Friday, November 29, 2019

29th Black Friday 2019 #2 Window scenes collection...

...and ready made card bases....


‘THINKING OF YOU TODAY’    

Heartfelt Creations Products And Products Carried On Their Website:
HCDP1- 2109 Window Scenes paper collection
HCDP1-2108 Wild Wilderness paper collection
HCGP1-483 6” x 6” Interlocking Card-White
HCCB1-481 Round Bi-fold Card-White
HCD1-7272 Rounded Sunlight Window
HCD1-7274 Rounded Lattice Window
HCD1-7285 Window Hinges
HCFB1-469 3D Blossom Shaping Mold
HCPC-3839 Furry-Tailed Frolic 
HCD1-7197 Furry-Tailed Frolic
HCPC-3840 Oakberry Cottage & Sentiments
HCD1-7198 Oakberry Cottage & Sentiments
HCDC-3842 Oakberry Lane Blossoms
HCD1-7200 Oakberry Lane Blossoms
HCPC-3845 Just For You Sentiments
HCS1-458-2 Assorted Bright Pearl medium (Yellow)
HCDA1-449 Stack and Store Daubers pack of 6
HCST1-401 Deluxe Flower Shaping Kit
DDOTS Double Dots-3d foam circles
159723 Designer Dries Clear Adhesive
359848 Spellbinders Tool N’ one
85-glitter Crystal Ultrafine Transparent Glitter
3D1844 Crystal Lacquer
478455 Zigg Clean Color Real Brush Makers
RACP451 Coffee Archival Ink

Other Products Used:
Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping Tool, Sheena Douglas White Stamping Card, Spectrum Noir Harmony inks: Frozen Lake, Grasshopper, Pink Tulip, Chinese Red, Winter Rose. Thin Green satin ribbon (2 sorts), Pricking tool.



INSTRUCTIONS:
The finished size of this card is 6” x 6” 
Using the readymade Interlocking card as the card base, take the circle die from the Rounded Sunlight Window die set and the green colored paper for the background from the Window Scenes paper collection. Die cut the circle x 4. Cut these circles in ½ and adhere to the card ½ rounds, both sides. Find the striped paper from the Wild Wilderness paper collection and cut a 5 ½” x 5 ½” square from this paper. Ink the edges of this paper with the Frozen Lake ink. Ink the edges of the inside square with the Chinese Red ink. Now adhere the paper to the inside square as a base.
Taking the white card stock and both the Rounded Lattice ½ dies, using the scalloped outer edge for both dies, die cut x 4 of each die sort. Bring color to the ½ circles using the Chinese Red and the Frozen Lake inks. As seen in the card photo, adhere to all the ½ rounds of the card. Making sure the card folds are free to fold. 
Make the hinges by using the gold card stock and the latches die set. Make enough for each ½ circle edge plus a set for the ribbon slides at both sides of the card. When adhering in place, use the double sided tape and clear drying glue. Adhere the set of gold latches to the card front flaps to the edge for the ribbon slides. Cut enough ribbon to tie around the card and make a bow. This will be about 3-4 times the width of the card front. Thread the ends of all three ribbons through the latches ready to tie the bow.  Adhere the ribbons to the back of the card with a strip of double sided tape.
To make the rest of the embellishments used in this card stamp and die cut the following: 
x 4 medium sized flowers, x 4 smaller sized flowers, x 12 sets of leaves, x 1 of each of the squirrels plus 3 extra cuts for each as extra layers to make them into chipboards, x3 extra cuts for the squirrel and window frame to make them also into chipboards, x 2 of the nut house, x 2 each of the small circle and circle with the scalloped outer edge found in the Oakberry Lane set. (these will be used for the sentiments) Once the embellishments are stamped and die cut, bring color to them by using the Zigg coloring markers.
The colors used are: Caterpillar: 070 Orange, Butterfly:036 Light Blue, 050 Yellow, 090 Grey, Squirrel: 064 Oatmeal, 060 Brown, Nuts and Nut House: 062 Dark Brown, 065 Mid Brown, Grass: 043 Olive Green, Flowers: 047 May green, 050 Yellow, 070 Orange
Window glass: 031 Cobalt Blue, Latches:052 Bright Yellow, Window frames: 068 Deep Brown, Apron: 053 Yellow green, 050 Yellow, Pie:064 Oatmeal, 260 Deep Red.
To make the flowers used for this card: Using the stamp and die sets for the Oak Berry Blossoms flowers and the matching blossom shaping mold. Stamp and die cut enough to use for the card.  Color the elements using the Frozen Lake ink for the flowers and a Zigg maker 046 Mid Green for the leaves. When colored, run the flower petals and leaves through the die cutting machine with the mold. For each flower prick a hole in the centre with a pricking tool and thread the stamens through the hole. Secure the stamens using the hot glue gun. Trimming the stamen threads away and now they are ready to use. Now you can adhere them in place to the card flaps as seen in the card photos.
Ink the sentiment circles with the Chinese Red and the Frozen Lake inks. Stamp the sentiment to the small circle. Adhere both layers together with double sided tape or clear drying glue. Taking the Crystal Lacquer, apply this to the outer edge of the scalloped circle, to all the squirrels and the glass in the windows. Put the embellishments aside to dry (preferably over night). When they are dry and set, adhere in place all the elements used in the inner card square and to the ½ circles flaps as seen in the card photo. For the front right flap, when adhering the squirrel on the rubber wheel tire swing, make sure the ribbon falls under the embellishment and leaves so the ribbon stays in place ready to be tied into a bow later.
To finish the card, apply the diamond stickles to the flower petal edges. When the stickles are dry, close the card and tie the bow.




More details of this card...I made lots so have fun scrolling.















You know what they say....a picture says a thousand words...lol. Well there is a few thousand here.
Wishing you a fun BLACK FRIDAY at Heartfelt Creations....they know how to look after crafters...
Inky love...
Sussi

This year for Nov 29th 2019 BLACK FRIDAY

Heartfelt Creations have new side colletion! 'WINDOW SCENES'
and
 READY MADE CARD BASES


"GOD BE WITH YOU"



Heartfelt Creations Products And Products Carried On Their Website:
Window Scenes paper collection HCDP1- 2109
6” x 6” Swing Card- white HCCB1-482
Luxe Gold Cardstock HCGP1-488
Window Latches die set HCD1-7285
Rounded Window Frame die set HCD1-7271
Create a’Scape Nature stamp set HCPC-3896
Create a’Scape Nature die set HCD1-2770
Circle Basics Large die set HCD1-7155
Classic Rose cling stamp HCPC-3752
Classic Rose die set HCD1-7110
3D Rose Shaping Mold HCFB1-462
Courage And Strength cling stamp HCPC- 3763
All Things Are Possible cling stamp HCPC-3764
Sour On Eagles Wings cling stamp HCPC-3765
Stack and Store Daubers pack of 6 HCDA1-449
Deluxe Flower Shaping Kit HCST1-401
Double Dots-3d foam circles DDOTS
Designer Dries Clear Adhesive159723
Spellbinders Tool N’ one359848
Crystal Lacquer-3D1844
Heat It Craft Tool RAHT
Zig Clean Color Real Brush Markers-36 pack 478455
Embossing Powder-Gold 359760


OTHER PRODUCTS USED:
Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided 3D Foam Tape,
Misti Stamping Tool, Ranger Diamond Stickles, Spectrum Noir Harmony Inks: Damson Wine, Grasshopper, Pine Trees, Foam inking tools. Sheena Douglas White Stamping Card, Crafters companion white pearl cardstock. Versa-mark,

INSTRUCTIONS:

This round card when finished measures 6”x 6”
Taking the ready-made swing card base, cut the last square away and save it for another card. For the circle front, ink the edges of both sides of the card circle with a light coating of the Damson Wine ink with the aid of the foam inking tool or a dauber.
Find the purple colored paper with roses on it used for this card in the paper collection. Cut the paper in four so you have x 2 papers for the card inside and the inside back and x 2 papers for the circle front. The paper with the small roses around the edge as a boarder is used for the back of the card. Adhere in place. The paper with the roses down the side is used for the card square base, this is stamped with the gold embossing powder using the ‘Eagles wings sentiment stamp. Adhere in place.
Use the paper remaining 2 papers and die cut the lace circles using the Round Window frames. Cut x 2 the outer lace die circles and x 1 the inner lace circle from these papers. Cut from the Luxe gold card stock x 2 inner lace circles and x 1 middle lace circle. Cut from the white card stock x 2 middle lace circles. Use the Damson Wine ink to ink the edges of all the paper die cut lace circles. Cut the collection paper inner circle in half, this will be adhered to the back of the gold inner lace circle off center so it shows on both sides of the gold edge.
Taking one of the inked white cardstock circles and adhere this to the back of the card.
For the back of the circle card front, adhere one of the dark paper collection circles to the circle then the inked white cardstock middle lace circle then the gold small lace circle. This is all adhered with double sided tape or clear drying glue
For the card front adhere the outer lace circle from the collection paper with clear drying glue or double-sided tape. The next two layers are adhered with the 3D foam dots. First the middle gold lace circle then the smaller gold lace circle with the cut collection paper lace circles on each side.
Taking the sentiments used, stamp these onto the white cardstock using the gold embossing powder. Die cut these into a circle using the basic circle dies hat fit the stamp. Ink the sentiment s with the Damson Wine ink. Adhere the card front sentiment with the 3D dots and the second sentiment with double sided tape or clear drying glue.
Make the leaves and the roses. You will need x 5 leaf vines and x 3 larger roses, x 5 medium sized roses and x 5 smaller sized roses. Use the 3D shaping mold and the balling tools to bring shape to the roses and leaves. Trim the leaves, as you need to make a boarder bed for the roses to sit on for the card front. For the inside of the card use a small leaf cluster from the off cuts from the leaf vines for the roses. Adhere the roses in place as seen in the card photos.
Using the gold card stock make the hinges used for the card. Place these at the card front fold to strengthen the fold. Do this also for the inside.
Taking the Nature stamp, stamp and die cut the eagle x 2. Color these images with the Zigg marker pens; Light Grey and a yellow then apply the Crystal Lacquer to them. When dry apply a little diamond stickles to the wing tips. Adhere in place.
To finish the card, apply diamond stickles to the GOD in the sentiment on the card front, to the Eagles wings words on the stamped gold embossing sentiment to the card base. Last, to all the rose petal edges.


A few more details of this card.







I have two posts for this BLACK FRIDAY release....such goodies.
See you there.
Hugs

Wednesday, November 20, 2019

Sharing again the WILDERNESS RETREAT collection from Heartfelt Creations

Hi, this week is sending “BEST WISHES”


HEARTFELT CREATIONS PRODUCTS AND PRODUCTS SOLD ON THEIR WEB SITE:

Wilderness Retreat paper HCDP1-2108 
Create a’Scape Trout Lake. HCPC-3895
Create a’Scape Trout Lake. HCD1-2769
Create a’Scape Nature cling stamp. HCPC-3896
Create a’Scape Nature die set. HCD1-2770
Ornamental tags die set. HCD1-7203
Deluxe Flower Shaping Kit. HCST1-401
Stack and Store Daubers pack of 6. HCDA1-449
Double Dots-3d foam circles. DDOTS
Designer Dries Clear Adhesive.159723
Score-Pal Measuring and Scoring Board. 173842
Spellbinders Tool N’ one. 359848
Crystal Lacquer. 3D1844
Zigg Clean   Color Real Brush Makers. 478455
Ranger Archival Ink Library Green. RACP475


OTHER PRODUCTS USED:

Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape,
Misti Stamping Tool, Ranger Diamond Stickles, Spectrum Noir Harmony Inks: Ocean Blue, Grasshopper, Pine Trees. Foam inking tools, Sheens Douglas White Stamping Card.


INSTRUCTIONS:

This completed hinged tent fold card measures 6 ½” x 6 ½” (16.5cm x 16.5cm)
With the Sheena Douglas stamping card make the tent fold card base to the above measurements. Taking the Grasshopper ink and a dauber or a foam-inking tool and ink the card front edges. Find the paper in the paper collection that is 12x12 (30cm x 30cm), a scene of a blue sky, pine trees and mountains in it. Trim the paper to 6” x 6” (15.2cm x 15.2cm) so you still have the trees and mountains in it. Taking the Grasshopper ink, ink the edges of this paper the same as the card front. Adhere this paper layer to the card front with glue or double-sided tape.
The list of stamping (Library Green ink) and die cutting used for this card from the Wild Wilderness Create a’Scape collection sets:
3x the lake and jumping trout scene, 2x the rock and plant boarder and 4x the bulrush boarder from the Trout Lake sets.
2x the rabbits and 1x the fox from the Nature sets.
The sentiment is from the Ornamental tags die set. This is die cut x4 from the white card, adhere the layers together then inked with both the ocean blue and the grasshopper inks. Apply a layer of crystal clear, set aside to dry. When dry wrap the card with 3 lengths of string (x4 lengths of the card), thread the sentiment in to the string then tie a bow
The detailed images are colored using the zigg markers the finishing of the trees, boarders and the water also to give more depth, apply to the harmony inks.
The sentiment, rabbits, the fox and the front pine trees are finished with an application of crystal clear so they will pop when adhered to the card. The Trout is finished both with diamond stickles and the crystal clear.
Adhere all the elements in place, starting with the Lake. The first layer: Die cut out the trout and the rocks. Then the scene is cut in ½ and adhered to the card so there is a gap in the center of the scene. The second layer: Die cut the trees away and the lake. Adhere in place so the gap is covered. Layer the trees as seen on the card photo. Use the double dots to adhere the trout and rocks in place on the lake. With the double dots also adhere the lake in place. Adhere the bulrushes in place, trimming away what is not needed and adding to fill the gaps to each side of the lake. Adhere the rock and grass boarders in place at the foot of the card. Adhere the rabbits and the fox in place. Using the balling tools as needed to give life to the elements.
To finish the card apply the diamond stickles to the flowers, bulrushes and to the mountaintops.



 This collection is such fun...so many ways to play with it. Go to Heartfelt Creations blg to find more and keep posted till next week.
Till then, inky scrappy sussipoppins hugs. 
Susan




Wednesday, November 13, 2019

The new collection for November WILD WILDERNESS

‘SENDING YOU A HUG’  

Heartfelt Creations Products And Products Carried On Their Website:

HCDP1-2108 Wilderness Retreat paper collection
HCPC-3893 Create a’Scape Background
HCD1-2767 Create a’Scape Background
HCPC-3894 Create a’Scape Wilderness
HCD1-2768 Create a’Scape Wilderness
HCPC-3895 Create a’Scape Trout Lake
HCD1-2769 Create a’Scape Trout Lake
HCPC-3896 Create a’Scape Nature cling stamp
HCD1-2770 Create a’Scape Nature die set
HCPC-3848 Cheerful Note Sentiments cling stamp set
HCDA1-449 Stack and Store Daubers pack of 6
HCST1-401 Deluxe Flower Shaping Kit
DDOTS Double Dots-3d foam circles
159723 Designer Dries Clear Adhesive
173842 Score-Pal Measuring and Scoring Board
359848 Spellbinders Tool N’ one
3D1844 Crystal Lacquer
478455 Zigg Clean Color Real Brush Makers
RACP451 Coffee Archival Ink
RACP475 Ranger Archival Ink Library Green



Other Products Used:
Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape,
Misti Stamping Tool, Ranger Diamond Stickles, Spectrum Noir Harmony Inks: Ocean Blue, Grasshopper, Pine Trees. Foam inking tools, Sheens Douglas White Stamping Card.


INSTRUCTIONS: 
This completed hinged tent fold card measures 6 ½” x 6 ½” (16.5cm x 16.5cm)
 With the Sheena Douglas stamping card make the tent fold card base to the above measurements. Taking the Ocean Blue ink and a dauber or a foam inking tool and ink the card front edges. Find the paper in the paper collection that is 12x12 (30cm x 30cm) A background with the blue sky and the pine trees to the right and a trout jumping out of the water in it. Trim the paper so you have the trees to the right and the water to the left to 6” x 6” (15.2cm x 15.2cm). With the coffee ink and the sentiment, stamp the sentiment to the right top of the paper. Taking the Ocean Blue ink, also ink the edges of this paper as the card front. Adhere this paper layer to the card front with glue or double-sided tape.
 The list of stamping (Library Green ink) and die cutting used for this card from the Wild Wilderness Create a’Scape collection sets:
2x the flower boarder and the flying eagle from the Nature sets.
2x the rock and plant boarder from the Tout Lake sets.
2x the water wheel and house, 1x the wolf, 3x the mountains and 1x the tree from the house and boat from the Wilderness sets.
 The detailed images are colored using the zigg markers the finishing of the trees and the water also to give more depth, apply to the harmony inks. The house, wolf and eagle is finished with an application of crystal clear so they will pop when adhered to the card.
 Adhere all the elements in place, starting with the house and water wheel with the lake to the card base. Adhere the mountains in place trimming as you go to get them to how you want them across the background. Add the extra cuts of trees and house. Adhere the flower boarders and the flower and rock boarders also trimming as you go to get a balance across the foot of the card also to cover any unwanted print in the paper. Adhere the wolf between the tuffs of rocks, grass and flowers.
 To finish the card apply the diamond stickles to the eagle wings, the windows in the house, the top of the rocks, the flowers, the trout and the mountaintops.


If you are an outdoors person or if you know someone special that is...this is a perfect collection for a project or a card to be given.
Next week we have more of this eye candy to enjoy....see you then.
Sussipoppins inky hugs.
XOX



Wednesday, November 6, 2019

Using the SEA BREEZE collection from Heartfelt Creations....


“Get Well Wishes”

Heartfelt Creations Products And Products Carried On Our Website:
HCDP1-2107 Sea Breeze paper collection
HCPC- 3890 Sea Breeze Harbor cling stamp set
HCD1-7264 Sea Breeze Harbor die set
HCPC-3891 Sand and Sunsets cling stamp set
HCD1-7265 Sand and Sunsets die set
HCPC- 3892 A Day At Sea cling stamp set
HCD1-7266 A Day At Sea die set
HCPC-3842 Oakberry Lane Blossoms cling stamp set
HCD1- 7200 Oakberry Lane Blossoms die set
HCFB1-469 3D Blossoms Shaping Mold
HCD1-7201 Ticket And Tags die set
HCPC-3848 Cheerful Note Sentiments cling stamp set
HCS1-459-4 Rock candy (black)
HCDA1-449 Stack and Store Daubers pack of 6
HCST1-401 Deluxe Flower Shaping Kit
DDOTS Double Dots-3d foam circles
159723 Designer Dries Clear Adhesive
173842 Score-Pal Measuring and Scoring Board
359848 Spellbinders Tool N’ one
31510 Funnel tray
85-glitter Crystal Ultrafine Transparent Glitter
3D1844 Crystal Lacquer
478455 Zigg Clean Color Real Brush Makers
RACP500 Ranger Archival Ink Sepia

Other Products Used:
Diamond stickles, Sheena Douglas white stamping card, Hot glue Gun, Fussy cutting Scissors, Double sided Tape, Double Sided Foam Tape, Misti Stamping Tool, Old water painting brush (To apply glue) Spectrum Noir Harmony Ocean Blue ink. Foam inking tool.


INSTRUCTIONS:
The finished size of this tent fold card is 6 ¼” x 7 ½”  (16cm x 19cm)
Make a tent fold card from the above measurements with the white stamping card. Taking the Ocean blue ink and inking tool, ink the edges of the card front. Find the paper from the Sea Breeze collection with a blue and green print. Trim this a little smaller than the card base measurement. Ink the edges of this paper also. Adhere to the card front.
Taking a piece of white stamping card, cut this to 4 ½” x 5 ½” (11.5cm x 14.5cm) for the card front. Take the frame stamp and die from the Day At Sea set. Stamp and die cut the inner frame part of the die so you have a hole in the card. Color this and ink the outer edges with the Ocean blue ink.
How to make the flowers for this card: Take the stamp and die collection set for these flowers and the matching blossom shaping mold. Stamp and die cut enough to use for the card. Color the elements using the (Yellow) zigg marker pen and a water pen for the flowers and a green color marker for the leaves. When colored, run the flower petals and leaves through the die cutting machine with the mold.  For each flower prick a hole in the centre with a pricking tool and thread the stamens through the hole. Secure the stamens using the hot glue gun. Before trimming the stamen threads away apply glue to the petal edges with the old water brush, dip the petals in the glitter and put aside to dry. When dry trim away the threads, now they are ready to use.




Make all the remaining elements used in this card by using the stamp and die sets listed. Cutting extra layers for depth in the elements. Adhere together and color so they are ready to adhere to the card front. Stamp and cutting list: x1 Moored boat, x2 Fences, x1 Perching seagull plus x2 extra cuts, X1 Sentiment, x3 Flying seagulls plus x3 extra cuts, x3 grass tuffs, x1 Sunset with boats plus x2 extra cuts, x3 Med flowers, x1 Small flower, x2 Leaf sets.
Before adhering the card front to the card base, adhere the ready-made scene the card base, layering the tuffs of grass and the fence. Trimming as needed. Placing the cut out frame in its place to see if all is aligned in the frame before gluing down the elements. Adhere with the 3D glue dots to raise the frame from the card base.
Adhere the perched seagull to the left of the frame behind the lifesaver ring, the fences across the front and under the frame. The sentiment is stamped then die cut up side down so the hole in the tag can be trimmed away. Adhere this to the side of the fence on the right. The moored boat is placed to the centre right to cover any untidy ends of the elements. Adhere the seashells to the bottom edge of the card. Adhere the flying seagulls in their place to the left and right of the frame. The flowers are placed in clusters to the right and left of the card. Apply diamond stickles and Crystal Lacquer to the elements as seen in the card photo.

Next week we have a new release...if you like to make scenes....this is for you. 
Till then sussipoppins hugs
Susan XX



(A sneaky peaky for next week)