Friday, November 29, 2019

29th Black Friday 2019 #2 Window scenes collection...

...and ready made card bases....


‘THINKING OF YOU TODAY’    

Heartfelt Creations Products And Products Carried On Their Website:
HCDP1- 2109 Window Scenes paper collection
HCDP1-2108 Wild Wilderness paper collection
HCGP1-483 6” x 6” Interlocking Card-White
HCCB1-481 Round Bi-fold Card-White
HCD1-7272 Rounded Sunlight Window
HCD1-7274 Rounded Lattice Window
HCD1-7285 Window Hinges
HCFB1-469 3D Blossom Shaping Mold
HCPC-3839 Furry-Tailed Frolic 
HCD1-7197 Furry-Tailed Frolic
HCPC-3840 Oakberry Cottage & Sentiments
HCD1-7198 Oakberry Cottage & Sentiments
HCDC-3842 Oakberry Lane Blossoms
HCD1-7200 Oakberry Lane Blossoms
HCPC-3845 Just For You Sentiments
HCS1-458-2 Assorted Bright Pearl medium (Yellow)
HCDA1-449 Stack and Store Daubers pack of 6
HCST1-401 Deluxe Flower Shaping Kit
DDOTS Double Dots-3d foam circles
159723 Designer Dries Clear Adhesive
359848 Spellbinders Tool N’ one
85-glitter Crystal Ultrafine Transparent Glitter
3D1844 Crystal Lacquer
478455 Zigg Clean Color Real Brush Makers
RACP451 Coffee Archival Ink

Other Products Used:
Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping Tool, Sheena Douglas White Stamping Card, Spectrum Noir Harmony inks: Frozen Lake, Grasshopper, Pink Tulip, Chinese Red, Winter Rose. Thin Green satin ribbon (2 sorts), Pricking tool.



INSTRUCTIONS:
The finished size of this card is 6” x 6” 
Using the readymade Interlocking card as the card base, take the circle die from the Rounded Sunlight Window die set and the green colored paper for the background from the Window Scenes paper collection. Die cut the circle x 4. Cut these circles in ½ and adhere to the card ½ rounds, both sides. Find the striped paper from the Wild Wilderness paper collection and cut a 5 ½” x 5 ½” square from this paper. Ink the edges of this paper with the Frozen Lake ink. Ink the edges of the inside square with the Chinese Red ink. Now adhere the paper to the inside square as a base.
Taking the white card stock and both the Rounded Lattice ½ dies, using the scalloped outer edge for both dies, die cut x 4 of each die sort. Bring color to the ½ circles using the Chinese Red and the Frozen Lake inks. As seen in the card photo, adhere to all the ½ rounds of the card. Making sure the card folds are free to fold. 
Make the hinges by using the gold card stock and the latches die set. Make enough for each ½ circle edge plus a set for the ribbon slides at both sides of the card. When adhering in place, use the double sided tape and clear drying glue. Adhere the set of gold latches to the card front flaps to the edge for the ribbon slides. Cut enough ribbon to tie around the card and make a bow. This will be about 3-4 times the width of the card front. Thread the ends of all three ribbons through the latches ready to tie the bow.  Adhere the ribbons to the back of the card with a strip of double sided tape.
To make the rest of the embellishments used in this card stamp and die cut the following: 
x 4 medium sized flowers, x 4 smaller sized flowers, x 12 sets of leaves, x 1 of each of the squirrels plus 3 extra cuts for each as extra layers to make them into chipboards, x3 extra cuts for the squirrel and window frame to make them also into chipboards, x 2 of the nut house, x 2 each of the small circle and circle with the scalloped outer edge found in the Oakberry Lane set. (these will be used for the sentiments) Once the embellishments are stamped and die cut, bring color to them by using the Zigg coloring markers.
The colors used are: Caterpillar: 070 Orange, Butterfly:036 Light Blue, 050 Yellow, 090 Grey, Squirrel: 064 Oatmeal, 060 Brown, Nuts and Nut House: 062 Dark Brown, 065 Mid Brown, Grass: 043 Olive Green, Flowers: 047 May green, 050 Yellow, 070 Orange
Window glass: 031 Cobalt Blue, Latches:052 Bright Yellow, Window frames: 068 Deep Brown, Apron: 053 Yellow green, 050 Yellow, Pie:064 Oatmeal, 260 Deep Red.
To make the flowers used for this card: Using the stamp and die sets for the Oak Berry Blossoms flowers and the matching blossom shaping mold. Stamp and die cut enough to use for the card.  Color the elements using the Frozen Lake ink for the flowers and a Zigg maker 046 Mid Green for the leaves. When colored, run the flower petals and leaves through the die cutting machine with the mold. For each flower prick a hole in the centre with a pricking tool and thread the stamens through the hole. Secure the stamens using the hot glue gun. Trimming the stamen threads away and now they are ready to use. Now you can adhere them in place to the card flaps as seen in the card photos.
Ink the sentiment circles with the Chinese Red and the Frozen Lake inks. Stamp the sentiment to the small circle. Adhere both layers together with double sided tape or clear drying glue. Taking the Crystal Lacquer, apply this to the outer edge of the scalloped circle, to all the squirrels and the glass in the windows. Put the embellishments aside to dry (preferably over night). When they are dry and set, adhere in place all the elements used in the inner card square and to the ½ circles flaps as seen in the card photo. For the front right flap, when adhering the squirrel on the rubber wheel tire swing, make sure the ribbon falls under the embellishment and leaves so the ribbon stays in place ready to be tied into a bow later.
To finish the card, apply the diamond stickles to the flower petal edges. When the stickles are dry, close the card and tie the bow.




More details of this card...I made lots so have fun scrolling.















You know what they say....a picture says a thousand words...lol. Well there is a few thousand here.
Wishing you a fun BLACK FRIDAY at Heartfelt Creations....they know how to look after crafters...
Inky love...
Sussi

1 comment:

  1. Gorgeous! I just can't get over the variety of options with this new set! Amazing!

    ReplyDelete