BEST WISHES COTTAGE GARDEN AND ONE OF THE SPECAIL BACKGROUND DIES LAUNCHED A WEEKS AGO....

BEST WISHES with this adorable background die...
have fun visiting.

Heartfelt Creations Products And Products Carried On Our Website:

HCD1-7282 Eyelet Royale die set

HCDP1-2110 Cottage Garden paper collection

HCFB1-489 3D Hydrangea Shaping Mold

HCPC- 3900 Cottage Garden Hydrangea cling stamp

HCD1-7278 Cottage Garden Hydrangea die set

HCPC-3901 Fresh Cut Hydrangea cling stamp

HCD1-7279 Fresh Cut Hydrangea cling stamp

HCD1-7203 Ornamental Tags die set

RACP475 Ranger Archival Library Green

RACP   5 Ranger Archival Venetian Rose

HCDA1-449 Stack And Store Daubers pack of 6

409311 Color In Water Brush-fine        

HCST1-401 Deluxe Flower Shaping Tool Kit

31510 Funnel Tray

159723 Designer Dries Clear Adhesive

DDOTS Double Sided 3D Foam Dots

RLHS100 Hydra Sponges

173842 Score-pal Measuring And Scoring Board

85-glitter Crystal Ultrafine Transparent Glitter

3D1844 Crystal Lacquer

NU822 Pacific Teal Nuvo Mousse

OTHER PRODUCTS:

 Nuvo Embellishment Mousse: Orange Blush, Persian Red, Powder Blue, Spring Green, Coral Calypso. Hot glue gun, Thin double sided 3D foam tape, Double sided tape, Sheena Douglas White  Stamping Card, Foam inking tool. Fine string.

INSTRUCTIONS:

This hinged tent fold card measures 6 ¼”x 6 ¼” (16cm 16cm) when completed. All the coloring is done with the mousse and water pen as water coloring.

Taking the white card make the card base to the above measurements. Find the background paper from the paper collection with the push bike and garden chair in it. Ink the edges of this paper with the Venetian Rose ink and inking tool. Taking the fancy die from the Eyelet Royale die set and the white card, die cut this twice. Bring color to both these die cuts with the Coral Calypso, when dry,  apply glue then the glitter. When this is dry adhere to the card front. To cover the gap between the die cuts adhere the birds on the branch, the flowers and leaves. Make the sentiment by cutting the tag out four times and adhere together. Color with the Aquamarine mousse, tie a bow with the string. Adhere to the card front under the flowers.

To make the flowers: Color the 11 larger petals with the Coral Calypso mousse, the 11 smaller petals with the Persian Red mousse. Bring shape to the petals by using the 3D Hydrangea mold and flower shaping tools. Adhere the petals together then adhere the micro beads to the petal centers. Make the birds by stamping and die cutting the birds on the branch three times. Apply color to all the birds and leaves. Cut one of these after the second bird and  cut a second die cut before the second bird. Join these together so you have three birds on the branch. Fussy cut the birds and the wings and adhere in layers with a thin 3D foam tape. Apply the crystal lacquer to the birds and set aside to dry. When dry adhere across the card front. Build the boarder out by adding leaves and flowers from the extra branches from the fussy cut birds.(add shape to the leaves by using the shaping tools) Adhere the flowers on top of the hydrangeas on the branch in clusters.

PHOTO

Wow! What a treat...these background dies sure makes a great game changer.

Inky hugs to all...till next time.

Heartfelt Creations has a special launch today...background dies....to die for....

Hi, this one is called 'Stairway Gardens"

 Heartfelt Creations Products And Products Carried On Our Website:

HCD1-7281 Stair Garden die set

HCD1-7282 Eyelet Royale die set

HCD1-7285 Courtyard Elegance die set

HCFB1-489 3D Hydrangea Shaping Mold

HCDI-7203 Ornamental Tags die set

HCFB1-489 Hydrangea 3d Shaping Mold

HCPC- 3900 Cottage Garden Hydrangea cling stamp

HCD1-7278 Cottage Garden Hydrangea die set

HCPC-3901 Fresh Cut Hydrangea cling stamp

HCD1-7279 Fresh Cut Hydrangea cling stamp

HCPC-3902 Cottage Window and Hydrangea cling stamp

HCD1-7280 Cottage Window and Hydrangea die set

31510 Funnel Tray

159723 Designer Dries Clear Adhesive

DDOTS Double Dots 3D Foam Circles

RACP500   Ranger Archival Ink Paradise Teal

RACP475 Ranger Archival Library Green

409311 Color In Water Brush - fine

173842 Score-Pal Measuring And Scoring Board

85-glitter Crystal Ultrafine Transparent Glitter

HCST1-401 Deluxe Flower Shaping Tool Kit

HCDA1-44 Stack And Store Daubers pack of 6

OTHER PRODUCTS:

Nuvo Embellishment Mousse: Aquamarine, Spring Green. Hot glue gun, Double sided tape, Double sided 3D foam tape, Sheena Douglas White  Stamping Card, Diamond stickles, Foam inking tool., Green micro beads.

INSTRUCTIONS:

His card measures 6 ¼”x 6 ¼” (16cm x 16cm) when completed. All the stamping is done using the Library Green ink.

Taking the white card, make a tent fold hinged card to the above measurements. With the spring green mousse and the water brush pen apply color to the card front edges. You need to color up to  about ½” in from the edge.

Taking the white card, the die sets stairway gardens and the eyelet royale make the card fronts. Take the outer square from the eyelet royale set and cut this twice. One square is inked on all edges with the paradise teal and the foam inking tool or a dauber.

Taking the remaining die cut square and the four stairway lace corner pieces from the stairway gardens die set. Place a die to all four corners of the square, tape then die cut. Taking a piece of white card and the squares from the stairway garden die set and die cut a lace square. Apply the paradise teal ink to the die cut pieces just made. Apply the diamond stickles or glitter to the die cut eyelets and dots to the lace squares, also the outer edge of the small square. Put aside to dry. Taking the plain  circle die from the courtyard elegance die set and a piece of white card, die cut the circle. Apply the paradise teal ink to the edges.

Adhere the plain square to the card front then the stairway lace front to this, adhering at the center of the square so the edges are lose and can naturally curl up. Adhere the circle to the card front with the 3D foam dots. Put the card aside to make the rest of the embellishments.

Take the white card for all the embellishment stamping and die cutting. The coloring is done with the nuvo mousse as water color using the colors spring green and aquamarine. Taking the sentiment from the ornamental tags die set, cut x1. Stamp and die cut x8 the small hydrangeas, x2 the straight hydrangea boarder, x12 the small petals, x12 the large petals, x1 the birds on the branch.(color only the leaves as the birds are not used)

Bring shape to the petals using the 3D hydrangea mold and the flower shaping tools. Use the shaping tools to bring shape also to the leaves and small Hydrangeas.

Arrange and adhere with the  hot glue gun the small hydrangeas in a circle to the  circle on the card front. Place the small lace square to the center of this arrangement as a diamond. Where the diamond square edges touch the leaves, this is where you adhere with the hot glue gun.. Adhere the sentiment across the diamond, from point to point. Taking the straight hydrangea boarders, cut these in half, trim further as needed to place and adhere at the diamond points between the stairway die cut  pattern so they overlap the edges a little. At these points adhere the double petaled flowers which have micro beads adhered in the  in the centers.

' Tweet Thoughts'

Hi, today I have a cute card for you, "I'm thinkung of you"

Have fun....

HEARTFELT CREATIONS PRODUCTS AND PRODUCT ON THEIR WEBSITE:

HCDP1-2110 Cottage Garden paper collection

HCFB1-489 3D Hydrangea Shaping Mold

HCPC- 3900 Cottage Garden Hydrangea cling stamp

HCD1-7278 Cottage Garden Hydrangea die set

HCPC-3901 Fresh Cut Hydrangea cling stamp

HCD1-7279 Fresh Cut Hydrangea cling stamp

HCPC-3902 Cottage Window and Hydrangea cling stamp

HCD1-7280 Cottage Window and Hydrangea die set

HCPC-3844 For My Friend Sentiments cling stamp set

HCD1-7271 Rounded Window Frame die set

159723 Designer Dries Clear Adhesive

DDOTS Double Dots100pc 3D Foam Circles

RACP500 Ranger Archival Ink Sepia

RACP475 Ranger Archival Library Green

409311 Color In Water Brush - fine

173842 Score-Pal Measuring And Scoring Board

85-glitter Crystal Ultrafine Transparent Glitter

HCST1-401 Deluxe Flower Shaping Tool Kit

HCDA1-449 Stack And Store Daubers pack of 6

3D1844 Crystal Lacquer

NU802 Indian Gold Nuvo Mousse

NU822 Pacific Teal Nuvo Mousse

OTHER PRODUCTS:

Nuvo Embellishment Mousse: Burnished Bronze, Coral Calypso, Old Navy, Aquamarine, Orange Blush, Persian Red, Powder Blue, Spring Green. Spectrum Noir Harmony Inks: Sand Storm, Hot glue gun, Double sided tape, Double sided 3D foam tape, Sheena Douglas White  Stamping Card, Diamond stickles, Foam inking too, Blue organza ribbon,

INSTRUCTIONS:

This card measures 8 ¼”x 6 1/3 (21cm x 17cm) when completed.

Make a hinged tent fold  card to the above measurements. From the paper collection find the background paper with the blue and yellow hydrangeas in it, cut this a little smaller than the card base. Ink the edges of the card base and the printed paper with the sandstorm ink and inking tool. Adhere the printed paper to the card front. Die cut the fancy outer circle from the Round Window Frame die set, using the outside die and the white card. Ink the edges of this also with the sandstorm ink. Taking the fancy lace die and the printed paper cut a circle. Apply glue to the out side of the circle and dip this into the glitter. Put aside to dry. When dry, adhere both circles to the card base using a thin 3D foam tape.

Prepare all the embellishments: Taking the white card, the stamps, dies and the Nuvo mouss. ( the mousse will be used as a water colo). Stamp and die cut; x1 window and shutters, x1 bird on the branch boarder, x1 curved hydrangea boarder, x3 straight hydrangea boarder. Bring color to the embellishments and using the balling tools bring shape to the leaves, flowers and birds. Using the 3D foam dots adhere the window and shutters to the circle. The curved boarder, adhere above the window following the curve. Adhere the straight boarders under the window, about ¼” below. Adhere  two boarders first next to each other, the remaining  boarder adhere on top in the center. Place the birds on the branch at the foot of the window so you will not see a gap.

Make the sentiment by stamping I’m Thinking Of You on to the white card with the sepia ink, cut this to a banner. Apply glue to the edges then dip this into the glitter and set aside to dry. Make a triple bow from the organza ribbon. Adhere both the ribbon and the banner to the card front under the boarders.

To finish the card, apply the diamond stickles to the leaves and swirls. Apply the crystal lacquer to the birds.

Garden of Dreams

"Youre One In A Million"

A card made using the new release....called 'Cottage Garden'....wjhat is this going to be a dreamy month.

Heartfelt Creations Products and Products Carried On Our Website:

HCDP1-2110 Cottage Garden paper collection (x2)

HCFB1-489 3D Hydrangea Shaping Mold

HCPC- 3900 Cottage Garden Hydrangea cling stamp

HCD1-7278 Cottage Garden Hydrangea die set

HCPC-3901 Fresh Cut Hydrangea cling stamp

HCD1-7279 Fresh Cut Hydrangea cling stamp

HCPC-3902 Cottage Window and Hydrangea cling stamp

HCD1-7280 Cottage Window and Hydrangea die set

HCD1-7272 Circle Sunlight Window die set

HCD1-7155 Circle Basics Large

HCCB1-480 6”x 6” Shutter Fold Card-white

ANC814 Prills-Lettuce Entertain You

31510 Funnel Tray

159723 Designer Dries Clear Adhesive

DDOTS Double Dots 3D foam circles

RACP500 Ranger Archival Ink Sepia

RACP475 Ranger Archival Library Green

409311 Color In Water Brush - fine

173842 Score-Pal Measuring And Scoring Board

85-Glitter Crystal Ultrafine Transparent Glitter

HCST1-401 Deluxe Flower Shaping Tool Kit Balling

HCDA1-449 Stack And Store Daubers pack of 6

NU822 Pacific Teal Nuvo Mousse

OTHER PRODUCTS USED:

 Spectruim Noir Harmony Inks: Ocean blue, Grass hopper. Nuvo Mousse: Sea spray green, Spring green, Powder blue, Persian red, Orange blush, Other:  Inking foam tool,

Double sided tape, Double sided 3D foam tape, White card stock, Hot glue gun, Diamond stickles.

INSTRUCTIONS:

This card measures 6 ¼” X 6 ¼ “/ 16.5cm x 16.5cm. Taking the shutter card base and the Cottage Garden paper collection. Ink the edges of the card base that will be covered with the printed paper. Find the paper with 4 printed scenes. You will need 4 prints with the blue hydrangea’s in the opposite corners. (you will need two paper pads to get four) All the papers for the card base will be inked on the edges with the Grasshopper green ink when cut to size. Taking one of these prints and trim this to a little smaller than the card base. Adhere this square to the inside of the card base. Taking the three remaining paper prints, trace the ½ circle from the shutter card base with a pencil on the back side of the prints. Fussy cut the ½ circles a little smaller than the ½ circle so as the square. Adhere the ½ circles to the inside of the card base ½ circles. Also adhere to the second outer ½ circle on the outside as you will see this when the card is standing open.

Make all the embellishments for the card as so: Stamp and die cut  using the white stamping card and the listed stamp and die sets. x3 large hydrangea’s, 1x med hydrangea, x6 curved boarder, x1 bird on the branch boarder, x21 large hydrangea petals, x40 small hydrangea petals and die cut a circle using the larges size from the circle basics die set.

Color all the hydrangea’s using the Nuvo mousse- powder blue as water color and the Spectrum Noir- ocean blue ink for the petal edges. The leaves, use the Nuvo mousse-spring green as water color. For the birds use Nuvo mousse- Sea spray, pacific teal, sea spray green, Persian red, orange blush as water color.

To decorate the card: First take the sentiment stamp and the sepia ink, stamp the sentiment to the inside square of the card to the center right. Stamp about ¾  of the sentiment to the prepared circle. Aline the circle so the sentiments match and adhere with a thin 3D tape to the card base. Taking the prepared large hydrangea, adhere this to the circle. When the petals have been shaped with the 3D shaping mold and have the prills in the petal centers, adhere a double hydrangea petal next to the million word in the sentiment. Adhere the birds on the branch boarder to the card above the circle once the birds and leaves have been shaped with the balling tools.

Taking the prepared curved boarder and adhere to the ½ circles in the card base at the curved edge. For the two ½ circles on the front of the card, adhere two boarders to each ½ circle.

Make the hydrangea petals by using the 3D hydrangea mold. Using the tray apply glue to the petal centers and sprinkle the prills over the petals, put aside to dry. When dry adhere with the hot glue gun to the two large hydrangea’s and the medium hydrangea. Arrange the hydrangeas on the front ½ circles, trim away excess leaves  and adhere using the hot glue gun.To finish the card apply the diamond stickles to the petal edges, the swirls, the birds wings, tail  and head.

The collection is adorable. There is so much one can do with this.

Have fun and till next week with another card.

Inky hugs.

Setting the right foot forward in this new year......

....with a card....."YOU ARE SO THOUGHTFUL"

Heartfelt Creations Products And Products Carried On Their Website:

Calla Lilly paper collection HCDP1-2110

Calla Lilly 3D shaping mold HCFB1- 484

Calla Lilly cling stamp set HCPC-3897

Calla Lilly die set HCD1-7275

Swan Lake cling stamp set HCPC-3899

Swan Lake die set HCD1-7277

Rounded Window Frames HCD1-7271

Pastel Pollen Stamens Medium HCS1-485

Just For You sentiments (You Are So Thoughtful) HCPC-3845

Stack and Store Daubers pack of 6 HCDA1-449

Deluxe Flower Shaping Kit HCST1-401

Luxe Gold Card Stock HCGP1-488

Stack and Store Daubers pack of 6 HCDA1-449

3D Crystal Lacquer 3D1844

RAHT Heat It Craft tool

359760 Gold embossing powder

DDOTS Double Dots-3d foam circles

159723 Designer Dries Clear Adhesive

173842 Score-Pal Measuring and Scoring Board

359848 Spellbinders Tool N’ one

31510 Funnel tray

85-glitter Crystal Ultrafine Transparent Glitter

RACP475 Library Green Archival Ink

Other Products Used:

Spectrum Noir Harmony inks: Orange, Pine tree, Grasshopper, Pale Fig, Crushed Velvet,. Foam Inking tool, Diamond stickles, Hot glue Gun, Fussy cutting Scissors, Double sided Tape, 3D Double Sided Foam Tape, Misti Stamping Tool, Versa-Mark, White organza ribbon. Sheena Douglas White Stamping Card.

INSTRUCTIONS:

The finished size of this card is 6” x 6” / 15cm x 15cm

Taking the white card stock make a tent fold card measuring 6 ¼ ” x 6 ¼ ” / 16cm x 16cm. Taking the paper collection find the paper with the 4, 6” x 6” prints in the one sheet. Trim this into 4 pieces. Choose the print with the Calla Lilly boarder that goes all around the square. Ink both the card front and the paper with the Pale Fig ink and the inking tool or daubers. Adhere this paper to the card front.

Using the rounded window frames die set and the gold card stock, die cut the two larger frames from gold. From the same die set, cut the smallest and the middle die using the white card stock. Use the Pale fig and the Crushed Velvet to bring color to the white card stock die cut fancy circles. The smallest fancy circle, apply clear drying glue to the outer edge the dip into the glitter set aside to dry. Adhere the larger fancy circle to the card front with foam tape or dots. Adhere the two middle sized fancy circles together with double sided tape so the gold is on top and the Pale Fig shows through the gold. Adhere this also to the card front with the foam dots or tape. Adhere the smallest fancy circle to the card front also with the foam dots or tape, taking into account where the flowers will later be adhered so you wont see the foam dots.

Prepare the swan and the ducklings then adhere to the fancy circle with 3D tape or dots.

Arrange the Calla Lilly sprays around the swan. Fussy cut the extra ducklings out and adhere in place using the hot glue gun. Add one of the ducklings into the raised feathers of the swan.

Making the Calla Lilly’s and sentiment, first the sentiment is stamped with gold embossing powder then the card is trimmed to 1 ½” x 5 ¼” /2cm x 13cm. Fussy cut the banner ends then ink the edges with the Pale Fig ink. Curl the ends and center with your fingers to give it a rounded shape. Adhere to the foot of the swan so the duckling heads will be coming from under the banner.

To make the Calla Lilly’s: The cream and yellow colored stamens are used for each Calla lily. Bring color to the leaves and the Calla lily’s using the Harmony inks and the inking tool. When this is done bring shape to them by using the 3D Calla Lilly mold that comes with the collection, using the shaping tools when needed. Adhere the stamen to the lily center using the hot glue gun and then folding both the lily edges over to the front to cover the beginning of the stamen. When the hot glue is dry and cold, trim the wire away ready for use in this card. Arrange the leaves a lot the foot of the card as a base for the flowers. Arrange the Calla Lilly’s, three on the right and one on the left. Add a triple double bow made with the organza ribbon.

To finish the card, apply Straw Bale ink to the ducklings then the crystal lacquer. Diamond stickles to all the beaks, the Calla Lilly sprays and dots to the small fancy frame.

Don't you just love these adorable baby swans. A beautiful collection to finish the last years collections.

The comming year Heartfelt CReations have more fun crafty goodies coming our way....can't wait to share it all with you.

Hugs, till the new years new collection...lol...next Wednesday...lol

Inky hugs,Sussi