"Just A Note"

Hello to all today, I love this cart! As soon as I saw it, I knew what I wanted to do with it....sharing with you today. Enjoy.

Heartfelt Creations Products And Products Carried On Our Website:

HCDP1-2104 Candlelit Christmas paper collection

HCFB1- 478 Christmas Poinsettia 3D Shaping Mold

HCPC-3881 Christmas Poinsettia & Holly cling stamp set

HCD1-7249 Christmas Poinsettia & Holly die set

HCPC- 3873 Sweet Shoppe cling stamp set

HCD1- 7237 Sweet Shoppe die set

HCPC-3848 Cheerful Note Sentiments cling stamp set

HCDA1-449 Stack and Store Daubers pack of 6

HCST1-401 Deluxe Flower Shaping Kit

DDOTS  Double Dots-3d foam circles

159723 Designer Dries Clear Adhesive

173842 Score-Pal Measuring and Scoring Board

359848 Spellbinders Tool N’ one

31510 Funnel tray

85-glitter Crystal Ultrafine Transparent Glitter

478455 Zig Clean Color Real Brush Makers

ANC814 Lettuce Entertain You Prills

RACP993 Ranger Archival ink Red Geranium

RACP436 Ranger Archival ink Leaf Green

RACP475 Ranger Archival ink Library Green

Other Products Used:

Diamond Stickles, SUP dazzling details, Sheena Douglas white stamping card, Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping tool, Spectrum Noir Harmony inks- Ocean Blue, Bordeaux., Round foam-inking tool. 

INSTRUCTIONS:

This completed card measures 6” X 6” (15cm X 15cm)

Taking the white card stock make a tent fold card measuring 6” x 6” / 15cm x 15cm. 

Using the Bordeaux ink and inking foam tool and ink the edges of the card base.

Find the printed-paper used from the Candlelit Christmas paper collection. Trim the paper to 6.10” X 6.10” (15.5cm X 15.5cm) Adhere the paper to the card front.

To make the Poinsettia flowers and Holly leaves, stamp the Candlelit Poinsettia’s and Holly leaves in the Library Green ink onto the white stamping card. Bring the color onto the images using the daubers and Archival inks Leaf Green and Red Geranium. When the coloring is finished, die cut all then bring shape to the flowers and leaves by using the 3D flower mold. Use the flower shaping tools to bring further shape if needed.  Stack three layers together and adhere together by using the hot glue gun. Apply clear drying glue to the petal points with a brush then dip into the glitter. Put aside to dry on the funnel tray. When dry, tap the flower on the side of the tray to eliminate any excess glitter. Apply clear drying glue to the poinsettia flower centers then pour the prills onto the flower. Taking a shaping tool press lightly on the prills, this will push the prills into the glue. Put aside to dry on the tray, when dry they are ready to use on your card.

Taking the white card, stamp color and die cut the flowers and holly leaves. Apply the glitter and prills to the flowers. 7 Flowers and 10 holly leaf sets are used for this card.

To make the flower cart: Taking the ‘Sweet Shoppe’ stamp and die sets prepare the flower cart. Die cut extra for the cart from the white stamping card. When the cart is trimmed ready for use adhere the extra card cuts. Arrange and adhere to the card front. Adhere the flowers to the cart. Adhere the umbrella in place then add a few flowers and holly leaves to the top of the umbrella using the hot glue gun.

To make the sentiment: Taking the sentiment stamp, stamp the sentiment with the Library Green ink. Trim the excess card away and add color to the edges. Adhere the sentiment to the card. Apply to the card stickles and dazzling details to bring attention to the elements featured.

I love poinsettias...so now I can use these flowers all year round...just change the color.

They are wonderfully show cased by using the Sweet Shoppe cart...which I might add I shall be using this a lot with other cards.

Happy scrapping for the next week, till then Sussipoppins inky hugs.

OXO

"Remembering With You"

Hi, today I am sharing with you a card made from the 'Candlelit Christmas' collection brought out by Heartfelt Creations, which can be used for any winter card. 

‘Remembering With You’

Heartfelt Creations Products And Products Carried On Our Website:

HCDP1-2104 Candlelit Christmas paper collection

HCFB1- 478 Christmas Poinsettia 3D Shaping Mold

HCPC-3881 Christmas Poinsettia & Holly cling stamp set

HCD1-7249 Christmas Poinsettia & Holly die set

HCPC-3882 Candlelit Poinsettia cling stamp set

HCD1-7250 Candlelit Poinsettia die set

HCPC- 3883 Glow of Christmas cling stamp set

HCD1-7251 Glow of Christmas cling stamp set

HCD1-7204 Arrows and Banner die set

HCPC-3848 Cheerful Note Sentiments cling stamp set

HCDA1-449 Stack and Store Daubers pack of 6

HCST1-401 Deluxe Flower Shaping Kit

DDOTS  Double Dots-3d foam circles

159723 Designer Dries Clear Adhesive

173842 Score-Pal Measuring and Scoring Board

359848 Spellbinders Tool N’ one

31510 Funnel tray

85-glitter Crystal Ultrafine Transparent Glitter

478455 Zig Clean Color Real Brush Makers

ANC805 Gilt Trip Prills

ACP436 Ranger Archival Ink- Leaf Green

ACP475 Ranger Archival Ink- Library Green

Other Products Used:

Diamond stickles, Sheena Douglas white stamping card, Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping tool, Inks: Spectrum Noir Harmony inks- Grasshopper, Lemon Tonic. Ranger Archival ink Cornflower Blue. Round foam-inking tool. Paper-distressing tool. Stickles: Golden rood, Platinum, Diamond

INSTRUCTIONS:

This completed card measures 6” X 6” (15cm X 15cm)

Taking the white card stock make a tent fold card measuring 6” x 6” / 15cm x 15cm. 

Using the Grasshopper ink and inking foam tool and ink the edges of the card base.

Find the printed-paper used from the Candlelit Christmas paper collection. Cut the blue paper to 6.10” X 6.10” (15.5cm X 15.5cm) and a second blue paper to 5.70” X 5.70” (14.5cm X 14.5cm) Distress this paper with the distressing tool. Adhere these papers to the card base. Taking the banner from the Arrows and banner dies set. Stamp the sentiment on the banner using the Library Green ink then bring color to the banner using the Grasshopper ink.

Taking the ‘Glow of Christmas stamp and die set to make the hanging lamps. Prepare 2 lamps. Color these using the zig markers of your choice. To make the Poinsettia flowers and Holly leaves, stamp the Candlelit Poinsettia’s and Holly leaves in the Library Green ink onto the white stamping card. Bring the color onto the images using the daubers and Archival inks Leaf Green and Cornflower Blue. When the coloring is finished, die cut all then bring shape to the flowers and leaves by using the 3D flower mold. Use the flower shaping tools to bring further shape if needed.  Stack three layers together and adhere by using the hot glue gun. Apply clear drying glue to the petal points with a brush then dip into the glitter. Put aside to dry on the funnel tray. When dry, tap the flower on the side of the tray to eliminate any excess glitter. Apply clear drying glue to the poinsettia flower centers then pour the prills onto the flower. Taking a shaping tool press lightly on the prills, this will push the prills into the glue. Put aside to dry on the tray, when dry they are ready to use on your card.

Stamp the candlelit image from the ‘Candlelit Poinsettia’ set. Trim away what is not needed and use as a background for the flower cluster. Adhere to the top right corner. Add the flowers adhering with the hot glue gun and the 3D foam glue dots. Add the two hanging lamps to the card front. Adhere the flowers to the lamps as seen in the card photo. Adhere the sentiment and flowers to the left lower corner. Finishing the card, apply the stickles to bring attention and color to the elements.

These hanging candle lamps are great for any card. You can always use different flowers to change the look of the card.

Have a happy scrappy week, till next time, 

Sussipoppins inky hugs

"On Your Special Day"

Hi, 

today I am showing a card from Heartfelt Creations, the 'Candlelit Christmas' collection. 

A way of using the collection to make a non christmas card.

Heartfelt Creations Products And Products Carried On Our Website: 

Candlelit Christmas paper collection

 Christmas Poinsettia 3D Shaping Mold

 Christmas Poinsettia & Hollycling stamp set

 Christmas Poinsettia & Hollydie set

 Candlelit Poinsettia cling stamp set

 Candlelit Poinsettia die set

 Starry Decorative die set

 Celebrate Love Sentiments clingstamp set

 Album Tags And Accents die set

 Stack and Store Daubers pack of 6

 Deluxe Flower Shaping Kit

  Double Dots-3d foam circles

Designer Dries Clear Adhesive

Score-Pal Measuring and ScoringBoard

Spellbinders Tool N’ one

 Funnel tray

 Crystal Ultrafine TransparentGlitter

Ranger Archival Ink Library

 Ranger Archival Ink Red Geranium

Other Products Used:

Diamond stickles, Sheena Douglas white stamping card, Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping Tool. Inks: Spectrum Noir Harmony inks: Grasshopper, Honey Pot, Midnight, Ranger Archival Saffron. Paper distressing tool.
 Lettuce Entertain You Prills

For more tips on creating with the Candlelit Christmas collection, watch the tutorial at https://youtu.be/PJeFD_d3AiM.

Instructions: This completed card measures 6” X 6” (15cm X 15cm) 

Taking the white card stock make a tent fold card measuring 6” x 6” / 15cm x 15cm.

Find the printed-paper used from the Candlelit Christmas paper collection, cut the blue paper to 6.10” X 6.10” (15.5cm X 15.5cm) and the yellow paper to 5.70” X 5.70” (14.5cm X 14.5cm) Taking the paper distressing tool, distress all sides of both matting papers.

 Taking a sheet of white card die cut the Starry night decorative die twice so you can make a circle. Also cut the boarder die twice.  Die cut the sentiment band using the Album Tags and Accents die set.  Cut the outer band from white card and the inner from the yellow printed-paper used in the matting. Using the Harmony inks and daubers bring the colour to the doily and sentiment band as seen in the photo. Stamp the sentiment then construct the boarder band together as seen in the card photo. Adhere all to the card front using glue and the 3D foam dots.

 To make the Poinsettia flowers and Holly leaves: Make enough for 5 flowers and 10 holly large leaf sets- Stamp the Candlelit Poinsettia’s and Holly leaves in the Library Green ink onto the white stamping card. Bring the colour onto the images using the daubers and Archival inks, Red Geranium, Leaf Green and Saffron. When the colouring is finished, die cut all then bring shape to the flowers and leaves by using the 3D flower mold. Use the flower shaping tools to bring further shape if needed.  Stack three layers together and adhere together by using the hot glue gun. Apply clear drying glue to the petal points with a brush then dip into the glitter. Put aside to dry on the funnel tray. When dry, tap the flower on the side of the tray to eliminate any excess glitter. Apply clear drying glue to the poinsettia flower canters then pour the prills onto the flower. Taking a shaping tool press lightly on the prills, this will push the prills into the glue. Put aside to dry on the tray, when dry they are ready to use on your card.

Adhere the flowers at each side of the sentiment banner in clusters. Three flowers on the left and two flowers on the right. Add the leaves where needed under the poinsettias, see the card photo.

 Finish the card by applying stickles to the sentiment and stars on the boarder and doily. Add clusters of stickle dots at each end of the flower clusters to extend the cluster. See the photo.

A fun card to make...I just love all those cute poinsettias.

Till next week, have a scrappy inky time.

Sussipoppins hugs

OXO

Crafters Companion: Fruit Of The Vine "With Love" card today

Hi, 

today I am show casting the "Fruit Of The Vine" background layering stamps by Crafters Companion.

Enjoy.

PRODUCT LIST: 

Fruit Of The Vine background layering stamp CC-ST-CA-BKFRU

With Love stamp and die set GEM-STD-WIT

Sheen Douglas white stamping card SD-STCARD

Layered Peony stamp and die set NG-PEO-STD-LAYP

Nautical Ship Deck 3D embossing folder S-NAUT-EFS-3D-SHDE

MEASUREMENTS:

The card base size- 14.5cm x 18.8cm

The embossing size- 11.8cm x 16.4cm

Stamped background size: 10.4cm x 14.7cm 

See you next time, till then inky hugs

Sussipoppins

"Thinking Of You"

Hi, 

today I have for you a card featuring the layered stamping background from Crafters Companion.

Here is the product list and measurements for this card.

Crafters Companion Product Used:

Bees in the Border CC-ST-CA-BKBEE

Rock-A-Blocks

Spectrum Noir Harmony Inks: Grasshopper, Honey pot.

Water Brush Pens CC-WTBRSH-M3PC

Layered Peony stamp and die set

Nautical Ship Deck 3D embossing folders NAU-EFS-3D-SHDE

Sheens Douglas White Stamping Card ST-STCARD

Diesire Classiques Only Words “Thinking Of You” DS-C-THINK

Other products used: 

Glue gun, Double sided tape, 3D Double sided foam tape, Glue, Balling tools and mat, Matching ribbon, Diamond Stickles .  Card stock: Yellow, brown. X2 Brads.

Measurements:

Card base: 20cm x 16.5cm

1^st Card matting: 18.8cm x 15.4cm (yellow)

2^nd Card matting: 17.9cm x 14.3cm (yellow)

Embossing matting: 16.8cm x 12cm (brown)

Card front stamping: 13cm x 9.2cm

 A sweet and simple card. I love these background stamps....and you can use them in so many ways. A great investment.

Most of the products above can be found at: https://www.hobbidee-breda.nl

A Happy Camping Congratulations To You....

Hi, today I have for you a new Happy Camper card full of fun crafting...

enjoy the journey.

Heartfelt Creations Products And Products Carried On Their Website:

 HCDP1-2103 Happy Camper paper collection

HCPC-3878 Happy Camper cling stamp set

HCD1-7242 Happy Camper die set

HCPC-3879 My Happy Place cling stamp set

HCD1-7243 My Happy Place die set

HCPC- 3880 Elements Of Home cling stamp set

HCD1-7244 Elements Of Home die set

HCPC-3874 Purr-fect Posies cling stamp set

HCD1-7238 Purr-fect Posies die set

HCPC_3869 Haven Of Daydreams cling stamp set

HCD1-7203 Ornamental Tags die set

HCPC-3847 Celebrate Love Sentiments cling stamp set

HCFB1-476 3D Purr-fect Posies Shaping Mold

 HCS1-457-2 Pastel Pearl Stamens medium

HCDA1-449 Stack and Store Daubers pack of 6

HCST1-401 Deluxe Flower Shaping Kit

HCDA1-449 Daubers

HCPP1-468 Deluxe Flower Shaping Paper Pack Of 25-White 

159723 Designer Dries Clear Adhesive

173842 Score-Pal Measuring and Scoring Board

359848 Spellbinders Tool N’ one

31510 Funnel tray

85-glitter Crystal Ultrafine Transparent Glitter

3D1844 Crystal Lacquer

478455 Zig Clean Color Real Brush Makers

RACP451 Coffee Archival Ink

Other Products Used:

Diamond stickles, Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping Tool, Spectrum Noir Harmony Inks: Frozen Lake, Foam inking tool, Teal-Green (Matching) craft foam. Sheena Douglas stamping card, Card,

Instructions:

The finished size of this card is 6.30” x 6.30” (16cm x 16cm)

Taking the white card stock, make a tent fold card measuring 6.30” x 6.30” (16cm x 16cm). Taking the Frozen Lake ink and inking tool or a dauber and ink the edges of the card front.

Look for the flag print in the paper collection, cut this a little smaller than the card front.

Ink the edges with the Frozen lake ink.

Taking the stamping card and cut this to 5.51” x 5.51” (14cm x14cm) Ink the edges with the Frozen lake ink. Taking the stamp from the Haven of day dreams stamp set and the coffee ink, stamp the trees. Bring colour to the trees with the zig markers.

To make the sentiment, using the sentiment lacy die from the ‘Ornamental Tags’ die set, the sentiment stamp from the ‘Celebrate Love’ set, the craft foam and the checked paper from the paper collection. Die cut, stamp then adhere all together.  Apply the diamond stickles to the lace edges on the sentiment then put aside to dry.

To make the flowers, stamp the Purr-fect Posies in the coffee ink onto the white stamping card then bring the colour to the image using the zig markers, Light Blue and Yellow. When finished coloring die cut all the images. You can bring shape to the die cuts by using the 3D flower mold. Use the flower shaping tools to bring further shape if needed. Make a hole in the center of the flower with the pointed end from the spellbinders tool. Thread the blue stamens through the whole adding another flower layer if wanted. Secure all together by using the hot glue gun at the back of the flower petal and stamen thread. When you have applied the glitter with clear drying glue and all is dry, trim the stamen threads away ready for use on the card. When making the leaves, also run them through the mold.

Stamp, colour and die cut the flags and lights, apply the diamond stickles to the light bulbs. Stamp, colour and die cut the caravan. Die cut the door and window out of this caravan. Die cut four extra caravans, windows and the doors from the card, adhere these together including the coloured parts. Adhere the caravan to the card front. Adhere the flags and lights to the top of the card. Adhere the prepared sentiment to the left of the caravan, hiding the wheel. Adhere the flowers and leaves in place under the sentiment and to the right side of the caravan. Apply the diamond stickles to the caravan trim, the window frames and doorframe. Apply the crystal Lacquer to the windows. To finish the card, add a few lights across the door

 Next week we have a new Heartfelt Creations collection to share with you all......

...soooooo...fun!

Till your next visit, happy scrappy inky fun.

Sussipoppins hugs

"Sending Hugs"

Hi an adorable card with hugging bears,

This card is featuring those wonderful layered background stamps from Crafters Companion. This one is called "Fruit Of The Vine"....and the Layered Peonies give it that finishing pop. Got to have flowers on the cards...lol

Crafters Companion Product Used:

Background Layering Stamps-Fruit Of The Vine CC-ST-CA-BKFRV

Stamp and die set- Sending Hugs GEM-STD-SEN

Stamp and die set: Layered peonies

Embossing Folder 3D- Flourishing Frame EF5-3D-FLFR

Sheena Douglas White stamping card SD-STCARD

Spectrum Noir Harmony inks: Grasshopper, Damson Wine

AQUA by Spectrum Noir markers: Clay, Sandstone.

Water Brush Pens CC-WTBRSH-M3PC

Glitter pen

Other products used:

2 Brads, Silver glitter embossing powder, Heat gun, Glue gun, Double sided tape, 3D Double sided foam tape, Glue, Balling tools and mat, Matching lace, Matching mauve card stock. Hot glue gun.

Measurements:

Card base size: 18cm x 13.1cm

Embossing layer: 16.8cm x 12cm

Background layer Stamping layer: 13cm x9.2cm

Most products used for this acrd can be found here: https://www.hobbidee-breda.nl

Till next time have a scrappy inking time.

Hugs