Wednesday, March 7, 2018

7th March brings you, a Heartfelt Creations Lush Lilac


6" x 6" mini book




Other Products Used: 
Card Stock: Bazzill: Mauve 12in x 12in (30cm x30cm) x 8. Other: Diamond Stickles, Versa-mark, Misti stamping tool, Water coloring brush, Scissors, Ruler, Black Archival Ink, Hot glue gun, Double sided tape, Cardboard, Sewing machine and thread, Repositionable tape, Round clear plastic bauble that opens. 2.75in (7cm)



Instructions:
Click HERE to see a video on how to make the the lush lilacs
The finished size of this mini book is 6in x 6in (15cm x 15cm)
Taking the 6x6 Layered circle card set, find the page with the 2.75in (7cm) pre cut circle in it, this is to be used as the front page. Or find the circle hole that fits your bauble. The remaining pages, it does not matter which order they are adhered to the spine as the circles in the pages will not bee seen when the book is finished. Begin constructing the book by adhering all the pages to the spine. Put aside and continue the preparation of the pockets; fold out pages and photo matting as follows:


For the pockets and the foldout pages, these are the same size:
From the card stock cut x 7, 5.70in x 11.41in (14.5cm x 29cm) Fold these in half so this will give you a folder measuring 5.70in x 5.70in (14.5cm x 14.5cm) 4 of these will be the pockets, the remaining will be the fold out pages.


For the pocket fold outs and single pocket insert:
Taking the cardstock sheets and cut x3, 4.92in x 11.02in (12.5cm x 28cm) Fold in half so the folded page will measure 4.92in x 4.92in (12.5cm x 14cm) cut x1 single page 4.92in x 5.51in (12.5cm x 14cm)
Front and back book covers:
From the off cuts from the pockets and fold out pages, cut 3x, 5.70in x 5.70in (14.5cm x 14.5cm) 1x 5.70in x 0.78in (14.5cm x 2cm)



For the eyelet circle around the circle inside cover:
Take the circle die that fits the circle hole, the eyelet circle die and the card-stock. Place the dies on the card-stock and use repositionable tape to secure the dies in position.



For the photo matting:
The Cut Mat Create die sets are used for this. Use the die size to fit the photos and journaling wanted for the book. Card-stock and the blue patterned design paper can be used for this as desired.



To make the pockets:
Take the boarder die, place and align to the front of the pocket so you are only cutting to the fold of the cardstock. Using the sewing machine, sew the pockets closed. Do this to all the pockets. Adhere to the book pages; this will cover any pre cut circle holes in the pages.


For the finishing of the book pages and pockets:
For the matting of the fold out pages: Taking the paper collection, find the design papers with the 6in x 6in (15cm x 15cm) mini prints and the large print design papers with the umbrella and tags. Chose the paper designs and cut to fit the foldout pages and pocket fold out pages. These are all cut a little smaller than the card-stock as matting. Adhere the matting papers in place. Larger photos and journaling can be added later to these pages. You can see the sample mini book has a few card-stock and design paper matting already adhered for photos.




For the 1st book page with the pocket and bauble: (above photos)
First make the flowers and flower buds ready by, finding the design paper print with the flowers and lilac buds. Stamp these using the versa-mark, glitter embossing powder and the aid of the Misti-stamping tool. Die cut the images out. Bring shape to the flowers and buds by using the Lush Lilac shaping mold. Bring further shaping to buds and flowers with the flower shaping tool kit. Put aside. Taking the bauble, separate the bauble and cut the hanging loop off with the scissors. Keep one side for this book and put the other side away for another project or book for another time. You could also make 2 books at the same time. If so, you will need double the cardstock and two paper pads for this. Taking the cardstock pieces for the front outside and inside cover of the book, the design paper for the front matting and the circle die that fits the pre-cut circle. Align the die to the papers and cut the circle out. Put the design paper with the circle cut out aside for the front covers later. Adhere all the papers and card-stock in place. The cut out circle from the design paper is aligned and adhered to the placement of the ½ bauble. Do this by placing the circle on the pocket and the ½ bauble on top. Shift them in place as you close the book cover. The bauble will then fit into the circle hole of the front cover. Taking the card-stock, note scroll image stamp and ink, stamp and die cut.  Die cut 3 extra cuts from cardboard and adhere the layers together. Taking the coloring pens, color the flowers and leaves on the scroll image. Trim, as needed the edges of the scroll so it will fit into the bauble when adhered to the design paper circle on the pocket. Adhere in place. Arrange and adhere the flowers to the scroll. If needed, add a little of the diamond stickles to the flower petals to get that glitter bling going. Taking the heart border die from the eyelet hearts die set and die cut the mini hearts from the card-stock as confetti. Place all the confetti, glitter glass, glass beads and sequins onto the scroll then, using wet glue adhere the bauble to its place to make the shaker. Careful not to move all the confetti, glass beads etc. on the scroll or it will stick to the sides. This will be the shaker. Carefully put aside so the glue can dry before the confetti etc. moves as a shaker. Once all is dry, adhere with the hot glue gun the 10 lilac buds to the out side of the bauble circle. Add and adhere the lilac flowers between and on top of the lilac buds to form a flower ring around the bauble. The card-stock single page when matted with the chosen design paper goes into this pocket. The adhered foldout pages are matted with the chosen design papers. 3 are needed for this. The same as for the fold out pages for the pockets, when finished these are slipped into the pocket with the foldout showing on the out side, thus hiding the pocket until opened.     
Out side book front cover: ( Photo's below)


 Inside book front cover and first page:


For the inside and outside of the front book cover: (photo's above)
Taking the 2 precut 5.70in x 5.70in (14.5cm x 14.5cm) card-stock with the circle cut out of it, adhere to the inside and to the out side cover.  Taking the pre-cut eyelet circle ring, adhere this to the inside front cover so the hole is framed. Taking the design paper used to for the circle for the bauble, adhere this to the front cover. Taking the circle dies that makes a 0.39in (1cm) frame for the circle hole in the front cover. Adhere this in place.  Adhere the lilac flowers on this frame, 2 deep. Adhere the lilacs 3 deep at the base of the frame as seen in the mini book photo. Thus making a flower frame around the circle hole. Add diamond stickles to bring more bling to the flowers if needed. Taking the cardstock precut for the book cover back and spine. Adhere in place. Cut a design paper strip for the spine. Adhere in place.





For the finishing of the book pages and pockets: (above photo's)
For the matting of the fold out pages: Taking the paper collection, find the design papers with the 6in x 6in (15cm x 15cm) mini prints and the large print design papers with the umbrella and tags. Chose the paper designs and cut to fit the foldout pages and pocket fold out pages. These are all cut a little smaller than the card-stock as matting. Adhere the matting papers in place. Larger photos and journaling can be added later to these pages. You can see the sample mini book has a few card-stock and design paper matting already adhered for photos.

To finish the book:
Add photos and journaling as wanted or if you give this book as a gift, the receiver can add photos etc. at their convenience. Using the rest of the collection stamps and dies, you can make more embellishments to add and decorate when the photos are adhered in place.



This is of course a basic book yet to be fully decorated. This is done once the photos are adhered in place.
Have fun with this....I did.
Inky hugs...next week we have a new release...you think this is a drop dead collection....wait till next week!
OXO
For more inspiration visit the Heartfelt Creations blog sign up so you don't miss a posting.


Wednesday, February 28, 2018

A Lush Lilac Heartfelt Creations Wednesday with....

'Have A Sweet Day'


Heartfelt Creations Products And Products Carried On Their Website:

Other Products Used:
Card Stock: Bazzill- Rose Beige and Mauve. Crafters Companion A4 White-hint of gold 300gm. Spectrum Noir Colour blend pencils: Pink Blush, Mauve, and Sage. Blending solution and blending stumps. Other: Stickles, Wow Sparkling Snow embossing powder, Heat Gun, Water Mister, Scissors, Ruler, Coffee Archival Ink, Hot glue gun, Versa-mark, Double sided Tape, Double sided 3d foam tape, Blue organza Ribbon, Cardboard, Misti stamping tool.



Instructions:
Go HERE to find the posting with a card that shows how to put the card base together.
The finished size of this slider card is 8.22in x 8.62in (20.9cm x 21.9cm) Taking the A4 card-stock, make hill and valley folds at 2in and at 4in (6cm and 12cm) Along the length. Taking the mauve card-stock cut the card foot and card background matting at 8.03in x 6.73in (20.4cm x 17.1cm). Taking the paper collection, find the paper print with the house on it. Cut the card front paper using the house as the feature, 8.89in length x 5.51in width (17.5cm x 14cm) Use the off cut design paper to cover the card foot and card back. Cutting a little smaller than the cardstock. Adhere in place. For the card front: taking a A4 cardstock, cut the card front base to measure 7.75in x 6.49in (19.7cm x 16.5cm) Taking the mauve card-stock cut the 1srt matting to measure 7.55in x 6.22 (19.2cm x 15.8cm) Taking the rose beige card-stock cut the 2nd matting to measure 7.16in x 5.82 (18.2cm x 14.8cm) Adhere the card front base, card-stock matting and the design paper front together using the 3d double-sided tape.  To make the slider, take a piece of A4 card-stock and cut to measure 2.75in x 4.33in (7cm x 11cm) and 4.13in x 1.77in (10.5cm x 4.5cm) Adhere the 2.75in (7cm) edge to the top center of the card background. Place double sided tape and wet glue to the 1.77in (4.5cm) edges. Place and adhere this at the center, 2.75in (7.5cm) down from the top edge of the back of the card front base. Once the glue has dried and secure, slide the slider into the holder on the card front base.


 Make the note scroll by stamping with the coffee ink onto the design paper. Die cut this with the matching die. Cut also 2 extra die cuts from the cardboard and adhere together to form a chippie. Add color to the flowers and leaves using the blender pencils and blending solution. Adhere to the left of the card front with the 3d foam dots. Make a double triple bow from the organza ribbon. Wrap a length of ribbon around the card front and adhere the bow to the right of the note scroll using the hot glue gun. 


Make the flowers buy finding the flower prints in the paper collection. Using the misti stamping tool to stamp the printed flowers with the flower stamp and wow embossing powder. Die cut with the matching die. 27 flowers are used for this card. Some of the flowers are not stamped with the embossing powder to give contrast. Bring shape to the flowers using the Lush Lilac flower mold. Use a small-balled tool from the flower shaping tool kit to press the center of the flowers to give height to the lilac petals. Adhere in place as seen in the card photo.


 Thanks for dropping by today. This collection is so sweet and timeless. The little Lilac flowers are so wonderful as fillers. I know if you invest in them and the matching flower shaping mold, you will not be sorry.
Have a happy scrappy day, till next week,
Inky hugs

Monday, February 26, 2018

Crafters Companion love this week is all about 'Friendship' 'Vriendschap'


Hi welcome to my place today. 
This time I am featuring the  elegant and timeless gold gilding wax on 3D embossing, stamping with gold embossing powder and off course the delightful matching stamps on heat resistant acetate.
Enjoy.



CRAFTERS COMPAINION PRODUCT LIST:
Beautiful Bouquet CC-ST-BBOU stamp.
‘Special  Friend’ DS-C-FRIEND, ‘Vriendschap’ DS-E-W-41-NL Desire dies.
Centura Pearl-snow white hint of gold A4 300gm, Fluttery Collection- 
Luxury matt mirror card S-F-MIRRORM, Fancy design,  card-stock. 
  Rose Bouquet EF5-3D-ROSE embossing folder.
Heat resistant acetate A4.
King Gold Gilding Wax.
Gemini.
Scoreboard.
 OTHER PRODUCTS USED:
Versa-Mark, Heat gun, Clear drying glue, Double sided tape, Crafting foam A4, Misti stamping tool
Sequins, Gold embossing powder, Fussy cutting scissors, Ruler







MEASUREMENTS and INSTRUCTIONS FOR THIS CARD:
#1  14.6cm x 19.2cm hint of gold cardstock
#2  14.1cm x 18.7cm – mirror card stock
#3  13.5cm x18.1cm – design cardstock
#4  12.3cm x16.9cm – mirror cardstock
#5   11.7cm x 16.3cm – embossed design card-stock

 Prepare the card tent fold base using measurements for #1. Cut x2, make a 1.5 cm fold on one piece. Apply double sided tape and glue to the fold. Adhere both cardstock together.
Taking the design card-stock cut both sizes #5 and #3. Taking #5 emboss this with the embossing folder. Apply the gilding wax to the edges and out towards the card-stock centre to highlight the embossing. Apply a little at a time, adding more if wanted.
Taking the mirror card-stock cut the matting for #2 and #4. Adhere all the matting layers to the card base using the double-sided 3D tape or the crafting foam to give dimension and shadows in the matting layers.
Taking the acetate, gold emboss stamp x2 jars and x3 the rose with the stem. Fussy cut the images. Adhere one of the jars to the embossed card front with a cut to size clear glue dot. Adhere a few sequins then adhere the 2nd jar the same way. Add a few sequins to this jar and a few scattered under the jar as seen in the photo.
Taking the mirror card-stock cut the sentiments. Adhere to the top left and the right of the foot of the card.

 I hope you enjoyed the visit, have a happy scrappy crafting day....Inky hugs


Wednesday, February 21, 2018

Its Heartfelt Creations Wednesday with the Lush Lilac collection again.

Hi, today I have another wonderful card featuring gorgeous Lush Lilac collection...


Heartfelt Creations Products And Products Carried On Their Website: 
HCDP1- 287 Lush Lilac paper pad collection
HCPC-3816 Lush Lilac cling stamp set
HCD1-7171 Lush Lilac die set
HCD1-7118 Delicate Border dies
HCD1-7119 Classic Border Basics dies
HCD1-745 Luggage and Tags dies
HCST1-401 Deluxe Flower Shaping Kit
HCDA1-449 Stack and Store Daubers pack of 6
HCFB1-466 3D Lush Lilac Shaping Mold
RAHT Heat It Tool
532423-Kit Sizzix Vagabond 2
DDOTS Double Dots/3d foam squares
159723 Designer Clear Drying Glue
173842 Score-Pal
359848 Spellbinders Tool N’ one

Other Products Used:
Card-stock: Kraft card-stock, Rose Beige Bazzill card-stock.  Inks: Coffee Archival Ink, Milled Lavender, Walnut Stain distress inks. Other: Versa-mark, Wow Sparkling snow embossing powder, Diamond Stickles, Hot Glue Gun, Water Mister, Fussy Cutting Scissors, Double sided Tape, Mauve Organza Ribbon, Misti Stamping Tool, Pencil. Wasi Tape.


Instructions:
The finished size of this tent fold card is 6in x 6in (15cm x 15cm) Taking the Kraft card-stock and cutting it to measure 6in x 12in (15cm x 30cm)  Use the score-pal to make the fold  for the tent fold card. Taking the paper collection, find the design paper with the birds in it and the paper with the 3 tags. For the tags: Die cut the tags using the Luggage and Tags die set. Ink the edges of the tags with the walnut stain ink and daubers. For the card front: Taking the design paper, cut this to 3.94in x 4.92in (10cm x12.5cm) Take the Classic Border Basics die set and use the plain border die to cut the design paper in half from corner to corner. Ink all the edges of the cut design paper by using a dauber and the inks, milled lavender and walnut stain. Taking the rose beige card-stock cut 6in x 6in (15cm x 15cm) Place the cut design papers onto the cut card-stock a little from the straight edge then taking the pencil; draw the placement line for the lace border. Take the design paper away and die cut the boarders using the placement lines. You will now have two card-stock fronts with a border. Ink both the lace border edges using the walnut stain distress ink and daubers. Adhere the card front layers together then adhere to the card front base, using the 3d foam dots, as seen in the card photo. Adhere the tags in place. Taking the paper collection, find the paper with the lilac flower print. Using the versa-mark, embossing powder, stamp and the Misti stamping tool, stamp the flowers and buds. Taking the matching die set, die cut 23 flowers and 2 lilac bud images. Run the flowers through the vagabond machine using the Lush Lilac shaping mold to give shape to the lilacs and the buds also use the flower shaping tool kit. Taking the organza ribbon, make a double triple bow. Adhere the bow to the card front under the tags. Adhere the flower buds and flowers to the ribbon knot with the hot glue gun. Arrange and adhere with the hot glue gun the rest of the lilac flowers to the tags, border and under the bird on the card front. To finish the card, add the diamond stickles to each of the lilac flower centers in the paper print. Add also to the lilac flowers if wanting more bling.





I love decorating the bow knots with the lilacs.
This week all soft colors....lol.
I loved to share with you today. Don't forget to return to the Heartfelt Creations blog and store site,
There is so much more eye candy.
Inky hugs....till next week.
OXO