SEA BREEZE "Hey Its Your Special Day"

Hi, 
today I am sharing another card from the SEA BREEZE collection...can't get enough of it...

Heartfelt Creations Products And Products Carried On Their Website:

HCDP1-2107 Sea Breeze paper collection

HCPC- 3890 Sea Breeze Harbor cling stamp set

HCD1-7264 Sea Breeze Harbor die set

HCPC-3891 Sand and Sunsets cling stamp set

HCD1-7265 Sand and Sunsets die set

HCPC- 3892 A Day At Sea cling stamp set

HCD1-7266 A Day At Sea die set

HCPC-3842 Oakberry Lane Blossoms cling stamp set

HCD1- 7200 Oakberry Lane Blossoms die set

HCFB1-469 3D Blossoms Shaping Mold

HCD1-776 Eyelet Oval die set-

HCD1-7255 Circle Basics Large

HCPC-3845 Just For You Sentiments cling stamp set

HCS1-458-2 Bright Pearl-med (pink)

HCDA1-449 Stack and Store Daubers pack of 6

HCST1-401 Deluxe Flower Shaping Kit

DDOTS  Double Dots-3d foam circles

159723 Designer Dries Clear Adhesive

173842 Score-Pal Measuring and Scoring Board

359848 Spellbinders Tool N’ one

31510 Funnel tray

85-glitter Crystal Ultrafine Transparent Glitter

3D1844 Crystal Lacquer

478455 Zigg Clean Color Real Brush Makers

RACP500 Ranger Archival Ink Sepia

Other Products Used:

Diamond stickles, Sheena Douglas white stamping card, Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping Tool, An old water color brush.

Instructions:

The finished size of this card is: 6 1/4 x 8 1/4 (15.8cm x 20.8 cm)

Make the tent fold card to the above measurements from the white card.

Find the paper from the Sea Breeze collection with a yellow and blue background. Cut this a little smaller than the card front measurements. Taking the Honey Pot ink, bring color to the edges of both the paper and card front using a foam inking tool or a Dauber inking tool.

Taking the white card and the outer die from the Eyelet Oval die set, die cut this oval. Taking the same design paper from the paper pad, die cut the inner oval. Taking the foam inking tool and the Honey Pot ink, ink the edges of both card and paper ovals. Apply glue with the old water brush to the eyelet lace of the outer oval then dip into the glitter. When the glue is dry adhere the ovals together using 3D foam tape or dots, then to the card base with 3D foam tape or dots. 

Make the elements used for this card by stamping, die cutting from the sets listed. The flying seagulls, the perched seagull, the boat x8 grass tuffs, x3 clouds, x6 leaves, x6 med flowers and x9 small flowers. Bring color to the elements by using the zig marker pens and water. Die cut from the white card extra layers for the boat, seagulls, rocks, lighthouse scene and floats on the perched seagull. Arrange the elements in layers and adhere to the card front using 3D dots, the hot glue gun and glue.

To make the Oak Berry Blossoms for this card: 
Take the stamp and die collection set for these flowers and the matching blossom shaping mold. Stamp and die cut enough to use for the card. Colour the elements using the (Pink) zigg marker pen and a water pen for the flowers and a green colour marker for the leaves. When coloured, run the flower petals and leaves through the die cutting machine with the mold.  For each flower prick a hole in the centre with a pricking tool and thread the stamens through the hole. Secure the stamens using the hot glue gun. Before trimming the stamen threads away apply glue to the petal edges with the old water brush, dip the petals in the glitter and put aside to dry. When dry trim away the threads, now they are ready to use.

To make the sentiment, stamp the sentiment with the sepia ink onto the white card then taking the two circles dies from the “Circle Basics” die set that fit to make a ring. Cut the sentiment into a ring. Ink the edges of the ring with the Honey Pot ink. Adhere to the card front. Taking the crystal lacquer, apply this to the: seagulls, windows of the lighthouse and the sentiment ring

Thanks for visiting...see you next time with more eye candy. 

Till then have a happy scrappy inky week.

Susan....XX

The SEA BREEZE collection"Thinking Of You Today"

Hi, I hope you are having a crafty fun day today...
I love these sail boats and the details one can get with all the elements in this collection.

Heartfelt Creations Products And Products Carried On Their Website:

HCDP1-2107 Sea Breeze paper collection

HCPC- 3890 Sea Breeze Harbor cling stamp set

HCD1-7264 Sea Breeze Harbor die set

HCPC-3891 Sand and Sunsets cling stamp set

HCD1-7265 Sand and Sunsets die set

HCPC- 3892 A Day At Sea cling stamp set

HCD1-7266 A Day At Sea die set

HCPC-3842 Oakberry Lane Blossoms cling stamp set

HCD1-7200 Oakberry Lane Blossoms die set

HCFB1-469 3D Blossoms Shaping Mold

HCD1-776 Eyelet Oval die set

HCPC-3867 Cherry Blossom Retreat cling stamp set

HCD1-7231 Cherry Blossom Retreat die set

HCS1-459-4 Rock candy (black)

HCDA1-449 Stack and Store Daubers pack of 6

HCST1-401 Deluxe Flower Shaping Kit

DDOTS Double Dots-3d foam circles

159723 Designer Dries Clear Adhesive

173842 Score-Pal Measuring and Scoring Board

359848 Spellbinders Tool N’ one

31510 Funnel tray

85-glitter Crystal Ultrafine Transparent Glitter

3D1844 Crystal Lacquer

478455 Zigg Clean Color Real Brush Makers

RACP500 Ranger Archival Ink Sepia

Other Products Used:

Sheena Douglas white stamping card, Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping Tool. Spectrum Noir Harmony Honey Pot ink., An old water painting brush for the glue

INSTRUCTIONS:

The finished size of this hinged tent fold card is 8 ¼” x 5 ¾” (20.8cm x 14.5cm)

Cut the hinged tent fold card to the above measurements. Before adhering together: Find the design paper in the paper collection with the yellow and blue in the print. Trim this a little smaller than the card base. Adhere to the card front. Taking the oval die from the Eyelet oval frame die and cut an oval in the middle of the card front. For the card back inside, stamp the lighthouse with the rocks in front of it and color this with the zig markers. Taking the matching die for the rocks stamp and die cut this a few extra times. When colored adhere to the lighthouse scene in its place. Taking the Honey Pot ink and inking foam tool, ink around the edges of the stamping so you have a yellow hue around the scene when the card is closed. Add a yellow hue where the light is in the lighthouse. Taking the cloud stamp, stamp die cut then color x 2. Adhere a large and small cloud to the lighthouse scene. Now adhere the card hinges together to form the tent fold.

Adhere a large cloud to the card front so it laps over into the oval hole.  Stamp three extra lighthouse scenes, as you will use the water part of the stamping. Trim away the water once it is colored. Adhere to the lower oval and inside of the card so you see only water for a base. Make two boats and adhere as seen in the card photo. Make the sentiment using the sign from the Cherry Blossom Retreat stamp and die sets. Make the sea gulls, die cut extra for the layering 3-4 layers. Adhere together then adhere to the card front.

Make the flowers: Take the stamp and die collection set for these flowers and the matching blossom shaping mold. Stamp and die cut enough to use for the card. Color the elements using the Yellow zigg marker pen and a water pen for the flowers and a green color marker for the leaves. When colored, run the flower petals and leaves through the die cutting machine with the mold.  For each flower prick a hole in the centre with a pricking tool and thread the stamens through the hole. Secure the stamens using the hot glue gun. Before trimming the stamen threads away apply glue to the petal edges with the old water brush, dip the petals in the glitter and put aside to dry. When dry trim away the threads, now they are ready to use.

Adhere in clusters to the top left of the oval and lower right. Placing the sentiment then another cluster of two flowers and leaves to the left side. To finish the card, apply the liquid Lacquer to the sentiment, seagulls, bouts and all the windows in the scene.

Another fun card for the men in our life....made with love.

Till next time with more eye candy...scrappy inky hugs.

XxX

Have a scrappy week, sussipoppins.

Susan

SEA BREEZE collection, "Best Wishes"

Hi, today I have another card made using the wonderful SEA BREEZE collection from Heartfelt Creations....enjoy the journey...

Heartfelt Creations Products And Products Carried On Their Website:

HCDP1-2107 Sea Breeze paper collection

HCPC- 3890 Sea Breeze Harbor cling stamp set

HCD1-7264 Sea Breeze Harbor die set

HCPC-3891 Sand and Sunsets cling stamp set

HCD1-7265 Sand and Sunsets die set

HCPC- 3892 A Day At Sea cling stamp set

HCD1-7266 A Day At Sea die set

HCPC-3842 Oakberry Lane Blossoms cling stamp set

HCD1- 7200 Oakberry Lane Blossoms die set

HCFB1-469 3D Blossoms Shaping Mold

HCD1-776 Eyelet Oval die set-

HCD1-7192 Eyelet Lace Frame die set

HCPC-3800 Young At Heart cling stamp set

HCD1-7158 Young At Heart die set

HCS1-459-4 Rock candy (black)

HCDA1-449 Stack and Store Daubers pack of 6

HCST1-401 Deluxe Flower Shaping Kit

DDOTS Double Dots-3d foam circles

159723 Designer Dries Clear Adhesive

173842 Score-Pal Measuring and Scoring Board

359848 Spellbinders Tool N’ one

31510 Funnel tray

85-glitter Crystal Ultrafine Transparent Glitter

3D1844 Crystal Lacquer

478455 Zigg Clean Color Real Brush Makers

RACP500 Ranger Archival Ink Sepia

Other Products Used:

Diamond stickles, Sheena Douglas white stamping card, Hot glue Gun, Fussy cutting Scissors, Foam inking tool, Double sided Tape, Double Sided Foam Tape, Misti Stamping Tool, An old fine painting brush (for the glue).

Instructions:

The finished size of this card is   7 ½” x 5 1/16^th” (19cm x 13.1cm)

Make a tent fold card in the length to the above measurements from the white stamping card. Find the blue design paper in the paper collection. Cut this a little smaller than the card front. Taking the Oasis harmony ink and dauber or foam inking tool and ink the edges of both he design paper and the card front. Adhere the design paper piece to the card front.

Taking a sheet of white card and the Eyelet Lace die, die cut the lace background.  Taking the Oasis ink, apply to all the edges and the inside of the frame. Apply glue to this then the glitter. Put this aside to dry.

Taking a sheet of stamping card, the lighthouse stamp and die from the Sea Breeze Harbor sets and the Zigg Clean Color Real Brush Makers. Stamp, die cut then color the lighthouse scene. Taking the rock die from the set and cut the rocks out of the colored scene. Taking scrap white card cut x3 extra of the rock part of the scene. Adhere the rock layers together; the rocks will be adhered back into the scene later. Taking the oval die from the Eyelet Lace Frame set and cut the lighthouse scene into an oval.

With the prepared lace background and the oval lighthouse scene adhere all to the card front using the 3Dfoam dots and the hot glue gun. Now adhere the rocks back into the scene.

Make the sentiment flag, seagulls, sand birds and the grass tuffs by stamping die cutting then coloring. X2 sand birds, x2 grass tuffs, x1 seagulls (plus x3 extra from scraps), x1 sentiment flag.

The flowers you need for this card: From the Oakberry Blossoms set, x5 small, x8 med size and x7 leaf sets.  Stamp, die cut, color and shape these flowers by using the 3D Blossom Shaping Mold. Bring more shape to the flowers if needed using the shaping tools and matt. Once these are shaped prick a hole in the flower center then thread the rock candy stamens in the hole. Secure the stamens with the hot glue gun. Apply glue to the flower petals with the brush then dip into the glitter; using the stamen ends to hold the flower. Once the glue is dried trim away the stamen ends.

 The flowers are a perfect finish to the sea Breeze cards....even if it is for the men in your life. Till next time....have happy scrappy inky days. 

Sussipoppins hugs XXX

Susan

Heartfelt Creations new release Wednesday...'SEA BREEZE'

Warm balmy breezes, glistening sun baked sand, and the sound of frothy waves lapping at the shoreline are the perfect assembling of elements to create a tranquil and soothing haven where a tired soul can find rest. The sights, smells, and sounds of the ocean somehow know how speak to your inner most being and conjure up feelings of fresh hope, renewed dreams, and a sense of well-being, as troubles are cast aside, drifting off to the bottom of the sea. A large, towering lighthouse stands vigilant, ready to bring those at on the water safely home while at the same time beckoning you to come for a closer look as you stroll across the gritty ground, bending low to gather tiny, opalescent sea shells as your meander along the shoreline. Enjoy the peace and tranquility that sea breezes carry as you immerse yourself in the beauty and solitude of the new Sea Breeze Collection from Heartfelt Creations! Roll up your pant legs and stroll through a captivating paper collection filled with hues of crisp ocean blues, light sandy browns, glistening corals, and stunning sunset oranges intertwined with faded yellows and fiery reds. Discover beautiful beach scenes displaying stately lighthouses, soaring seagulls, and elegant sailboats as you saunter through every page of this peaceful and calming assembling of artistically styled decorative papers. Stamp, color and die cut your very own seaside harbour retreats for all of your paper crafting creations with the wonderful assortment of cling stamp sets and coordinating dies, boasting detailed illustrations of sand engulfed fences, rocky lighthouse abodes, charming row boats, and pretty sea shells. So, shed your sandals, breathe deeply, and join us as we take in the soothing ambiance of the seaside with the breathtaking Sea Breeze Collection.

Heartfelt Creations Products And Products Carried On Their Website:

HCDP1-2107 Sea Breeze paper collection

HCPC- 3890 Sea Breeze Harbor cling stamp set

HCD1-7264 Sea Breeze Harbor die set

HCPC-3891 Sand and Sunsets cling stamp set

HCD1-7265 Sand and Sunsets die set

HCPC- 3892 A Day At Sea cling stamp set

HCD1-7266 A Day At Sea die set

HCPC-3842 Oakberry Lane Blossoms cling stamp set

HCD1- 7200 Oakberry Lane Blossoms die set

HCFB1-469 3D Blossoms Shaping Mold

HCPC-3845 Just For You Sentiments cling stamp set

HCS1-459-4 Rock candy (black)

HCDA1-449 Stack and Store Daubers pack of 6

HCST1-401 Deluxe Flower Shaping Kit

DDOTS Double Dots-3d foam circles

159723 Designer Dries Clear Adhesive

173842 Score-Pal Measuring and Scoring Board

359848 Spellbinders Tool N’ one

31510 Funnel Tray

85-glitter Crystal Ultrafine Transparent Glitter

3D1844 Crystal Lacquer

478455 Zigg Clean Color Real Brush Makers

RACP500 Ranger Archival Ink Sepia

Other Products Used:

Diamond stickles, Sheena Douglas white stamping card, Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping Tool. Spectrum Noir Harmony ink: Sand storm.

The finished size of this hinged tent fold card is: 6 ¼” x 7 ½” (15.8cm x19cm) Make the card base to the above measurements from the white card. Find the paper print with the yellow, blue and sky shading in the Sea Breeze paper collection. Cut this a little smaller than the card base. From a piece of white card, cut this to 4 ½” x 5 ½” (11.5cm x 14.5cm). Find the frame stamp in the “Day At Sea” set also the inner frame die from the matching die set, stamp the image with the sepia ink and die cut using the inner frame die. Colour the stamped image with the zig marker pens and water. Taking the Sand Storm ink and inking tool or dauber, ink the edges of all the layers, card base, printed-paper and the card front with the die cut frame image. Putting the card front aside for later. The die cutting list: lighthouse: x 1 stamped, plus x 3 extra die cut layers, Clouds: x 3 small clouds plus x 3 extra layers die cut for two of the clouds, The seagulls: x 1 set stamped plus x 3 extra die cuts. The perching seagull: stamp x 1 plus x 3 extra die cut layers. The seashells: stamped x 3 plus die cut x 2 with the outer die and the third with the shell die, plus x 3 extra layers of die cuts for the shells. The leaves: stamp and die cut x 5 sets. The flowers: stamp and die cut x 4 med flowers and x 8 small flowers. The flowers are made so: Take the stamp and die collection set for these flowers and the matching blossom shaping mold. Stamp and die cut enough to use for the card. Colour the elements using the (Yellow) zigg marker pen and a water pen for the flowers and a green colour marker for the leaves. When coloured, run the flower petals and leaves through the die cutting machine with the mold. For each flower prick a hole in the centre with a pricking tool and thread the stamens through the hole. Secure the stamens using the hot glue gun. Before trimming the stamen threads away apply glue to the petal edges with the old water brush, dip the petals in the glitter and put aside to dry. When dry trim away the threads, now they are ready to use. Taking a scrap piece of white card for the sentiment. Find the sentiment stamp in the “Just For You” stamp set. Stamp with the sepia ink and trim the sentiment into two lines. Ink the edges of the sentiment then adhere the card front with 3D dots. Bring color to all the rest of the elements stamped, using the Zigg markers then adhere the matching element layers together ready for use. Taking the card front and the made elements, arrange them as seen in the photo, checking to see the placements work with the die cut frame in the card front before adhering in place. Adhere the flying seagulls to the top card front. Place and adhere the flowers and leaves in clusters to the left and right of the lower card front. Adhere the sentiment between the flower clusters. To finish the card apply glossy to the elements for attention and diamond stickles to the seashells.

This sure is a fun collection...great for all those sealing people and great for all the men in your life.

I loved working with this one....I love the sea.

Till next week with more from this collection...inky hugs

Susan XOX

"To The World"

Hi, here is another card using the 'Booklet' die collection.

Heartfelt Creations Products And Products Carried On Their Website:

HCDP1-2106 Wild Aster Paper collection

HCPC- 3887 Wild Aster cling stamp set

HCD1-7257 Wild Aster die set

HCPC-3888 Wild Aster Spray cling stamp set

HCD1-7258 Wild Aster Spray die set

HCD1-726O Booklet Basics die set

HCD1-7261 Booklet Frames die set

HCD1-7262 Swirl Border Accents die set

HCD1-7263 Swirly Accent Spray die set

HCDC-3844 For my friend Sentiment cling stamp set

ANC829 Express-O Yourself prills

RAHT Heat It Tool

359760Gold Embossing Powder

HCDA1-449 Stack and Store Daubers pack of 6

HCST1-401 Deluxe Flower Shaping Kit

DDOTS  Double Dots-3d foam circles

159723 Designer Dries Clear Adhesive

173842 Score-Pal Measuring and Scoring Board

359848 Spellbinders Tool N’ one

31510 Funnel tray

85-glitter Crystal Ultrafine Transparent Glitter

3D1844 Crystal Lacquer

359848 Spellbinders Tool N One

478455 Zig Clean Color Real Brush Makers

RACP436 Ranger Archival Ink Leaf Green

RACP475 Ranger Archival Ink Library Green

Other Products Used:

Diamond stickles, Sheena Douglas white stamping card, Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping Tool, Spectrum Noir Harmony Ink: Crushed Velvet, Pale Fig. Versa-mark, Craft foam, Foam inking tool.

INSTRUCTIONS:

This finished card measures 8 ½” x 6 ¾” (21.6cm x 17cm)

Make the tent fold card 8 ½” wide and 6 ¾” high. Find the design paper on the paper collection and add color to the edges with the Crushed velvet ink and the foam inking tool or a durbar.

Taking the corner die and the white card die cut x4 for each corner. Adhere for each corner, 4 layers together then apply the crushed velvet ink with the inking tool or a durbar. Taking the versa-mark, randomly swipe the corner element with the pad so it does not get covered completely.  Dip the corner into the gold embossing powder then use the heating tool to set the gold. This method is used for all the gold embossing on the elements in this card. Taking the white card and the small swirl corners, die cut x2 of these. Color and gold emboss the same as the corners. Adhere the swirl borders to each side of the card. Taking the larger booklet frame die and the booklet basic die to match also the middle-sized booklet frame die and the white card, die cut all once. Taking the inks crushed velvet, pale fig and he inking tool, bring color to the die cuts. Randomly gold emboss the lace edge of the frames. For the sentiment, take the sentiment from the for my friend sentiments stamp set and stamp this using the gold embossing powder to the right side of the page. Taking the score-pal make a fold down the center of the pages. Curl the pages by wrapping them around a glue bottle and your hands. Adhere in place using clear drying glue and the craft foam cut into strips, so the curl stays in place and the pages are lifted apart from each other.

To make the Asters, Stamp the flowers and leaves using the Library Green ink. Bring colour to the stamping using  Archival inks: Leaf green and the zig markers; Light violet and green. Once the colouring is done, die cut the shapes. Bring shape to the flowers and leaves by using the tools in the 3D flower shaping kit. To apply the prills: Apply clear drying glue to the flower centres then pour the prills over the flower. With the shaping tool press down on the prills so the prills go into the glue, set aside to dry.

You are doing two layers, so the under layer does not have prills on them, only the top layer.

The leaves are stamped, coloured and die cut, by using the 3D flower shaping tools shape the leaves from the back to how you want them.

Die cut with the white card 2x the swirls. Color these with the crushed velvet ink. Trim as needed so they will lay across the book from left to right as a base for the flower cluster. Adhere the flower cluster and leaves using the hot glue gun. Trim the flower sprays as fillers and adhere in the arrangement where needed. To the lower corners of the card, adhere 2x leaves as seen in the photo then a double aster flower in the center of the two leaves. To finish the card apply the diamond stickles to the flower sprays and flower tips.

Till next time, I wish you a happy inky scrappy time.

Sussipoppins Inky hugs

XXOXX