SEA BREEZE collection, "Best Wishes"

Hi, today I have another card made using the wonderful SEA BREEZE collection from Heartfelt Creations....enjoy the journey...

Heartfelt Creations Products And Products Carried On Their Website:

HCDP1-2107 Sea Breeze paper collection

HCPC- 3890 Sea Breeze Harbor cling stamp set

HCD1-7264 Sea Breeze Harbor die set

HCPC-3891 Sand and Sunsets cling stamp set

HCD1-7265 Sand and Sunsets die set

HCPC- 3892 A Day At Sea cling stamp set

HCD1-7266 A Day At Sea die set

HCPC-3842 Oakberry Lane Blossoms cling stamp set

HCD1- 7200 Oakberry Lane Blossoms die set

HCFB1-469 3D Blossoms Shaping Mold

HCD1-776 Eyelet Oval die set-

HCD1-7192 Eyelet Lace Frame die set

HCPC-3800 Young At Heart cling stamp set

HCD1-7158 Young At Heart die set

HCS1-459-4 Rock candy (black)

HCDA1-449 Stack and Store Daubers pack of 6

HCST1-401 Deluxe Flower Shaping Kit

DDOTS Double Dots-3d foam circles

159723 Designer Dries Clear Adhesive

173842 Score-Pal Measuring and Scoring Board

359848 Spellbinders Tool N’ one

31510 Funnel tray

85-glitter Crystal Ultrafine Transparent Glitter

3D1844 Crystal Lacquer

478455 Zigg Clean Color Real Brush Makers

RACP500 Ranger Archival Ink Sepia

Other Products Used:

Diamond stickles, Sheena Douglas white stamping card, Hot glue Gun, Fussy cutting Scissors, Foam inking tool, Double sided Tape, Double Sided Foam Tape, Misti Stamping Tool, An old fine painting brush (for the glue).

Instructions:

The finished size of this card is   7 ½” x 5 1/16^th” (19cm x 13.1cm)

Make a tent fold card in the length to the above measurements from the white stamping card. Find the blue design paper in the paper collection. Cut this a little smaller than the card front. Taking the Oasis harmony ink and dauber or foam inking tool and ink the edges of both he design paper and the card front. Adhere the design paper piece to the card front.

Taking a sheet of white card and the Eyelet Lace die, die cut the lace background.  Taking the Oasis ink, apply to all the edges and the inside of the frame. Apply glue to this then the glitter. Put this aside to dry.

Taking a sheet of stamping card, the lighthouse stamp and die from the Sea Breeze Harbor sets and the Zigg Clean Color Real Brush Makers. Stamp, die cut then color the lighthouse scene. Taking the rock die from the set and cut the rocks out of the colored scene. Taking scrap white card cut x3 extra of the rock part of the scene. Adhere the rock layers together; the rocks will be adhered back into the scene later. Taking the oval die from the Eyelet Lace Frame set and cut the lighthouse scene into an oval.

With the prepared lace background and the oval lighthouse scene adhere all to the card front using the 3Dfoam dots and the hot glue gun. Now adhere the rocks back into the scene.

Make the sentiment flag, seagulls, sand birds and the grass tuffs by stamping die cutting then coloring. X2 sand birds, x2 grass tuffs, x1 seagulls (plus x3 extra from scraps), x1 sentiment flag.

The flowers you need for this card: From the Oakberry Blossoms set, x5 small, x8 med size and x7 leaf sets.  Stamp, die cut, color and shape these flowers by using the 3D Blossom Shaping Mold. Bring more shape to the flowers if needed using the shaping tools and matt. Once these are shaped prick a hole in the flower center then thread the rock candy stamens in the hole. Secure the stamens with the hot glue gun. Apply glue to the flower petals with the brush then dip into the glitter; using the stamen ends to hold the flower. Once the glue is dried trim away the stamen ends.

 The flowers are a perfect finish to the sea Breeze cards....even if it is for the men in your life. Till next time....have happy scrappy inky days. 

Sussipoppins hugs XXX

Susan

Heartfelt Creations new release Wednesday...'SEA BREEZE'

Warm balmy breezes, glistening sun baked sand, and the sound of frothy waves lapping at the shoreline are the perfect assembling of elements to create a tranquil and soothing haven where a tired soul can find rest. The sights, smells, and sounds of the ocean somehow know how speak to your inner most being and conjure up feelings of fresh hope, renewed dreams, and a sense of well-being, as troubles are cast aside, drifting off to the bottom of the sea. A large, towering lighthouse stands vigilant, ready to bring those at on the water safely home while at the same time beckoning you to come for a closer look as you stroll across the gritty ground, bending low to gather tiny, opalescent sea shells as your meander along the shoreline. Enjoy the peace and tranquility that sea breezes carry as you immerse yourself in the beauty and solitude of the new Sea Breeze Collection from Heartfelt Creations! Roll up your pant legs and stroll through a captivating paper collection filled with hues of crisp ocean blues, light sandy browns, glistening corals, and stunning sunset oranges intertwined with faded yellows and fiery reds. Discover beautiful beach scenes displaying stately lighthouses, soaring seagulls, and elegant sailboats as you saunter through every page of this peaceful and calming assembling of artistically styled decorative papers. Stamp, color and die cut your very own seaside harbour retreats for all of your paper crafting creations with the wonderful assortment of cling stamp sets and coordinating dies, boasting detailed illustrations of sand engulfed fences, rocky lighthouse abodes, charming row boats, and pretty sea shells. So, shed your sandals, breathe deeply, and join us as we take in the soothing ambiance of the seaside with the breathtaking Sea Breeze Collection.

Heartfelt Creations Products And Products Carried On Their Website:

HCDP1-2107 Sea Breeze paper collection

HCPC- 3890 Sea Breeze Harbor cling stamp set

HCD1-7264 Sea Breeze Harbor die set

HCPC-3891 Sand and Sunsets cling stamp set

HCD1-7265 Sand and Sunsets die set

HCPC- 3892 A Day At Sea cling stamp set

HCD1-7266 A Day At Sea die set

HCPC-3842 Oakberry Lane Blossoms cling stamp set

HCD1- 7200 Oakberry Lane Blossoms die set

HCFB1-469 3D Blossoms Shaping Mold

HCPC-3845 Just For You Sentiments cling stamp set

HCS1-459-4 Rock candy (black)

HCDA1-449 Stack and Store Daubers pack of 6

HCST1-401 Deluxe Flower Shaping Kit

DDOTS Double Dots-3d foam circles

159723 Designer Dries Clear Adhesive

173842 Score-Pal Measuring and Scoring Board

359848 Spellbinders Tool N’ one

31510 Funnel Tray

85-glitter Crystal Ultrafine Transparent Glitter

3D1844 Crystal Lacquer

478455 Zigg Clean Color Real Brush Makers

RACP500 Ranger Archival Ink Sepia

Other Products Used:

Diamond stickles, Sheena Douglas white stamping card, Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping Tool. Spectrum Noir Harmony ink: Sand storm.

The finished size of this hinged tent fold card is: 6 ¼” x 7 ½” (15.8cm x19cm) Make the card base to the above measurements from the white card. Find the paper print with the yellow, blue and sky shading in the Sea Breeze paper collection. Cut this a little smaller than the card base. From a piece of white card, cut this to 4 ½” x 5 ½” (11.5cm x 14.5cm). Find the frame stamp in the “Day At Sea” set also the inner frame die from the matching die set, stamp the image with the sepia ink and die cut using the inner frame die. Colour the stamped image with the zig marker pens and water. Taking the Sand Storm ink and inking tool or dauber, ink the edges of all the layers, card base, printed-paper and the card front with the die cut frame image. Putting the card front aside for later. The die cutting list: lighthouse: x 1 stamped, plus x 3 extra die cut layers, Clouds: x 3 small clouds plus x 3 extra layers die cut for two of the clouds, The seagulls: x 1 set stamped plus x 3 extra die cuts. The perching seagull: stamp x 1 plus x 3 extra die cut layers. The seashells: stamped x 3 plus die cut x 2 with the outer die and the third with the shell die, plus x 3 extra layers of die cuts for the shells. The leaves: stamp and die cut x 5 sets. The flowers: stamp and die cut x 4 med flowers and x 8 small flowers. The flowers are made so: Take the stamp and die collection set for these flowers and the matching blossom shaping mold. Stamp and die cut enough to use for the card. Colour the elements using the (Yellow) zigg marker pen and a water pen for the flowers and a green colour marker for the leaves. When coloured, run the flower petals and leaves through the die cutting machine with the mold. For each flower prick a hole in the centre with a pricking tool and thread the stamens through the hole. Secure the stamens using the hot glue gun. Before trimming the stamen threads away apply glue to the petal edges with the old water brush, dip the petals in the glitter and put aside to dry. When dry trim away the threads, now they are ready to use. Taking a scrap piece of white card for the sentiment. Find the sentiment stamp in the “Just For You” stamp set. Stamp with the sepia ink and trim the sentiment into two lines. Ink the edges of the sentiment then adhere the card front with 3D dots. Bring color to all the rest of the elements stamped, using the Zigg markers then adhere the matching element layers together ready for use. Taking the card front and the made elements, arrange them as seen in the photo, checking to see the placements work with the die cut frame in the card front before adhering in place. Adhere the flying seagulls to the top card front. Place and adhere the flowers and leaves in clusters to the left and right of the lower card front. Adhere the sentiment between the flower clusters. To finish the card apply glossy to the elements for attention and diamond stickles to the seashells.

This sure is a fun collection...great for all those sealing people and great for all the men in your life.

I loved working with this one....I love the sea.

Till next week with more from this collection...inky hugs

Susan XOX

"To The World"

Hi, here is another card using the 'Booklet' die collection.

Heartfelt Creations Products And Products Carried On Their Website:

HCDP1-2106 Wild Aster Paper collection

HCPC- 3887 Wild Aster cling stamp set

HCD1-7257 Wild Aster die set

HCPC-3888 Wild Aster Spray cling stamp set

HCD1-7258 Wild Aster Spray die set

HCD1-726O Booklet Basics die set

HCD1-7261 Booklet Frames die set

HCD1-7262 Swirl Border Accents die set

HCD1-7263 Swirly Accent Spray die set

HCDC-3844 For my friend Sentiment cling stamp set

ANC829 Express-O Yourself prills

RAHT Heat It Tool

359760Gold Embossing Powder

HCDA1-449 Stack and Store Daubers pack of 6

HCST1-401 Deluxe Flower Shaping Kit

DDOTS  Double Dots-3d foam circles

159723 Designer Dries Clear Adhesive

173842 Score-Pal Measuring and Scoring Board

359848 Spellbinders Tool N’ one

31510 Funnel tray

85-glitter Crystal Ultrafine Transparent Glitter

3D1844 Crystal Lacquer

359848 Spellbinders Tool N One

478455 Zig Clean Color Real Brush Makers

RACP436 Ranger Archival Ink Leaf Green

RACP475 Ranger Archival Ink Library Green

Other Products Used:

Diamond stickles, Sheena Douglas white stamping card, Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping Tool, Spectrum Noir Harmony Ink: Crushed Velvet, Pale Fig. Versa-mark, Craft foam, Foam inking tool.

INSTRUCTIONS:

This finished card measures 8 ½” x 6 ¾” (21.6cm x 17cm)

Make the tent fold card 8 ½” wide and 6 ¾” high. Find the design paper on the paper collection and add color to the edges with the Crushed velvet ink and the foam inking tool or a durbar.

Taking the corner die and the white card die cut x4 for each corner. Adhere for each corner, 4 layers together then apply the crushed velvet ink with the inking tool or a durbar. Taking the versa-mark, randomly swipe the corner element with the pad so it does not get covered completely.  Dip the corner into the gold embossing powder then use the heating tool to set the gold. This method is used for all the gold embossing on the elements in this card. Taking the white card and the small swirl corners, die cut x2 of these. Color and gold emboss the same as the corners. Adhere the swirl borders to each side of the card. Taking the larger booklet frame die and the booklet basic die to match also the middle-sized booklet frame die and the white card, die cut all once. Taking the inks crushed velvet, pale fig and he inking tool, bring color to the die cuts. Randomly gold emboss the lace edge of the frames. For the sentiment, take the sentiment from the for my friend sentiments stamp set and stamp this using the gold embossing powder to the right side of the page. Taking the score-pal make a fold down the center of the pages. Curl the pages by wrapping them around a glue bottle and your hands. Adhere in place using clear drying glue and the craft foam cut into strips, so the curl stays in place and the pages are lifted apart from each other.

To make the Asters, Stamp the flowers and leaves using the Library Green ink. Bring colour to the stamping using  Archival inks: Leaf green and the zig markers; Light violet and green. Once the colouring is done, die cut the shapes. Bring shape to the flowers and leaves by using the tools in the 3D flower shaping kit. To apply the prills: Apply clear drying glue to the flower centres then pour the prills over the flower. With the shaping tool press down on the prills so the prills go into the glue, set aside to dry.

You are doing two layers, so the under layer does not have prills on them, only the top layer.

The leaves are stamped, coloured and die cut, by using the 3D flower shaping tools shape the leaves from the back to how you want them.

Die cut with the white card 2x the swirls. Color these with the crushed velvet ink. Trim as needed so they will lay across the book from left to right as a base for the flower cluster. Adhere the flower cluster and leaves using the hot glue gun. Trim the flower sprays as fillers and adhere in the arrangement where needed. To the lower corners of the card, adhere 2x leaves as seen in the photo then a double aster flower in the center of the two leaves. To finish the card apply the diamond stickles to the flower sprays and flower tips.

Till next time, I wish you a happy inky scrappy time.

Sussipoppins Inky hugs

XXOXX

"The Joy Of The Lord"

This week Heartfelt Creations have launched a new side release. Fantastic dies to complement any collection. The 'Booklet' collection. 

I am showing you a card with both the new dies and the aster collection.

Heartfelt Creations Products And Products Carried On Their Website:

HCDP1-2106 Wild Aster Paper collection

HCPC- 3887 Wild Aster cling stamp set

HCD1-7257 Wild Aster die set

HCPC-3888 Wild Aster Spray cling stamp set

HCD1-7258 Wild Aster Spray die set

HCD1-726O Booklet Basics die set

HCD1-7261 Booklet Frames die set

HCD1-7262 Swirl Border Accents die set

HCD1-7263 Swirly Accent Spray die set

HCPC-3764 All Things Are Possible cling stamp set

HCDA1-449 Stack and Store Daubers pack of 6

HCST1-401 Deluxe Flower Shaping Kit

ANC829 Express-O Yourself prills

DDOTS  Double Dots-3d foam circles

159723 Designer Dries Clear Adhesive

173842 Score-Pal Measuring and Scoring Board

31510 Funnel tray

85-glitter Crystal Ultrafine Transparent Glitte

359848 Spellbinders Tool N One

478455 Zig Clean Color Real Brush Makers

RACP475 Ranger Archival Ink Library Green

 359760 Gold Embossing Powder

RAHT Heat It Craft Tool

Other Products Used:

Sheena Douglas white stamping card, Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping Tool, Versa-mark. Water brush pen. Spectrum Noir Harmony Inks: Winter Rose, Sand Storm. Foam inking tool. White crafting foam

INSTRUCTIONS:

This finished tent fold card measures 6.10” x 8.5” (16.9 cm x 21cm)

Make the tent fold card base to the above measurements. Taking the Winter Rose ink, ink the edges of the card base. Find the background paper used for this card in the paper collection, trim this a little smaller than the card base measurements. Adhere together.

Taking the Booklet Basics die cut x3 of the largest book page, x1 of the frame that will fit into the small lace Booklet Frames die used on this card. Find the Booklet Frames used, the largest and the smallest die cut x1 of each. Taking the Winter Rose and the Sand Storm ink and the foam inking tool or dauber and apply the color to the edges of all die cuts.

Taking the Swirl Boarder Accents Die set and the white card, die cut the larger swirl border x2. Ink this also the same as the booklet pages. Taking these swirl boarders and the lace booklet frames apply glue to these then the glitter. Put aside to dry.While the glue is drying make the flowers and sprays.

WILD ASTERS

To make the Asters, Stamp the flowers and leaves using the Library Green ink. Bring colour to the stamping using the, Wild Rose ink , zig markers: green for the stems and pink for the flower buds

Once the colouring is done, die cut the shapes. Bring shape to the flowers and leaves by using the tools in the 3D flower shaping kit. To apply the prills : apply clear drying glue to the flower centres then pour the prills over the flower. With the shaping tool press down on the prills so the prills go into the glue, set aside to dry. When making two layers for the asters, the under layer does not have prills on them, only the top layer.The sprays are stamped, coloured and die cut, by using the 3D flower shaping tools shape the flower buds from the back to how you want them. Trim the spray if needed so you can use small parts of the spray to fill the flower clusters.

Adhere the swirl boarder to both top and bottom of the card. Taking the largest lace book frame, adhere to the centre of the card.  Taking the booklet pages and the scoring tool, score down to make a centre fold of the pages. Curl the pages so they will fall when adhered like a 3d opened book. Stamp the sentiment onto the smallest page with the gold embossing powered. Stamp this also to a scrap white card so you can fussy cut the banner. When this is done add more of the winter rose ink to the banner. Apply extra of the sand storm ink over the sentiment to highlight it. Make also x2 of the book marks, ink this also with the winter rose ink. Adhere the pages together by adding strips of craft foam between the pages to lift them. Adhere with clear drying glue the strips and also at the centre page fold. Once this is done you can add the flower clusters. The book marks and the banner.

Don't you just love these dies....have fun playing with them.

Next week another show and tell using the booklet die collection.

Have fun,

Sussipoppins inky hugs

Sept 18th."Hey Friend" ASTER

Heartfelt Creations Products And Products Carried On Our Website:

HCDP1-2106 Wild Aster Paper collection

HCPC- 3887 Wild Aster cling stamp set

HCD1-7257 Wild Aster die set

HCPC-3888 Wild Aster Spray cling stamp set

HCD1-7258 Wild Aster Spray die set

HCPC- 3889 Wild Aster Scroll & Cluster cling stamp set

HCD1- 7259 Wild Aster Scroll & Cluster die set

HCD1-7256 Heart Of Joy Decorative Die set

HCD1-7203 Ornamental Tags die set

HCD1-7210 Eyelet Boarder Basics die set

HCDC-3844 For my friend Sentiment cling stamp set

HCDA1-449 Stack and Store Daubers pack of 6

HCST1-401 Deluxe Flower Shaping Kit

DDOTS  Double Dots-3d foam circles

159723 Designer Dries Clear Adhesive

173842 Score-Pal Measuring and Scoring Board

359848 Spellbinders Tool N’ one

31510 Funnel tray

85-glitter Crystal Ultrafine Transparent Glitter

478455 Zig Clean Color Real Brush Makers

RACP475 Ranger Archival Ink Library Green

RLHS100 Hydra Sponges

Other Products Used:

Diamond and golden rod stickles, Sheena Douglas white stamping card, Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping Tool, Spectrum Noir Harmony ink: Pale fig. Foam inking tool

INSTRUCTIONS:

This finished tent fold card measures 6 1/4” x 6 1/4” ” (16cm x16cm)

Make the tent fold card and then find the striped paper in the paper collection, cut this a little smaller than the card base. Taking the Pale fig ink and the foam inking tool or a dauber, ink the edges of the card base and paper. Adhere together using glue, double sided tape or a thin 3d foam tape.

Taking the white stamping card, die cut the band using the Eyelet Boarder Basic die set, the sentiment shield from the Ornamental Tags die set and the lace ½ circle from the Heart Of Joy Decorative die set. Apply the Pale fig to the edges of the band and the shield. Stamp the sentiment on the shield. Apply the glitter to the ½ circle and band by applying clear drying glue with a sponge or a brush, then dip into the glitter or sprinkle the glitter on the die cut.

To make the flowers and spray: Taking the white card, stamp and die cut x3 flower sprays, 2x flower boarders and 3-4 small flower spray fillers. Give color to the elements by using the zig markers listed. Follow the, how to make the flowers. Once the flowers etc are made you can decorate the card. First adhere the i/2 circle to the card front, then the flower sprays with the band. Adhere the shield with the sentiment to the center of the band. Adhere the flower border to the top of the lace circle. Trim and add the 2^nd flower border to under the band. Now adhere the double asters to the flower heads on the aster sprays and borders. Adhere the small sprays as fillers in the flower sprays o the card. Apply stickles to the flower heads and the golden rod to the flower head steams. Apply Light green zig marker to the leaf design on the sentiment then stickles to give attention to the sentiment.

To make the Asters, Stamp the flowers and leaves using the Library Green ink. Bring colour to the

Archival inks; Library and the zig markers: English Lavender, Lilac, Light green.

Once the colouring is done, die cut the shapes. Bring shape to the flowers and leaves by using the tools in the 3D flower shaping kit.

To apply the prills to the flower centres: apply clear drying glue to the flower centres then pour the prills over the flower. With the shaping tool press down on the prills so they go into the glue, set aside to dry.

When making two aster flower layers, the under layer does not have prills on them, only the top layer.

Did you enjoy that...hope so. I love playing with these asters. Next week there is a treat for you. Heartfelt Creations have for you a side release...to die for....lol.

Till then, Sussipoppins inky hugs.

"Thinking Of You"

Hi, we have a new release for you today...The 'Wild Aster' collection...

Heartfelt Creations Products And Products Carried On Our Website:

HCDP1-2106 Wild Aster Paper collection

HCPC- 3887 Wild Aster cling stamp set

HCD1-7257 Wild Aster die set

HCPC-3888 Wild Aster Spray cling stamp set

HCD1-7258 Wild Aster Spray die set

HCPC- 3889 Wild Aster Scroll & Cluster cling stamp set

HCD1- 7259 Wild Aster Scroll & Cluster die set

HCDA1-449 Stack and Store Daubers pack of 6

HCST1-401 Deluxe Flower Shaping Kit

DDOTS  Double Dots-3d foam circles

159723 Designer Dries Clear Adhesive

ANC814 Lettuce entertain you Prills

173842 Score-Pal Measuring and Scoring Board

359848 Spellbinders Tool N’ one

31510 Funnel tray

85-glitter Crystal Ultrafine Transparent Glitter

478455 Zig Clean Color Real Brush Makers

RACP475 Ranger Archival Ink Library Green

RACP436 Ranger Archival Ink Leaf Green

RACP993 Ranger Archival Ink Red Geranium

Other Products Used:

SUP Dazzling details glitter glue, Sheena Douglas white stamping card, Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping Tool. Ranger Inks: Archival Saffron ink, Spectrum Noir Harmony-Honeypot,

INSTRUCTIONS:

This finished tent fold card measures 6 1/2” x 8 1/4” ” (16.6cm x 20.9cm)

Make the tent fold card 61/2” wide and 81/4” high. Taking the Honey Pot ink and a foam-inking tool, ink the card base edges with this ink. Finding the paper in the paper collection for the card front background cut this a little smaller than the card base. Ink this also with the Honey Pot ink on the edges.Taking the stamp and die sets ‘Wild Aster Spray’ and the ‘Wild Aster Scroll & Cluster’ stamp, cut the Scroll and the flower sprays (x4) needed for this card from the Wild Aster Spray set . Bring color to the stamped images with the Archival inks Saffron, Red Geranium and Leaf Green. Apply the inks with the dauber tool. Use the zig marker pen-Red wine for the dots in the sprays and the dazzling details for the flower heads. 2x boarder sprays from the Wild Aster Spray set, 10 flowers from the Wild Aster set, 4x large aster sprays from the Wild Aster Spray set , 11x leaves. 2x sprays from the cluster from the Wild Aster Scroll & Cluster set

To make the Asters used in this card, stamp the flowers and leaves using the Library Green ink. Bring colour to the stamping using the Saffron for the flowers and the Leaf Green for the leaves. Once the colouring is done, die cut the shapes. Bring shape to the flowers and leaves by using the tools in the 3D flower shaping kit.

To apply the glitter to the flower centers, apply the clear drying glue to the flower petals at the centre going up the petal then dip into the glitter. Put aside to dry then apply the prills as so: apply clear drying glue to the flower centres then pour the prills over the flower. With the shaping tool press down on the prills so the prills go into the glue, set aside to dry.

The leaves are stamped, coloured and die cut, by using the 3D flower shaping tools shape the leaves from the back to how you want them.

To decorate the card: First trim the large flower sprays so they can be arranged to form a cluster on the card. Fill the cluster with the leaves and sentiment. When pleased with the arrangement, adhere in place with the hot glue gun. Adhere the already prepared aster flowers also with the hot glue gun onto the flower heads in the sprays so you get a 3d effect.. Add the small sprays as fillers where needed. Add the aster boarders along the bottom of the card, also adding the aster flowers in their place. Apply the dazzling details to the flower buds in the sentiment.

These Asters are such a wonderful addition to the Heartfelt Creations flower collections.

Next week we have more eye candy using this collection, so till then have a happy scrappy inking time.

Sussipoppins inky hugs

XOX

"Congratulations"

Products used:

HCDP1-2105 Candy Cane Cottage paper collection

HCPC-3885 Merry Moments cling stamp set

HCD1-7254 Merry Moments die set

HCPC- 3886 Season Of Glee cling stamp set

HCD1-7255 Season Of Glee cling stamp set

HCD1-7256 Heart of Joy Decorative die set

HCPC-3800 Young Of Heart cling stamp set

HCD1-7158 Young Of Heart cling stamp set

HCPC-3885 Candlelit Poinsettia cling stamp set

HCD1-7250 Candlelit Poinsettia die set

HCFB1- 478 Christmas Poinsettia 3D Shaping Mold

HCD1-7247 Regal Pocket Accents die set

HCD1-7202 Album Tags and Accents die set

HCPC 3883 Glow Of Christmas cling stamp set

HCD1-7251 Glow Of Christmas die set

HCDA1-449 Stack and Store Daubers pack of 6

HCST1-401 Deluxe Flower Shaping Kit

HCDA1-449 Daubers

DDOTS Double Dots-3d foam dots

159723 Designer Dries Clear Adhesive

173842 Score-Pal Measuring and Scoring Board

359848 Spellbinders Tool N’ one

31510 Funnel-tray

85-glitter Transparent Glitter

ANC814 Lettuce Entertain You Prills

3D1844 Crystal Lacquer

478455 Zig Clean Color Real Brush Maker

RACP451 Ranger Archival Ink Coffee

RACP475 Ranger Archival Ink Library Green

RACP436 Ranger Archival Ink Leaf Green

RACP993 Ranger Archival Ink Red Geranium

Other Products Used:

SUP dazzling Details glitter glue, Diamond stickles, Sheens Douglas white stamping card, Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping Tool, Spectrum Noir Harmony Inks: Bordeaux. Ranger foam inking tool

INSTRUCTIONS:

The finished card measures 6 ¼” X 8” (15.9cm x20.3cm)

Taking the white card stock make a tent fold card measuring 6 ¼” X 8” (15.9cm x20.3cm) Taking the Bordeaux ink and the foam inking tool dauber, bring color to the card base edges. Find the design paper in the ‘Candy Cane Cottage’ paper collection and cut this a little smaller than the card base, ink also the edges of this paper. Adhere to the card base using 3D foam tape.

To make the elements for the card front: Make the ½ circle lace pocket by using the ‘Heart of Joy Decorative Die’ set and the white stamping card. Die cut the ½ circle base and the lace ½ circle. Die cut also from the white stamping card, two pocket accents from the ‘Regal Pocket Accents’ die set. Use one of these for under the ½ circle on the card front. Apply glitter to all these die cuts by applying the clear drying glue to the lace then dipping into the glitter. Putting aside on the funnel tray to dry.  When dry adhere in place on the card front leaving the straight part of the ½ circle lose for the tag to go in.

Make the tag by die cutting from the white stamping card and the ‘Album Tags and Accents Die’ set. Die cut both sized tags. Ink the edges with the Bordeaux ink. Taking the snow stamp from the ‘Season Of Glee’ stamp set, stamp this with the coffee ink randomly on the tag front. Color the snow with the Vanilla zig marker.  Adhere the prepared remaining pocket accents die cut to the smaller tag. Adhere both the tags together using the 3D foam tape. Adhere this tag in place in the pocket.

Now you are ready to decorate the card with all the flowers and animals.

To make the Poinsettia flowers and Holly leaves, stamp the Candlelit Poinsettia’s and Holly leaves in the Library Green ink onto the white stamping card. Bring the color onto the image using the daubers and Archival inks. Red Geranium and leaf green are used for this. When finished coloring, die cut all then bring shape to the flowers and leaves by using the 3D flower mold. Use the flower shaping tools to bring further shape if needed.  Stack three layers together and adhere together by using the hot glue gun. Apply clear drying glue to the petal points with a brush then dip into the glitter. Put aside to dry on the funnel tray. When dry, tap the flower on the side of the tray to eliminate any excess glitter. Apply clear drying glue to the poinsettia flower centers then pour the prills onto the flower. Taking a shaping tool press lightly on the prills, this will push the prills into the glue. Put aside to dry on the tray, when dry they are ready to use on your card. Adhere the leaves and flowers to the ½ circle and the right side of the tag top. Make the sentiment using the stamp and die from the ‘Young At Heart’ sets. Curling the sentiment banner with a pen or your fingers. Adhere in place tucking under the flowers.

Taking all the stamps needed for the bear and penguins from the stamp sets listed in the product list. Once these are colored and die cut using the zig markers and matching dies, trim away any stamped image not needed when adhering in place. The hot glue gun and clear drying glue was used to adhere the bear and penguins to the card. When all is securely adhered in place apply the dazzling detail glitter glue to the hats and scarves. Use the crystal lacquer for the glasses, eyes, beaks and nose. Apply also to some of the penguin’s bodies.

Another cute winter card. Next week we have a new release...and that sure is fun if you like to color and make all your own elements for your cards. 

Till then, Have a inky scrappy week.

Sussipoppins Hugs

XOX