Inspiration Wednesday is show casing a harmonica mini folder

featuring the side release from Heartfelt Creations,

and what do you think about these little mini flowers....adorable!

You can get a printout of all the instructions and the product list HERE

Or you can scroll down to get the info at the bottom of the posting.

Inky hugs and have a scrappy happy crafting week.

 

Heartfelt Creations Productsused for this project and Products sold on their website:

HCDP1-2735 Floral Frames paper collection

HCD2-7399 Flourish Companion Frame die

HCD2-7400 Classic Companion Boarder die

HCD2-7401 Classic Butterfly Companion die

HCD2-7402 Filigree Companion Frame die

HCPC-3975 Rectangular Floral Frame cling

HCD1-7386 Rectangular Floral Frame die

HCPC-3976 Oval Floral Frame cling

HCD1-7387 Oval Floral Frame die

HCPC-3976 Curvy Floral Frame cling

HCD1-7387 Curvy Floral Frame cling

HCS1-457-2   Pastel Pearl-medium Stamens

HCS1-457-3  Pastel Bead-medium Stamens

HCDA1-449 Daubers Pack of 6

HCPP1-475 Deluxe Flower Shaping Paper pack of 50

HCST1-401 Deluxe Flower Shaping Kit

159723 Designer Dries Clear Adhesive, 352954 Metal Tips For Adhesive, 359848 Spellbinders tool ‘N’ one, 409311 Color In Water Brush-fine, AM7454 Quickstick Craft Tool, RLH5100 Hydra Sponge, 173842 Scor-pal, RACP500 Ranger Archival Sepia Ink

 

OTHER PRODUCTS USED:

Spectrum  Noir Harmony inks: Topaz Green, Pink Tulip, Chinese Red, Lemon Tonic.

Other: Double side tape, Hot glue gun, Fussy cutting scissors, Misti stamping tool, Paper trimmer, grey board, Pale gold organza ribbon, Gesso, Water spritzer, Cloth (old T-shirt)

 

INSTRUCTIONS: This mini accordion book measures 5  1/4“ x 7  1/4“

To make the mini book base: Taking the grey board, cut this twice at  5  1/4“ x 7  1/4“. Taking the white card stock, cut this four times at  5  1/4“ x 7  1/4“.  Adhere in a sandwich using the double sided tape and clear drying adhesive, the white card stock, the grey board then the white card stock again. Do this twice so you have a front and a back cover. For the accordion pages: using the white card stock cut the five pages  6  3/4“ x 5  1/2“ and one at 6  3/4“ x 4  3/4 “ Make a fold along the 5  1/2“ length at 4  3 / 4 “. Adhere the pages together using double sided tape and clear drying adhesive to make an accordion, the last page does not have the fold. Adhere to the front and back covers. Adhere the ribbon to the back of the book with the double sided tape.

Find the design paper sheet 11 b as this will be used for all the pages of the book. For the front and back cover die cut a shape using the outer die from the Flourish Companion Frame die set. Cut two, one for the front and the other for the back. Die cut also the smaller outer frame in the same set, once. From the white card stock die cut the fancy thin frame using the inner die from both sizes, the lager and the smaller. Cut also an extra smaller sized outer frame.

Adhere the lager outer frames to the front and back of the book cover. Adhere the white card stock thin frame to the front cover. Adhere the design paper small frame to the white card stock frame then adhere the thin inner frame to this. Use double sided foam dots to this, apply a little clear drying glue to the foam dots then adhere to the front cover. Apply randomly a little Chinses red ink to the white thin frames.

Each of the book pages has a matting from the design paper sheet 11 b cut at 4  1/4“ x 6  1/4“ . Adhere this with the double sided tape. The book is ready to decorate. All is die cut with the white card stock and coloured with the harmony water inks and the water spritzer. All is adhered to the book using the clear drying adhesive unless stated.

Page 1- Using the Classic Butterfly Companion die, die cut the image. Using the fussy cutting scissors, cut away the card stock below and above the butterfly. Use the Tonic Yellow and the Topaz Green inks a seen in the project photo. Adhere in place, leaving the fold out butterfly free.

Page 2- Using the Classic Companion Boarder die, die cut the image. Apply adhesive to the three straight edges to form a pocket, adhere to the edge of each page where the matting begins.

Page 3- Using the Classic Butterfly Companion die, die cut the image. Bring colour to the die cut using the Chinese Red, Topaz Green and the Lemon Tonic water inks. Use the water spritz to blend the inks. Adhere in place, leaving the fold out butterfly free.

Page 4- Using the Filigree Companion Frame die, die cut the outer frame once and the thin matching frame twice. Cut also two corner pieces. Cut in half the outer frame and colour the edges with the Lemon Tonic ink, using the sepia ink and the Rectangular Floral Frame stamp, stamp without a stamping block or stamping tool at the straight edge. ( this is so the stamping will not be clear and softer at the edges. Use a cloth to wipe away excess ink. Do the same on both sides. Adhere the thin frame to this and cut to fit.

Colour one of the thin frames with the Topaz ink, Adhere to the page by using the Lemon Tonic. Color the die cut corners with the Topaz Green and the Lemon Tonic inks, adhere to the book at the fold line but leaving the fold parts free for the cards to slip into.

Page 5. Using the  Classic Companion Boarder die, die cut this with out using the insert part of the die. Make a fold along the long straight edge of the card stock about 1 1/2" Ink all the edges with the Lemon Tonic ink and spray with the water spritzer. Adhere at the book fold using double sided tape and adhesive. Using the sepia ink and the stamp from the Curvy Floral Frame cling set ( use only the part that has two flowers. ) Stamp three images on the page flaps. Make the 3 D flowers by stamping onto a sheet of white card stock, colouring with Pink Tulip and  Lemon Tonic inks, die cutting and shaping. ( these flowers can be made at the same time as the flowers are made for the front cover. ) Adhere to the page using the hot glue gun.

The card inserts are cut from the white card stock stamped with the sepia ink with out a stamping block or stamping tool so the image will be softer and random. Wipe excess unwanted ink away from the stamp by using a cloth before applying the inked stamp to the card. Each card is stamped differently and using parts of all the Floral Frame stamps. Apply different inks to the images using the daubers and water spritzing to blend the colours. Adding extra water spritz to get the ink to run. Leave to dry naturally and when still a little damp, put some weight on them with a few books to enable them to dry flat.

To make the flowers: Make the flowers by taking the white card stock and sepia ink to stamp the flower petals from the collection stamp sets.

From the Rectangular Floral Frame set, the stamen stamp is used ( x4, coloured with Chinese Red inks ) The corn flower shape ( x21, coloured with the Chinese Red and the Tropical Green inks ) The large flower ( x8, coloured with the Pink Tulip and the Lemon Tonic inks) the leaves ( x5 and coloured with the Tonic Green ink )

From the Curvy Floral Frame set, the flowers (  x4 Large size coloured with the Chinese Red ink and x4 Large size coloured with the Lemon Tonic and Chinese Red inks ) .The leaves ( x5, coloured with the Topaz ink )

The stamens used for the flower centers are pastel yellow / orange and the pale yellow Pastel Bead. The stamens are adhered with the hot glue gun once the flowers are shaped with the shaping tools. When all the flowers and leaves are made, arrange and adhere in place on the front cover and to page 5 if not already done.

Add gesso to the flowers and book pages by adding it with you finger tip so you can blend the gesso as you go. Add a little at a time, when the gesso is dry add more if you want it to be more muted. Remember, less is more, for this time.

Tip:

1. It is easier to clean any gesso accidents as soon as you can as when it is dry it is much harder to clean up.

2. If extra flowers and leaves are made they will always be used. To have to start all over again to make flowers because there is one or two that are needed is not much fun. If there are left overs, they can always be used in other projects.

 

 

 

 

Inspiration with Frames and adorable flowers

It is amazing what these little flowers do to the frames. Continue for the recipe.

Heartfelt Creations Products and Products sold on their website:

HCDP1-2735 Floral Frames paper collection

HCPC-3975 Rectangular Floral Frame cling

HCD1-7386 Rectangular Floral Frame die

HCPC-3976 Oval Floral Frame cling

HCD1-7387 Oval Floral Frame die

HCPC-3976 Curvy Floral Frame cling

HCD1-7387 Curvy Floral Frame cling

HCS1-457-2 Pastel Pearl-medium Stamens  

HCDA1-449 Daubers pack of 6

HCPP1-475 Deluxe Flower Shaping Paper pack of 50

HCST1-401 Deluxe Flower Shaping Kit

159723 Designer Dries Clear Adhesive, 352954 Metal Tips For Adhesive, 359848 Spellbinders tool ‘N’ one, 409311 Color In Water Brush-fine, 85Glitter Glitter Ultrafine , Heat it Tool, Am7454 Quickstick Craft Tool, 173842 Scor-pal, RACP500 Ranger Archival Sepia Ink, DDOTS 3D foam dots

OTHER PRODUCTS USED: Spectrum  Noir Harmony inks: Topaz Green, Pink Tulip, Chinese Red, Lemon Tonic. Other: Double side tape, Hot glue gun, Fussy cutting scissors, Misti stamping tool, Paper trimmer

 INSTRUCTIONS:

This slimline card measures 4 “ x 8  1 / 2 “ when completed

Taking the white card stock and make a tent fold card to the above measurements. Find the design paper sheet 5 a and cut a matting to measure a little smaller than the card front. Adhere this to the card front.

To make the frame: Taking the Rectangular Floral Frame cling stamp, white card stock and the sepia ink, stamp the frame twice. Die cut the frames with the matching die. Die cut eight extra frames from the white card stock. Trim away both the stamped frame image at the end with the flower in it. Do the same with the card stock die cut frames. Adhere these all together making two frames that will be adhered together at the join to fit on the slimline card front once they are coloured with the Topaz Green and the Chinese Red inks. Adhere in place.

For the frame piece that is above and below the sentiment: This is the cut away piece from the two frames already made. Do the same as you did for the frame, colouring, stacking and adhere in place on the card front using the hot glue gun, adhesive  and the 3 d foam dots

Make the sentiment by stamping the sentiment onto white card stock and colouring with the Topaz Green ink. The sentiment is found in the Oval Floral Frame sets. Die cut the stamped sentiment using the matching die and die cut from the white card stock four extra die cuts. Stack these and adhere together then adhere in place on the card.

For the flowers: The Rectangular Floral Frame  set and the Curvy Floral Frame sets are used. From the Rectangular Floral Frame  set make x 8 leaves, x 8 corn flower flowers, x 4 stamens . Colour with Lemon Tonic, Topaz Green and the Chinese Red inks. From the Curvy Floral Frame set make x 4 leaves and x 6 large flower petals. Colour with the Lemon Tonic, Tulip Pink and Topaz Green. Bring shape to the flowers by using the  Deluxe Flower Shaping Kit. Use the Pastel Pearl-medium Stamens for the flower centres. The large flower centres  have 3 stamens to each flower. The rest of the flowers have 1 stamen for the centre. Adhere together using the hot glue gun. Adhere in place on the frame using the hot glue gun. See the project photo for the placements.

To finish the card, apply the glitter to the leaves and sentiment by using the clear drying adhesive with the fine metal tip on the bottle, once the  adhesive is applied then you can sprinkling the glitter. When the glitter is dry tap away the excess

 

 

Inspiration Wednesday brings you frames

 ..to frame your most fav. photo

Visit: HERE for a print out of the instructions of this card.

Heartfelt Creations Products and Products sold on their website:

 HCDP1-2735 Floral Frames paper collection

HCPC-3975 Rectangular Floral Frame cling

HCD1-7386 Rectangular Floral Frame die

HCPC-3976 Oval Floral Frame cling

HCD1-7387 Oval Floral Frame die

HCPC-3976 Curvy Floral Frame cling

HCD1-7387 Curvy Floral Frame cling

HCS1-457-2 Pastel Pearl-medium Stamens

HCS1-457-3 Pastel Bead-medium Stamens 

HCDA1-449 Daubers Pack of 6

HCPP1-475 Deluxe Flower Shaping Paper pack of 50

HCST1-401 Deluxe Flower Shaping Kit

159723 Designer Dries Clear Adhesive

352954 Metal Tips For Adhesive Bottle

359848 Spellbinders tool ‘N’ one

409311 Color In Water Brush-fine

85Glitter Glitter Ultrafine

AM7454Quickstick Craft Tool

173842 Scor-pal

RACP500 Ranger Archival Sepia Ink

OTHER PRODUCTS USED:

Spectrum  Noir Harmony inks: Topaz Green, Chinese Red, Lemon Tonic. Other: Double side tape, Hot glue gun, Fussy cutting scissors, Misti stamping tool, Paper trimmer

 INSTRUCTIONS:

This tent fold card measures 6 “ X 6 “ when completed.

Make a tent fold card that measures 6 “ X 6 “ from the white card stock. Using the sheet 6 a With the paper trimmer cut two matting a little smaller than each other and smaller than the card base. The smallest matting will have the printed house in the frame on it. Adhere these to the card base front.    

Taking the sepia ink, misti stamping tool, white card stock and the Curvy Frame stamp from the collection. Stamp the complete image once and the flower corners once. Die cut the image’s with the matching die and also die cut the same frame image from the white card stock an extra four times.

Colour the stamped image using the daubers and the water pen with Topaz Green and Red Chinese inks as seen in the project photo. Adhere the frame layers together. Adhere the fussy cut flower corners from the frame to the frame print on the card front, so the cluster print will be extended out from the frame flower cluster. These are placed so they will show from under the 3d flower clusters when adhered in place. Now the layered frame can be adhered to the card front, onto the printed image.

Make the flowers by taking the white card stock and sepia ink to stamp the flower petals from the collection stamp sets :  Rectangular Floral Frame and the Curvy Floral Frame.

From the Rectangular Floral Frame set, the stamen stamp is used ( x 11, coloured with the Tonic lemon and Chinese Red inks ) The corn flower shape is stamped ( x 7, coloured with the Chinese Red ink ) From the Curvy Floral Frame set, the flowers (  x 7 Large size coloured with the Chinese Red ink and x 5 Large size coloured with the Lemon Tonic inks ) .The leaves ( x 10, coloured with the Topaz ink )

The pastel yellow / orange and the pale yellow Pastel Bead stamens are used for the flower centres. They are adhered with the hot glue gun once the flowers are shaped with the shaping tools. Use the images on the already adhered frame as a guide as to the placement of the flowers and leaves.

Make the sentiment by stamping onto the white card stock with the sepia ink, ‘For My Friend’ from the Oval Floral set. Bring colour to the sentiment by using a dauber and the Topaz Green. Using the matching die, die cut this plus four extra die cuts. Adhere together then adhere to the right side of  the frame on the card front. Adhere three corn flowers to under the sentiment.

To apply the glitter, using the clear drying adhesive with the fine metal tip on the bottle, apply the adhesive along the frame, the swirls and the sentiment then sprinkling glitter. When the glitter is dry tap away the excess.

 

Hi again..today's Wednesday brings you a lot of crafting fun....

 ...from HEARTFELT CREATIONS. The FLORAL FRAMES collection....

Lets have some crafting fun!

Heartfelt Creations Products and Products sold on their website:

HCDP1-2735 Floral Frames paper collection, HCPC-3975 Rectangular Floral Frame cling, HCD1-7386 Rectangular Floral Frame die, HCPC-3976 Oval Floral Frame cling, HCD1-7387 Oval Floral Frame die, HCPC-3976 Curvy Floral Frame cling, HCD1-7387 Curvy Floral Frame cling, HCS1-457-2 Pastel Pearl-medium Stamens, HCDA1-449 Daubers Pack of 6, HCPP1-475 Deluxe Flower Shaping Paper pack of 50, HCST1-401 Deluxe Flower Shaping Kit

159723 Designer Dries Clear Adhesive, 352954 Metal Tips For Adhesive, 359848 Spellbinders tool ‘N’ one, 409311 Color In Water Brush-fi, 85Glitter Glitter Ultrafine Heat it Tool, AM7454 Quickstik, 173842 Scor-pal, RACP500 Ranger Archival Sepia Ink

OTHER PRODUCTS USED: Inks: Spectrum Noir Harmony - Topaz Green, Pink Tulip. Other: Misti stamping tool, Fussy cutting scissors, Ruler, Hot glue gun, Double sided tape.

INSTRUCTIONS

This card measure 6 “ x 6 “ when completed.

Make a tent fold card measuring 6 “ x 6 “. Taking the sheet number 6 a  from the Floral Frames paper pad collection. Trim this a little smaller than the card front and adhere in place using the double sided tape or clear drying adhesive.

Taking the stamp and matching die for the frame from the Rectangular Floral Frame set. Using the sepia ink, stamp the frame three times. Taking the matching dies, die cut the stamped frames and die cut eight extra from the white card stock.

To make the main frame: Taking one of the stamped frames and cut diagonally at the flower end of the frame on both sides ( it is cut  diagonally so you won’t see the join so much later ). Put the flower image of the frame aside for another project. Taking a second frame do the same but at the other end. Making sure the cuts will be able to fit together when joined later. The frame on the card measures just over the 5 “ in length. It can be made longer if wanted. Using the eight die cut frames, cut these to fit the two stamped cut frames, you should have four layers for each. Adhere the stacks together then adhere the stacked frames to the center of the card front, butting the joins together so the joins in the frame are not seen too much.

To make the frame sides: Trim the remaining two stamped frame images to  1  1 / 4 “ from the frame end with the flower image on it so to fits the card front when both sides are adhered next to the main card frame. Adhere to the card front sides as seen in the project photo.

Taking the Oval Floral Frame cling stamp, matching die, white card stock, the sepia ink then stamp the image twice ( you will only be needing the smaller flower cluster from the stamping. Color with the Topaz Green and Pink Tulip inks. Die cut this then trim away any unwanted image so you have only the smaller flower cluster. If you have stamped the whole image, set the unwanted part aside for another project. Adhere the two images to both the bottom and top of the inside of the frame so it will show when the 3 d flowers are adhered in place.

For the sentiment: Using the sepia ink, the white card stock and the matching sentiment stamp and die from the Oval Floral Frame set. Stamp once and die cut, die cut four extra shapes from the card stock. Stack and adhere together. Using the Topaz Green to bring colour to the sentiment. Adhere this into the centre of the frame.

To make the flowers: The flowers used from the Rectangular Floral Frame sets are the corn flower shape x 10, the leaves x19 and coloured with the Topaz Green ink. The flowers using the Curvy Floral Frame sets, x7 both sizes and the small size only x 5. These are coloured with the Pink Tulip ink. Bring shape to the flowers and leaves by using the deluxe flower shaping kit. The pale yellow / orange pearl stamens are used for the flower centers. The hot glue gun is also used to adhere together and in place. Cluster and adhere in place as seen in the project photo.

To finish the card, using the Designer Dries Clear Adhesive with the metal tip on it, apply this to the pink flower tips and sentiment. Sprinkle the glitter over the adhesive and put aside for the adhesive to dry. When dry tap away any excess glitter.

I hope you had fun visiting today...till next time, have a happy scrappy day.

Inky hugs...

Inspiration Wednesday is here again with this new release

 

 

from HEARTFELT CREATIONS....The FLORAL FRAMES collection.

Enjoy

This tent fold card measures 6 “ X 6 “ when completed.

Make a tent fold card that measures 6 “ X 6 “ from the white card stock. Using the sheet 5 a With the paper trimmer cut a matting that measures 5  3 / 4 “ x 5  3 / 4 “and a matting and a second measuring 5  1 / 4 “ x 5  1 / 4 “  this matting will have the house and frame printed on it. Adhere these to the card base front.

Taking the sepia ink, misti stamping tool, white card stock and the Oval Frame stamp from the collection. Stamp the image once. Die cut this image with the matching die and also die cut the same image from the white card stock an extra four times.

Color the stamped image using the daubers and the water pen with Topaz Green and Pink Tulip inks as seen in the card photo. Adhere the layers together then this can be adhered to the card front.

Make the flowers by taking the white card stock and sepia ink to stamp the flower petals from the collection stamp sets :  Rectangular Floral Frame and the Curvy Floral Frame. From the Rectangular Floral Frame set, the stamen stamp is used ( x 6, coloured with the Tonic lemon ink ) and from the Curvy Floral Frame set, the flowers (  x 7 both sizes , coloured with the Pink Tulip ink )  and leaves ( x 11, coloured with the Topaz ink ) are used. The pastel yellow / orange stamens are used for the flowers and are adhered with the hot glue gun once the flowers are shaped with the shaping tools. Use the images on the already adhered frame as a guide as to the placement of the flowers and leaves.

Make the sentiment by stamping onto the white card stock with the sepia ink, ‘For My Friend’ from the Oval Floral set. Bring color to the sentiment by using the daubers and the Topaz Green and the Tulip Pink inks. Using the matching die, die cut this plus four extra die cuts. Adhere together then adhere to the lower right corner of the frame on the card front.

To apply the glitter, using the clear drying adhesive with the fine metal tip on the bottle, apply the adhesive along the frame, the swirls and the sentiment then sprinkling glitter. When the glitter is dry tap away the excess.

HeartfeltCreations Products and Products sold on their website:

HCDP1-2735 Floral Frames paper collection, HCPC-3975 Rectangular Floral Frame cling, HCD1-7386 Rectangular Floral Frame die, HCPC-3976 Oval Floral Frame cling, HCD1-7387 Oval Floral Frame die, HCPC-3976 Curvy Floral Frame cling, HCD1-7387 Curvy Floral Frame cling, HCS1-457-2  Pastel Pearl-medium Stamens, HCDA1-449 Daubers Pack of 6, HCPP1-475 Deluxe Flower Shaping Paper pack of 50, HCST1-401 Deluxe Flower Shaping Kit, 159723 Designer Dries Clear Adhesive, 352954 Metal Tips For Adhesive Bottle, 359848 Spellbinders tool ‘N’ one, 173842 Scor-pal, RACP500 Ranger Archival Sepia Ink, 409311 Color In Water Brush-fine, 85Glitter Glitter Ultrafine, AM7454 Quickstick Craft Tool

 OTHER PRODUCTS USED: Spectrum  Noir Harmony inks: Topaz Green, Pink Tulip, Chinese Red, Lemon Tonic. Other: Double side tape, Hot glue gun, Fussy cutting scissors, Misti stamping tool, Paper trimmer.

Till next time. have a scrappy time.

OXO

Celebrating each day...but today it is a extra treat...

 ...with the Fancy Classic oval frames and the Vining Clematis banners from Heartfelt Creations.

Heartfelt Creations Products and Product Sold On Their Web Site: Click HERE to visit the web store

HCDP1-2133  Floral Banner Paper Pad collection

HCPC-3969 Vining Clematis Banner cling

HCD1-7377 Vining Clematis Banner die

HCPC-3970 Peony and Sunflower cling

HCD1- 7378 Peony and Sunflower cling

HCD2-7381 Fancy Classic Oval Frame die

HCPC-3956 Clematis Birdhouse cling

HCD1- 7357 Clematis Birdhouse die

HCPC-3954 Clematis cling

HCD1-7355 Clematis die

HCFB1-5006 3D climbing Clematis  Shaping Mold

HCPC-3848 Cheerful Note Sentiments cling

HCST1-401 Deluxe Flower Shaping Kit

HCPP1-475 Deluxe Flower Shaping Card Stock Paper Pad- White- 50

HCDA1-449 Stack and Store Daubers- Packet of 6

HCGP1-488 Deluxe Gold  Card Stock

HCS1-459-4 Rock Candy Stamens-small

159723-Designer Dries Clear Adhesive

352954 Metal tip for Adhesive Bottles

173842-Score-pal Measuring and scoring Board

AM7454-Quick stick Tool

409311-Color In Water color brush-fine 

DDOTS- Double sided 3D Foam Dots 

359848 Spellbinders Tool ‘N One

RACP505 Ranger Archival Sepia ink

OTHER PRODUCTS USED:

Ink: Spectrum Nior Aqua Pencils: The clematis: Claret, Mango, Verdant Green. The leaves: Pesto Green. The birds: Apricot, Aqua, Mango. The bees: Orange, Mango. Butterfly Claret, Mango, Forest Green. Other: Fussy cutting Scissors, Ruler, Misti Stamping Tool, Double Sided 3D Foam Tape, Double Sided Tape, Hot Glue Gun, Ranger Archival Ink Venation Orange, Diamond stickles, Lime Green. Stickles.

INSTRUCTIONS:

This tent fold card measures   8  1 / 4 “ X  5  3 / 4 “    when completed.

Taking the white card stock to make a card base to the above measurements. Using the sheet 4A. Cut this a little smaller than the card front. Ink the edges of the paper with the dauber and the Venation Orange ink. Adhere to the card front with the double sided tape.

Make the frame by using the Fancy Classic Oval Frame die set, first using the outer die to cut a frame base. Die cut one from the sheet 4A and a second from the white card stock. Adhere these both together using the double sided tape. Adhere to the card front using the 3D foam dots.

Using the gold card stock die cut the thin frame from the second die in from the outside of the same die set. Adhere this to the frame base using the clear drying adhesive. To make the large circle frame, take the gold card stock and the 4th and the 5th die in, use together and die cut two. Place and adhere on the card front frame as seen in the project photo.

Taking the Vining Clematis banner stamp and the sepia ink to stamp the image. Stamp also the sentiment from the Cheerful Note Sentiments stamp set. Die cut the banner with the matching die. Use the spectrum Nior aqua pencils to bring color to the flowers and leaves on the banner: The Clematises: Claret, Mango, Verdant Green. The Leaves: Pesto Green. Adhere the finished banner to the card front.

The birds are taken from the Clematis Birdhouse sets and the butterflies and bees are taken from the Peony and Sunflower sets. Stamp these with the sepia ink onto the white card stock. The colors used are from the aqua pencils, they are: The leaves: Pesto Green. The birds: Apricot, Aqua, Mango. The bees: Orange, Mango. Butterfly Claret, Mango, Forest Green. Die cut these by using the matching dies. Bring shape to these by using the shaping tools. Fussy cut the birds feet away and adhere to the card banner as seen in the project photo.

Make the Clematis flowers by: Stamping, coloring and die cutting six large petals, five smaller petals, one for each flower. The colors used for the flowers are: Claret, Mango, Verdant Green. Bring shape to the petals by using the collection 3D shaping mold. Use the pricking tool from the flower shaping set and make a hole in the petal center, big enough to be able to get three folded stamens through it for the larger petals and two for the smaller petals. Adhere the stamens in place by using the hot glue gun. When the glue is cooled you can trim away the excess stamen stems ready for use. Arrange and adhere to the banner ends using the hot glue gun. Adhere the birds, butterflies and bees in place also using the hot glue gun. Apply diamond stickles to the butterflies and bees wings. Apply the Lime Green stickles to the flower centers in the banner and the tips of the stamens.

Adorable collections and so timeless.

Till next time...inky hugs and keep on keeping safe.

OXO

 

Lets celebrate...with beautiful Floral Banners

and the classic, timeless Fancy Classic Frames.

Heartfelt Creations Products and Product Sold On Their Web Site:

To visit the web store click HERE 

HCDP1-2133  Floral Banner Paper Pad collection

HCPC-3970  Peony and Sunflower Banner cling

HCD1-7378  Peony and Sunflower Banner die

HCD2-7381 Fancy Classic Oval Frame die

HCD2-7384 Fancy Classic Rectangle Frame die

HCPC- 3847 Celebrate Love Sentiments cling

HCST1-401  -Deluxe Flower Shaping Kit

HCPP1-475 -Deluxe Flower Shaping Card Stock Paper Pad- White- 50

HCGP1-493 Deluxe Silver Card Stock

159723-Designer Dries Clear Adhesive 352954

Metal tip for Adhesive Bottles

173842-Score-pal Measuring and scoring Board

AM7454-Quick stick Tool

409311-Color In Water color brush-fine 

DDOTS- Double sided 3D Foam Dots 

359848 Spellbinders Tool ‘N One

RACP505 Ranger Archival Ink Sepia  

 

OTHER PRODUCTS USED:

Ink: Spectrum Noir  Aqua Pencils: Pesto Green, Bottle Green, Parkeet, Pesto Green, Verdant Green, Verdant Green,  Violet, Mango, Carrot, Banan, Claret. Other: Fussy cutting Scissors, Ruler, Misti Stamping Tool, Double Sided 3D Foam Tape, Double Sided Tape, Hot Glue Gun, Foam card stock.

INSTRUCTIONS:

This tent fold card measures 7“ X 5“  when completed.

Using the outer die from the Fancy Classic Rectangle Frame die set and the white card stock, die cut two of these shapes. Die cut also one shape from the design paper from the collection paper pad sheet 4A . Adhere this to one of the white card stock shapes. Score  1“ across the top of the other white card stock shape, apply double sided tape and adhesive to the 1“ scored part. When placed together with the other card base shape this will form the tent fold card base.

Using the same die set make the silver frame using the 2nd  die in. Die cut a frame from both  the silver card stock and from the foam card stock. Adhere together using the clear drying adhesive. Adhere this to the card front.

 From the same die set take the 4th and 5th die in and the silver card stock and cut the shapes. Die cut also a oval shape from the Fancy Classic Oval Frame set. Adhere the oval to the card front using the foam 3D dots. Cut the 5 th  shape in half then adhere to under the oval ends. From the 4th die cut, trim the ends of so they can be adhered under the banner on top of the oval later.

Taking the white card stock, the sepia ink and the Peony banner stamp, stamp the image. Stamp also the sentiment then use the matching die set to die cut the shape. Bring color to the banner flowers and leaves by using the water color brush and the aqua pencils. The colors used are: Parakeet, Pesto Green, Verdant Green for the leaves and Violet, Mango, Carrot, Banan and Claret for the flowers and fillers. Bring a little shape to the flowers and leaves by using the flower shaping tools. Give the banner a curve by rolling it over your forefinger then adhere the banner to the silver oval on the card front with foam dots in the middle of the banner and clear drying adhesive at the ends, this will hold its curve. Align the silver card stock ends (pre-cut) and adhere in place.

 Have a great scrapping day and keep on keeping safe,

Inky hugs OXO