"Cozy Winter Wishes"

Heartfelt Creations Products And Products Carried On Their Website:

HCDP1-2105 Candy Cane Cottage paper collection

HCPC- 3884 Candy Cane Cottage cling stamp set

HCPC-3885 Merry Moments cling stamp set

HCD1-7254 Merry Moments die set

HCPC- 3886 Season Of Glee cling stamp set

HCD1-7255 Season Of Glee cling stamp set

HCD1-7256 Heart of Joy Decorative die set

HCD1-7201 Ticket and Tags die set

DDOTS  Double Dots-3d foam circles

159723 Designer Dries Clear Adhesive

173842 Score-Pal Measuring and Scoring Board

359848 Spellbinders Tool N’ one

31510 Funnel tray

85-glitter Transparent Glitter

478455 Zig Clean Color Real Brush Makers

RACP451 Archival Ink Coffee

Other Products Used:

SUP dazzling Details glitter glue, Sheens Douglas white stamping card, Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping Tool, white organza ribbon.

# Click HERE to see the video on this collection

INSTRUCTIONS:

This finished card measures 6 ¼” X 8” (15.9cm x 20.3cm)

Taking the white card stock make a tent fold card measuring 6 ¼” X 8” (15.9cm x 20.3cm)

Find the blue design paper found in the paper collection. Cut this a little smaller than the card base measurements. Adhere this to the card base using 3D foam tape. To make the background lace, take the white card and the ‘Heart of Joy Decorative die’ set. Using the outer die from the set make two ½ circles. Using the two inner dies from the set, die cut two ½ circles. Trim any unwanted card away. Apply clear drying glue to the inner lace circle then dip into the glitter. Do the same to the outer circle but only to the edge lace part of the ½ circle. Put aside to dry in the funnel tray.  When dry adhere to the card base using the 3D foam dots.

To make the sentiment banner, taking the white stamping card and the ‘Ticket and Tags’ die set, die cut the banner base and inner banner. Stamp the sentiment onto the inner banner using the stamp from the Candy Cane Cottage’ stamp set and the coffee ink. Adhere all together. Using the organza ribbon, bring this across the sentiment banner; adhere at the back of the banner. Make a triple bow from the organza ribbon and adhere to the left side of the banner using the hot glue gun. Adhere the banner in place using the 3D foam dots.

Make the little animals by using the stamp and dies sets. Bring color to the animals by using the zig markers. Fussy cut the needed penguins away from the die cut images. Adhere in place to the left above the ribbon bow and to the right of the sentiment. Apply the dazzling details glitter glue to the hats and scarves of the animals.

The Bear and Penguins are so adorable...you won't want to stop using them....more crafting fun next week.

Till then have a happy scrappy inking fun.

XOX

Sussipoppins xx

"Cozy Winter Wishes"

Hi, here is another Oh so cute card from the 'Candy Cane' collection from Heartfelt Creations

Heartfelt Creations Products And Products Carried On Their Website:

 Candy Cane Cottage paper collection

HCPC-3885 Merry Moments cling stamp set

 Merry Moments die set

HCPC- 3886 Season Of Glee cling stamp set

 Season Of Glee cling die set

Heart of Joy Decorative  die set

HCPC-3885 Christmas Poinsettia cling stamp set

 Christmas Poinsettia die set

HCPC- 3883 Glow of Christmas cling stamp set

 Glow of Christmas die set

 Christmas Poinsettia 3D Shaping Mold

HCST1-401 Deluxe Flower Shaping Kit

 Daubers

 Double Dots-3d foam circles

Designer Dries Clear Adhesive

Score-Pal Measuring and ScoringBoard

 Spellbinders Tool N’ one

 Funnel tray

 Transparent Glitter

 Lettuce Entertain You Prills

 Express-O Yourself Prills

 Zig Clean Color Real Brush Makers

RACP451 Archival Ink Coffee

RACP475 Archival Ink Library Green

RACP436 Ranger Archival Ink Leaf Green

RACP993 Ranger Archival Ink Red Geranium

RACP454 Ranger Archival Ink Blue

Other Products Used:

SUP dazzling Details glitter glue, Diamond stickles, Sheens Douglas white stamping card, Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping Tool, Ranger inking tool, 3D Bling crystal stickers.

Inks: Spectrum Noir Harmony Inks: Midnight, Honey Pot, Grasshopper. Ranger Archival Ink Saffron

For more tips on creating with the Candy Cane Cottage Collection watch the tutorial at
https://youtu.be/8Twf2bi7Lgk

INSTRUCTIONS:

The finished card measures 6 ¼” X 8” (15.9cm x 20.3cm)

Taking the white card stock make a tent fold card measuring 6 ¼” X 8” (15.9cm x 20.3cm). Bring color to the card base by using the Honey Pot ink and the foam inking tool/dauber.  Find the blue printed background in the paper collection. Cut this a little smaller than the card base. Apply the Leaf Green ink to the edges of this paper then adhere to the card base.

Taking the white stamping card and the ‘Heart of Joy Decorative Die’ die set, die cut this twice. Using the out side die and the centre die pieces together. Bring colour to the die cuts by using the Midnight ink and the inking tool or dauber

To make the Poinsettia flowers and Holly leaves: Stamp the Candlelit Poinsettia’s and

Holly leaves in the Library Green ink onto the white stamping card. Bring the color onto the image using the daubers and Archival inks. Saffron, Red Geranium, Manganese Blue, Saffron and leaf green. When finished coloring, die cut all then bring shape to the flowers and leaves by using the 3D flower mold. Use the flower shaping tools to bring further shape if needed.  Stack three layers together and adhere together by using the hot glue gun. Apply clear drying glue to the petal points with a brush then dip into the glitter. Put aside to dry on the funnel tray. When dry, tap the flower on the side of the tray to eliminate any excess glitter. Apply clear drying glue to the poinsettia flower centers then pour the prills onto the flower. Taking a shaping tool press lightly on the prills, this will push the prills into the glue. Put aside to dry on the tray, when dry they are ready to use on your card

To make the penguins skating on ice for this card: Taking the Stamp from the ‘Season of Glee’ stamp and die sets. Stamp and die cut the base twice; die cut the two skating penguins once. Bring color to the stamped image using the zig markers. Die cut extra of the base and the penguins a few times from the white card and adhere all together. Adhere the element to the card front, arrange the flowers and leaves and adhere using the hot glue gun under the stamped image. 

To make the sentiment banner: The coffee and the saffron inks, 3D bling crystal stickers, the ‘Candy Cane Cottage’ stamp and die sets also the ‘Arrows and Banner’ die set are used. Once the banner is completed, give the banner with a pen or your fingers; adhere to the card front using clear drying glue or the hot glue gun. Add the dazzling details to the penguin’s hats and scarves, skates, details in the ice and the holly leaves.

This collection is soon cute! I love these happy fun penguins....and am so happy Heartfelt Creations brought out more sizes of the poinsettia flowers. One of my favourite flowers.

Till next post...happy scrapping and many inky moments 

Sussipoppins love 

To A Special Friend

Hi, a card using Crafters Companion Product.

CRAFTERS COMPANION PRODUCT USED:

Diesire ‘To A Special Friend’ DS-C-FRIEND (sentiment)

Sheena Douglas White Stamping Card SD-STCARD

Background Layering Stamps- Crocus collection CC-ST-CA-BKCR

Spectrum Noir Sparkle Pen-Clear

Harmony inks: Chinese red, Grasshopper.

Rock-A-Blocks

OTHER PRODUCTS USED:

Daimond stickles, Pink card stock, Glue gun, Double sided tape, 3D Double sided foam tape, Glue, White organza ribbon.

CARD INSTRUCTIONS:

Make a tent fold card base. 13.2cm across X 18cm high. Make the embossing layer from the pink card stock. Cut the red matting. Cut the stamped layer using the Sheena Douglas stamping card, using the background stamp and the Harmony inks in layers as shown on the cover of the stamp. Add color to the stamping by using the water pen to spread the ink. When dry add sparkle to the flowers and leaves using the clear sparkle pen.

Wrap the ribbon around the card and make a bow. Die cut the sentiment and apply stickles to the words. Trim the sentiment words so they can be adhered with the hot glue gun, above and below the bow.

MEASURMENTS FOR THE CARD:

1.     Card base size: 13.2cm x 18cm

2.     Card embossing size: 12cm x 16.9cm

3.     Card matting size: 9.5cm x 14.3cm

4.     Stamping card front: 10.4cm x 14.7cm

These are fun background stamps...making a quick card can be a breeze with these.

Till next post...inky hugs.

Sussipoppins

The new 'Candy Cane Cottage' collection...

...from Heartfelt Creations!

Heartfelt Creations Products And Products Carried On Their Website:

HCDP1-2105 Candy Cane Cottage papercollection

HCPC- 3884 Candy Cane Cottage cling stampset

HCD1-7253 Candy Cane Cottage die set

HCPC-3885 Merry Moments cling stamp set

HCD1-7254 Merry Moments die set

HCPC- 3886 Season Of Glee cling stamp set

HCD1-7255 Season Of Glee cling stamp set

HCD1-7252 Starry Night Decorative Die dieset

HCPC-3881 Candlelit Poinsettia cling stampset

HCD1-7249 Candlelit Poinsettia die set

HCFB1- 478 Christmas Poinsettia 3D ShapingMold

HCD1-7207 Hand stitched Accents die set

HCDA1-449 Stack and Store Daubers pack of 6

HCST1-401 Deluxe Flower Shaping Kit

DDOTS Double Dots-3d foam circles

159723 Designer Dries Clear Adhesive

173842 Score-Pal Measuring and ScoringBoard

359848 Spellbinders Tool N’ one

31510 Funnel tray

85-glitter Transparent Glitter

ANC814 Lettuce Entertain You Prills

478455 Zig Clean Color Real Brush Makers

RACP451 Archival Ink Coffee

RACP475 Ranger Archival Ink Library Green

RACP436 Ranger Archival Ink Leaf Green

RACP993 Ranger Archival Ink Red Geranium

RAHT-Heat It Craft Tool

Other Products Used:

SUP dazzling Details glitter glue, Sheens Douglas white stamping card, Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping Tool

TulipPuffy 3D Fabric Paint (snow)

Spectrum Noir Harmony Inks: Midnight, Bordeaux, Grasshopper

For more tips on creating with the Candy Cane Cottage Collection watch the tutorial at https://youtu.be/8Twf2bi7Lgk.

Instructions:

The finished size of this card is 6 ¼” X   8” (15.9cm x 20.3cm)

Taking the white card stock make a tent fold card base measuring 6 ¼”  X 8” (15.9cm x 20.3cm)

To make the card front: Find the design paper found in the paper collection with the candy stripe on the out side of the print. Trim the candy stripe away from all four sides. Place on the card front edges and cut the strips of stripes to fit the out side of the card base, mitring the corners as you go. Cut the remaining paper from the candy stripe to fit the card front. Adhere this to the card front, then the mitred candy stripe to the card front edges. Taking the Starry Night Decorative Die and the white stamping card, die cut the boarder four times. Trim the boarders to fit the card front at the inside of the candy stripes, adhere in place. Cut from the left over boarder a corner to tidy the joins if needed.

Make five poinsettias and 16 holly leaves for this card. To make the Poinsettia flowers and Holly leaves, stamp the Candlelit Poinsettia’s and Holly leaves in the Library Green ink onto the white stamping card. Bring the colour onto the image using the daubers and Archival inks, Red Geranium and Leaf Green. When finished colouring, die cut all then bring shape to the flowers and leaves by using the 3D flower mold. Use the flower shaping tools to bring further shape if needed.  Stack three layers together and adhere together by using the hot glue gun. Apply clear drying glue to the petal points with a brush then dip into the glitter. Put aside to dry on the funnel tray. When dry, tap the flower on the side of the tray to eliminate any excess glitter. Apply clear drying glue to the poinsettia flower centres then pour the prills onto the flower. Taking a shaping tool press lightly on the prills, this will push the prills into the glue. Put aside to dry on the tray, when dry they are ready to use on your card

Make the rest of the elements used for this card: Cut the cottage out a few times (about 4) extra also the window, door and rooftop so this will be 3D when adhered together. Make the candy canes, penguins and lights. Using the zig markers to apply colour to the elements.

To make the snow on the elements, the puff pint is used. Once the Stamp and die cut the elements with snow on them are stamped, die cut, coloured and adhered together, apply the puffy paint to the snow, while still wet apply glitter then use the heat tool to puff the snow. Do the same for the window, the roof top and the snow on the ground. Once all is done, adhere all in their places on the cottage.

Make the sentiment banner by using the stamp from the collection; coffee ink and the Hand Stitched Accents die set. Bring colour to the banner using the Leaf Green ink and a dauber.

Arrange the poinsettias, holly leaves and the small candy cane in clusters at each side of the banner. Add the holly leaves also to the side of the card behind the penguin on the left. Apply the dazzling details glitter glue to the hanging lights above the cottage door, the door handles and the hats and scarves of all three penguins to bring attention to them.

These cute little penguins are so adorable and fun...keep checking in as then you will get to see more of what they get up to over the next few weeks.

Till next time...happy inky days.

Sussipoppins hugs

OXO

"‘For My Friend"

Hello, what more can I say about this collection from Heartfelt Creations,

.....except enjoy the journey.....

  

Heartfelt Creations Products And Products Carried On Our Website:

HCDP1-2104 Candlelit Christmas paper collection

HCFB1- 478 Christmas Poinsettia 3D Shaping Mold

HCPC-3881 Christmas Poinsettia & Holly cling stamp set

HCD1-7249 Christmas Poinsettia & Holly die set

HCDC1-7252 Starry Night Decorative die set

HCD1-7212 Petite Pocket Accents die set

HCD1-7162 Eyelet Hearts die set

HCPC-3845 Just For You Sentiments cling stamp set

HCDA1-449 Stack and Store Daubers pack of 6

HCST1-401 Deluxe Flower Shaping Kit

ANC814 Lettuce Entertain You prills

DDOTS  Double Dots-3d foam circles

159723 Designer Dries Clear Adhesive

173842 Score-Pal Measuring and Scoring Board

359848 Spellbinders Tool N’ one

31510 Funnel tray

85-glitter Crystal Ultrafine Transparent Glitter

RACP475 Ranger Archival ink Library Green

RACP436 Ranger Archival ink Leaf Green

RACP499 Ranger  Archival ink Plum

RACP451 Ranger  Archival ink Coffee

Other Products Used:

Sheena Douglas white stamping card, SUP Dazzling Details, Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping Tool, Spectrum Noir Harmony Inks: Midnight Foam inking tool, Paper distressing tool. Saffron Ranger Archival ink

INSTRUCTIONS:

The finished size of this card is measuring 6.30” x 6.30” (16cm x 16cm). 

Taking the white card stock make a tent fold card measuring 6.30” x 6.30” (16cm x 16cm).  With the Midnight ink and foam inking tool bring color to the card base edges.

Finding the yellow paper from the Candlelit Christmas paper collection and cut this to

6.10” x 6.10” (15.5cm x15.5cm). Find also the Blue print from the same collection for the card front, cut this to 5.90” x 5.90” (15 cm x15cm). Taking the paper-distressing tool, distress all the paper edges. Adhere these to the card base.

Using the ‘Starry night Decorative Die’ die set and the white stamping card, make two dollies. From the white stamping card also make the sentiment boarder by using the die set ‘Petite Pocket Accents’ die set and the ‘Eyelet Hearts’ die set. Make the boarder strip about ¼” (2cm) deep. Apply the Midnight ink to the edges as seen in the photo. Taking the stamp for the sentiment from the ‘Just For You Sentiment’ stamp set and stamp with the coffee ink. Die cut the hearts using the Eyelet Hearts die set. Adhere all together with the hot glue gun and the 3D foam dots. The placement of the Starry Night Dollies, the rounded doily edge at the top of the card front matting paper. This will leave room for the sentiment band. Adhere the sentiment band to the centre of the card.

To make the Poinsettia flowers and Holly leaves: Stamp the Candlelit Poinsettia’s and Holly leaves in the Library Green ink onto the white stamping card. Bring the colour onto the image using the daubers and Archival inks. Saffron, Plum and leaf green listed in the product list. When finished colouring, die cut all then bring shape to the flowers and leaves by using the 3D flower mold. Use the flower shaping tools to bring further shape if needed.  Stack three layers together and adhere together by using the hot glue gun. Apply clear drying glue to the petal points with a brush then dip into the glitter. Put aside to dry on the funnel tray. When dry, tap the flower on the side of the tray to eliminate any excess glitter. Apply clear drying glue to the poinsettia flower centres then pour the prills onto the flower. Taking a shaping tool press lightly on the prills, this will push the prills into the glue. Put aside to dry on the tray, when dry they are ready to use on your card.

Adhere the flowers and leaves in the doily circle as seen in the card photo using the hot glue gun. Apply the Dazzling Details glitter glue to all the lacy edges including 

Next week is a new release....and it sure is fun!

Here is a sneaky peak...lol. With out giving it away. Its called Candy Cane Cottage.

What fun this is.

Sussipoppins inky hugs.

OXO