Wednesday, February 26, 2020

FEB 26th brings you more of the ...

...'BEAU-TEA-FUL' TEA  TIME COLLECTION


Hi, this tea pot stamp used for this card is fantastic...it can also be used to make a mini book or a card on it's own....enjoy your visit today.

HEARTFELT CREATIONS PRODUCTS AND PRODUCTS CARRIED ON THEIR WEBSITE:
HCDP1-2112 Tea Time Paper Collection
HCPC-3903 Special Tea Pot cling stamp
HCD1-7286 Special Tea Pot die set
HCPC-3904 My Cup Of Tea cling stamp set
HCD1-7287 My Cup Of Tea die set
HCD1-7214 Ornate Pocket Accents die set
HCST1-1449 Stack and Store Daubers Pack of 6
359760 Gold embossing Powder
RACP Sepia Ranger Archival Ink
Zigg Clean Color Real Brush
173842 Scor-pal Measuring and scoring board
DDOTS 3Ddouble side  foam dots

OTHER PRODUCTS USED:
Spectrum Noir Harmony Inks: Lemon Tonic, Straw Bale and Smoked Pearl. Yellow organza ribbon, Vers-a-mark, Golden Rod Stickles, White card Stock, 3D foam tape, Foam inking tool.


INSTRUCTIONS:

This tent fold card measures 6 ¾”x 8 ½”/ 17cm x 21.5cm.
Taking the white card stock make the card base to the above measurements. Make also the lace frame by using the Ornate pocket accents, die cut the frame pieces about ½”/ 1.5cm apart from each cut to make a frame to fit the card front. Find from the paper collection the back ground that is yellow. Cut this a little smaller than the card front. Using the Tonic lemon and the Smoked pearl ink and the inking tool, ink the edges. Of all layers. Adhere together to the card base.
To make the elements used for this card: Using the gold embossing powder stamp, and die cut the tea pot twice, one for the base and the other for the lid and sentiment tag, the two tea cups and two spoons
Bring color to the elements using the zigg brushes, Vanilla, Lilac, Light green, Brick beige or other colors you might like. Adhere the tea pot to the card front then the tea pot lid and the sentiment tag using the 3D foam dots or tape. Adhere a bow across the card then add the spoons and the tea cups. To finish the card apply the golden rod stickles to the cups, tea pot and spoons.




Is this not...or is this wonderful. You can do so much with this stamp and die set.
Till next week with more eyecandy...
happy scrappy days and inky hugs from Sussi




Wednesday, February 19, 2020

FEB 19th and Heartfelt Creation bring you some more inspiration with....

 the Tea Time collection and gold embossing...love it!


' YOURE TEA-RRIFIC ' 

HEARTFELT CREATIONS PRODUCTS AND PRODUCTS CARRIED BY THEIR WEBSTORE:
HCDP1-2112 Tea Time Paper Collection
HCPC-3905 Elegant Tea Pot cling stamp set
HCD1-7288 Elegant Tea Pot die set
HCD1-7281 Stairway Gardens die set
HCD1-7285 Courtyard Elegance
HCD2-749 Cut Mat Create 1a
85-glitter Crystal Ultrafine Transparent Glitter
159951 Designer Dries Clear Adhesive
RLHS100 Hydra-Sponge
359848 Spellbinders Tool N’ One
RACP5005 Sepia Ranger Archival Ink
359760 Gold embossing Powder

OTHER PRODUCTS USED:
Inks: Spectrum Noir Tri-blend markers: Dull Green, Pale Pink, Lavender, Ice Grey. Fussy cutting scissors, Foam inking tools, Vers-a-mark, white card stock, Diamond stickles.


INSTRUCTIONS:

This tent fold card measures 61/4”x 6 ¼” / 16cm x 16cm.
Taking the white card stock make the card base using the above measurements. Make the lace frame using the outside the outer edge from the Stairway die set and the inner square die from the Courtyard Elegance die set. Cut these together. Find the paper with the sentiment on it, cut the piece with the sentiment and the above print with the teapot on it. Taking the 3.25”x .75” die from the Cut Mat Create 1a set and die cut the sentiment out of the paper. Die cut this shape x4 extra from the white card stock. Adhere the layers together to make a chippie. Find also from the paper collection, the paper with the sentiments printed on the page. Cut to the same size as the card front. Taking the Milled lavender ink and foam inking tool ink all the edges of the above. Taking the clear drying adhesive and the hydra sponge bring the adhesive to the white card stock die cut lace. When dry adhere all to the card front using the 3D foam dots or tape, except the sentiment.
To make all the embellishments for the card: Stamp using the gold embossing powder the larger teapot, x1 of the flower boarder, x4 flower clusters. Using the Tri-blend markers or other markers or pencils bring color to the elements.
Order of placement for the elements: Cut the flower boarder in half to fit the cluster. Adhere to both side of the sentiment that has been cut out on the card front. Trim two  flower clusters in half, these are to be adhered under the flower boarder pieces under the sentiment. Adhere the sentiment in place.  Adhere the teapot with foam 3D dots to the card. Taking the remaining flower clusters, these are to be adhered to the flowers on the teapot and to the foot at the left. Add diamond stickles to the flower centers for attention.


Adorable with all the cut outs you can make using this collection. We all know how I love to layer...and this card you can send in the normal mail...lol 
Till next week, inky hugs from Sussi P


Wednesday, February 12, 2020

Inspiratin Wednesday agian with Heartfelt CReations

....and what a collection! 
The 'TEA TIME ' collection...one word...adorable.


HEARTFELT CREATIONS PRODUCTS AND PRODUCTS CARRIED ON THEIR WEBSITE:
HCDP1-2111 Tea Time Paper Collection
HCPC-3903 Special Tea Pot cling stamp
HCD1-7286 Special Tea Pot die set
HCPC-3904 My Cup Of Tea cling stamp set
HCD1-7287 My Cup Of Tea die set
HCPC-3905 Elegant Tea Pot cling stamp set
HCD1-7288 Elegant tea Pot die set
HCD2-7191 Intricate Swirl Frames die set
85-glitter Crystal Ultrafine Transparent Glitter
RLHS100 Hydra Sponge
RACP 5005 Sepia Ranger Archival Ink
DDOTS  3D double sided foam Double Dots
159951 Designer Dries Clear Adhesive


OTHER PRODUCTS USED:
Distress Inks: Faded jeans, Bundled sage, Faded jeans, Milled lavender, Victorian velvet. Dimond stickles, White card stock, Foam inking tools, Fussy cutting scissors.


INSTRUCTIONS:

This tent fold card measures 8 ½”x 6 ¾”/ 21.7cm x 17.1cm.
Taking the white card stock make a card base to the above measurements. Taking the paper collection and find the paper with the blue, lavender and green in the sky. Trim this to 7 ½ “ x 5 ¾” / 19.2cm x 15cm. ink the edges with the faded jeans ink and a foam inking tool. Adhere this to the card front using 3D foam tape or dots. Taking the white card stock and the frame die from the Intricate Swirl Frame set and die cut the large frame. Ink this also with Faded jeans and the Milled lavender inks. Apply clear drying admissive to the frame lace edges using the hydra sponge. Sprinkle glitter over the edge. When the glitter is dry adhere to the card front using the 3D foam tape or dots.

To make all the embellishments for this card: Stamp using the sepia ink, x1 each of the small teapots, x3 of the flower boarders, x2 of the flower clusters, x1 of the teacup boarder, x1 of the sentiment tag and sentiment. Color the embellishments using distress inks: The teapots, teacups and sentiment tag with the Faded linen. For the flowers and leaves use the Faded jeans, Bundled sage and Victorian velvet. A dot of yellow zigg brush to the blue flower centers. Apply a dot of adhesive to the teacups, teapots and flower centers then sprinkle with the glitter. The yellow flower centers are dotted with the diamond stickles but you could also use glitter for this.

The order of adhering the embellishments to the card front. 1st the larger teapot then the two of the flower boarders. The smaller teapot and sentiment tag. The 3rd flower boarder and teacups. Trim and fussy cut the flower clusters to fit under the sentiment tag and under the boarder next to the large teapot to fill the gaps.




I told you so....adorable!


Inky hugs from me to you, till next week.
OXO










Wednesday, February 5, 2020

A EXTRA FOR THIS MONTH....... BACKGROUND DIE'S LAUNCH


COTTAGE GARDEN COLLECTION
BEST WISHES 


Heartfelt Creations Products And Products Carried On Our Website:
HCDP1-2110 Cottage Garden paper collection
HCFB1-489 3D Hydrangea Shaping Mold
HCD1-7278 Cottage Garden Hydrangea die set
HCD1-7279 Fresh Cut Hydrangea die set
HCPC-3902 Cottage Window and Hydrangea cling stamp
HCD1-7280 Cottage Window and Hydrangea die set
HCD1-7285 Courtyard Elegance die set
HCD1-7203 Ornamental Tags die set.
HCD1-7281 Stairway Gardens die set
HCST1-401 Dluxe Flower Shaping Kit
HCDA1-449 Stack And Store Daubers
 ANC818 Prills  Go-Man-Go
31510 Funnel Tray
159723 Designer Dries Clear Adhesive
DDOTS Double Sided 3D Foam Dots
RACP475 Ranger Archival Library Green
409311 Color In Water Brush-fine
RLHS100 Hydra Sponges
173842 Score-pal Measuring And Scoring Board
85-glitter Crystal Ultrafine Transparent Glitter
3D1844 Crystal Lacquer
NU822 Pacific Teal  Nuvo Mousse
NU802 Indian Gold Nuvo Mousse

OTHER PRODUCTS:
Hot glue gun, Double sided tape, Double sided 3D foam tape, Sheena Douglas White Stamping Card,  Foam inking tool, Diamond tickles, Ranger Archival Ink Maroon. Nuvo Embellishment Mousse: Orange Blush, Persian Red, Powder Blue, Spring Green, Burnished Bronze, Coral Calypso.


INSTRUCTIONS:

The measurements for this complete tent fold hinged card is 6 ½”x 8 ¼” (16cm x21cm) All the embellishments are colored with the mousse as water color using the water pen.
Taking the white card make the hinged card to the above measurements. Apply the Maroon ink to the card base front edges. Find the outer die from the Stairway Gardens die set. Die cut this twice from the white card, trim so when adhered together this will measure 7 ¼” in the length, making an oblong shape. Apply glitter to the outer edges and when dry adhere to the card front with double sided tape. Find the blue printed background paper in the Cottage Garden collection, cut this to measure the same as the oblong above. Adhere this to the card front using the 3D foam dots. Die cut also the circle backgrounds and two small squares  found in the die set from the same blue paper. Taking the white card and the Courtyard Elegance die set, die cut the lace square twice. Trim the squares so they will fit to the blue background paper oblong. Apply glitter to the two die cuts. When dry adhere to the blue background. Taking the white card and the lace circle from the same die set, die cut two circles .Also cut two background circle from the blue paper. Trim the circles so they will fit into the now oval shape in the card font. Apply the glitter to the white die cuts. When dry adhere both the lace and blue paper pieces to the card front oval with 3D foam dots.
Make all the embellishments for the decoration of this card by stamping coloring and die cutting: 1x the bird on the branch, x31 petals (prills will be added to the petal centers), x2 the curved boarder and x5 the strait boarder (color only the leaves a this is for the extra leaves used as fillers) 3x the window and shutters(color only one of these as the layers will be stacked and adhered together) X4 the sentiment (fussy cut away the outside so you have only the words then adhere all the layers together)Adhere the window to the card front so it covers the join in the oval. Fussy cut away the birds and adhere them to the window. Arrange the curved boarder above the window and adhere. Fussy cut leaves and add them behind the window shutters, under the birds and on top of the window. Adhere the sentiment to the card. To finish, apply the crystal lacquer to the birds. To finish the card, apply the diamond stickles to the sentiment.