throb....lol

Have a happy scrappy day.

Inky hugs.